This steak cook time calculator tells you how long to grill a steak, based on the official grilling chart from Beef. It's What's For Dinner. Choose the cut, its thickness and whether you're using a charcoal or gas grill, and the steak cook time calculator gives the approximate total grilling time for medium rare to medium, the temperature to take the steak off the grill and how long to let it stand.
How to use the steak cook time calculator
- Choose the steak cut.
- Choose its thickness; the options depend on the cut.
- Choose charcoal or gas.
- Press Calculate.
Where the times come from
The times come from the grilling guidelines in Beef. It's What's For Dinner's Confident Cooking with Beef guide, which lists the approximate total cooking time for each cut and thickness for medium rare (145 °F) to medium (160 °F), on both charcoal and gas grills. The guide notes that its gas grill guidelines were developed using Weber Genesis gas grills and that gas grill brands vary greatly, so times may need adjusting; your grill's manual may help.
Thicker steaks: when to take them off
For the thickest steaks, the chart says to take the steak off the grill a little before it reaches the final temperature, because it keeps cooking as it rests. For 1½-inch ribeye, porterhouse, T-bone and tenderloin steaks, remove them at 140 °F for medium rare or 155 °F for medium. For a 1½-inch top sirloin, remove it at 135 °F for medium rare or 150 °F for medium. In each case, let the steak stand for 5 minutes before serving.
Worked example
Say you're grilling a 1-inch boneless ribeye over charcoal. The chart gives about 10 to 14 minutes in total for medium rare to medium, or 9 to 14 minutes on a gas grill. A 1½-inch porterhouse on a gas grill takes about 20 to 25 minutes; take it off at 140 °F for medium rare or 155 °F for medium and let it stand for 5 minutes. A ¾-inch strip steak takes about 7 to 10 minutes on either grill.
Charcoal heat
For charcoal grilling, the guide says to wait until the coals are medium and ash-covered, about 30 minutes, then spread them in a single layer. To check the temperature, hold the palm of your hand above the coals at cooking height and count how many seconds you can keep it there before the heat makes you pull away: about 4 seconds means medium heat, which is what the chart's times assume.
Avoid charring
The guide recommends trimming visible fat before grilling to help prevent flare-ups. If you grill over too high a heat, the outside can become overcooked or charred before the inside reaches the doneness you want, and it doesn't recommend charring. If your steak is browning too fast, move it to a cooler part of the grill to finish.
Use a thermometer
Times are a guide, because grills, weather and the exact thickness of each steak all make a difference. An instant-read meat thermometer is the most reliable way to know when a steak is done. Insert it horizontally into the thickest part of the steak, away from any bone, and check a few minutes before the shortest time.
Turning the steak
The times in the chart are total grilling times, so turn the steak partway through to cook both sides evenly. Use tongs rather than a fork, so you don't pierce the meat and lose juices.
Reading the results
The big number is the approximate total grilling time on the grill you chose. The table shows the time on the other type of grill, the temperature to take the steak off and how long to let it stand.
Choosing a cut
The chart covers tender cuts that grill well as steaks. Ribeye, porterhouse, T-bone, strip and tenderloin steaks come from the rib and loin, while top sirloin and tri-tip come from the sirloin. Chuck eye and Denver steaks are from the chuck. Leaner cuts from the round are best marinated, and the chart recommends cooking round cuts to medium rare only; they aren't included here because they need a marinade. If your cut isn't listed, use the time for a cut of similar thickness and check with a thermometer.
Bone-in versus boneless
For ribeye, the chart lists bone-in and boneless steaks separately. At ¾ inch the times are similar, but at 1½ inches a bone-in ribeye takes a little longer over charcoal, about 19 to 24 minutes against 16 to 20 for boneless. Check the temperature away from the bone.
Planning a meal
If you're grilling several steaks of different thicknesses, start the thickest ones first, so they all finish at about the same time. Remember to allow 5 minutes of standing time for thick steaks, and use that time to finish side dishes or slice bread.
Common mistakes
- Guessing thickness. Measure the steak.
- Grilling over too high a heat. The outside chars before the inside cooks.
- Skipping the rest. Let it stand 5 minutes.
- Relying on time alone. Use a thermometer.
Tips
- Trim visible fat to reduce flare-ups.
- Check doneness a few minutes early.
- Keep notes on your own grill's timing.
What next
Use this often? Add Steak Cook T to your Home screen.
Frequently asked questions
How does a steak cook time calculator work?
It looks up the Beef. It's What's For Dinner grilling chart for the cut, thickness and grill type.
How long to grill a 1-inch ribeye?
About 10 to 14 minutes over charcoal, or 9 to 14 minutes on gas, for medium rare to medium.
When should I take a thick steak off the grill?
For 1½-inch ribeye or porterhouse, at 140 °F for medium rare or 155 °F for medium, then let it stand 5 minutes.
What temperature is medium rare steak?
The chart's times are for medium rare at 145 °F to medium at 160 °F.
How long should steak rest?
The chart says to let thick steaks stand for 5 minutes.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.