A roast cooking time calculator tells you how long to roast a cut of beef, pork, lamb, veal, ham or specialty poultry, so you can plan the meal and know when to start. Pick the cut, enter its weight, and the calculator multiplies the weight by the minutes per pound in the USDA's holiday meat roasting chart. It also shows the oven temperature, the safe internal temperature and the rest time, and, if you enter a serving time, when the roast should go in. Pounds and °F are the default, and you can switch to kilograms and °C.
How the roast cooking time calculator works
Most roasts in the chart are timed in minutes per pound. The calculator gives a range: the weight × the lower figure to the weight × the higher figure. A few cuts, such as beef tenderloin, pork tenderloin and Cornish hens, have a set total time instead, because their thickness matters more than their weight.
USDA's Food Safety and Inspection Service says roasting is the recommended way to cook tender meats. The meat goes on a rack in a shallow, uncovered pan, and most roasts cook at 325 °F. The USDA doesn't recommend oven temperatures below 325 °F for meat and poultry, because the food could stay too long between 40 °F and 140 °F, the "Danger Zone" where bacteria multiply quickly.
Roasting times by cut
| Cut | Oven | Timing |
|---|---|---|
| Beef rib roast, bone-in (4 to 8 lb) | 325 °F | 23 to 30 min/lb |
| Beef rib roast, boneless (4 lb) | 325 °F | 39 to 43 min/lb |
| Beef eye round (2 to 3 lb) | 325 °F | 20 to 22 min/lb |
| Beef tenderloin, whole (4 to 6 lb) | 425 °F | 45 to 60 min total |
| Lamb leg, bone-in or boneless | 325 °F | 20 to 26 min/lb |
| Lamb crown roast (3 to 4 lb) | 375 °F | 20 to 30 min/lb |
| Pork loin, bone-in (3 to 5 lb) | 325 °F | 20 to 25 min/lb |
| Pork loin, boneless (2 to 4 lb) | 325 °F | 23 to 33 min/lb |
| Pork tenderloin (½ to 1½ lb) | 425 °F | 20 to 30 min total |
| Veal loin, bone-in (3 to 4 lb) | 325 °F | 30 to 34 min/lb |
| Venison roast (3 to 4 lb) | 325 °F | 20 to 25 min/lb |
The calculator also covers rib roast boneless, half tenderloin, pork crown roast, hams, veal rump or shoulder, capon, duck, goose and Cornish hens.
Safe internal temperatures
The time is only a plan. The USDA says to cook raw beef, pork, lamb and veal roasts to at least 145 °F, measured with a food thermometer, then let the meat rest for at least three minutes before carving. Other cuts differ:
- Ham that must be cooked before eating: 145 °F, then rest at least 3 minutes.
- Fully cooked ham, reheated: 140 °F.
- Venison: 160 °F.
- Capon, duck, goose and Cornish hens: 165 °F.
You can cook meat to a higher temperature if you like it more done. In metric mode the temperatures are rounded to the nearest degree: 145 °F is 63 °C and 325 °F is 163 °C.
Worked example: a 6 lb rib roast
You have a 6 lb bone-in beef rib roast and want to eat at 6:00 PM.
- Timing: 23 to 30 minutes per pound at 325 °F.
- 6 × 23 = 138 minutes and 6 × 30 = 180 minutes, so 2 h 18 min to 3 h.
- Add the 3 minute rest to the longer time: 183 minutes.
- Start by 2:57 PM (shown as 14:57) so it's ready on time even if it takes the full 3 hours.
Start checking the temperature near the shorter time, 2 h 18 min. When the thickest part reads 145 °F, take it out and let it rest. In metric, a 2.7 kg boneless pork loin is about 5.95 lb, which is more than the 2 to 4 lb the chart lists, so the calculator gives a time and warns that it's rougher than usual.
Bone-in or boneless?
The FSIS notes that boned and rolled meats need more time per pound than bone-in cuts, because heat takes longer to get through solid meat. That's why a boneless rib roast is listed at 39 to 43 minutes per pound, against 23 to 30 for bone-in. Pick the right version of the cut for the best estimate.
Tips for planning the roast
- Weigh the roast, or read the weight off the label, before you start.
- Use a food thermometer in the thickest part, away from bone and fat.
- Let the oven heat fully before the roast goes in.
- Plan extra time for the side dishes that share the oven.
Hams, veal and specialty poultry
Hams come in two kinds. A cook-before-eating ham is raw and must reach 145 °F, then rest for at least three minutes. A fully cooked ham only needs reheating, to 140 °F. Whole bone-in hams of 14 to 16 pounds take 18 to 20 minutes per pound if raw, and 15 to 18 minutes per pound to reheat if fully cooked. A boneless fully cooked ham of 3 to 4 pounds takes longer per pound, 27 to 33 minutes.
For poultry other than turkey, the chart gives capon 20 to 30 minutes per pound at 375 °F, a domestic duck 20 minutes per pound at 375 °F, and a goose 20 to 25 minutes per pound at 325 °F. Cornish hens of 18 to 24 ounces take 50 to 60 minutes in total at 350 °F. All of these should reach 165 °F. For a turkey, use the turkey cooking time calculator, which has its own USDA chart.
Common mistakes
- Trusting the clock alone. Ovens and roasts vary, so the thermometer decides.
- Roasting below 325 °F. USDA advises against it for meat and poultry.
- Using bone-in times for a boneless roast. Boneless cuts need longer per pound.
- Skipping the rest. Cuts that need a rest should stand at least 3 minutes before carving.
What next
Use this often? Add Roast Cookin to your Home screen.
Frequently asked questions
How does the roast cooking time calculator work?
It multiplies the roast's weight by the minutes per pound in the USDA roasting chart for that cut, giving a shortest and longest time. Tenderloins and Cornish hens use a set total time.
How long do I cook a roast per pound?
It depends on the cut. A bone-in beef rib roast takes 23 to 30 minutes per pound at 325 °F, a boneless pork loin 23 to 33, and a leg of lamb 20 to 26.
What temperature should a roast reach?
Beef, pork, lamb and veal roasts should reach at least 145 °F on a food thermometer, then rest at least 3 minutes. Venison should reach 160 °F and poultry 165 °F.
What oven temperature should I roast at?
Most cuts in the USDA chart roast at 325 °F. Tenderloins roast at 425 °F, and lamb crown roast and capon at 375 °F. USDA doesn't recommend going below 325 °F.
Does a boneless roast take longer?
Yes, per pound. Boned and rolled meat takes longer because heat has to reach the center through solid meat.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.