A pool shock calculator works out how much shock to add to a pool or a spa to remove combined chlorine, by a method called breakpoint chlorination. Enter the volume of the water, the total chlorine and the free chlorine from your test, and choose liquid sodium hypochlorite or calcium hypochlorite. The calculator gives the combined chlorine, the adjustment level and the amount of shock to add. It applies the CDC definition of combined chlorine and the rule that breakpoint chlorination raises free chlorine to ten times the combined chlorine, with a dose per 10,000 gallons. It runs in your browser and nothing you enter is sent anywhere.
How to use the pool shock calculator
- Choose US or Metric units and the shock product.
- Enter the volume of the pool or spa.
- Enter the total chlorine and the free chlorine in ppm from your test kit.
- Press Work out the shock.
The formulas
Combined chlorine is the total chlorine minus the free chlorine. [1] Both the CDC and NSW Health say that during superchlorination, also called breakpoint chlorination, the free chlorine should be raised to ten times the combined chlorine. [1] [2] Our own working turns this into a dose: the adjustment level is the combined chlorine times 10, minus the free chlorine already in the water, in parts per million. For liquid sodium hypochlorite at 12.5 percent, the amount is 10.7 fluid ounces times the pool volume divided by 10,000 gallons, times the adjustment level. The Pool and Hot Tub Alliance gives about 10.6 fluid ounces of 12.5 percent product for roughly 1 ppm of free chlorine in 10,000 gallons, so our figure is within one percent of it. [3] For calcium hypochlorite at 65 to 75 percent, we use 2.0 dry ounces on the same basis; that figure is our own working, so check it against the label of your product.
Worked example
Our worked example is a pool of 30,000 gallons with an adjustment level of 19 ppm, using liquid shock. The pool volume divided by 10,000 is 3, so the amount is 10.7 times 3 times 19, which is 609.9 fluid ounces, or about 4.76 US gallons of 12.5 percent liquid. To get an adjustment of 19, you can enter a total chlorine of 3 ppm and a free chlorine of 1 ppm, since the combined chlorine is 2, and 2 times 10 minus 1 is 19. With calcium hypochlorite, the same pool needs 2.0 times 3 times 19, which is 114 dry ounces, or about 7.1 pounds.
When no shock is needed
Most city, county and state health departments limit combined chlorine to 0.4 ppm or less. [1] If the combined chlorine is zero or very low, the adjustment level is zero or negative, and breakpoint chlorination is not needed. The calculator tells you this instead of giving an amount. The calculator also checks that the total chlorine is not lower than the free chlorine, since the test then has a mistake in it.
Safety and timing
NSW Health says to adjust the pH to 7.5 or lower before adding chlorine, to run the circulation and filtration overnight so that the chloramines are oxidized by morning, and to superchlorinate only after the pool is closed to swimmers for the day. [2] The CDC likewise says to close the pool to swimmers first and to make sure the swimming area is well ventilated. [1] Afterward, swimmers should not enter until the tested chlorine is 4 ppm or less. [3] A normal free chlorine level to return to is 1 to 3 ppm. [4]
Adding the product
With liquid sodium hypochlorite, the circulation system should be running, and you should pour slowly in the deep end, close to the water surface and away from metal rails, ladders and lights, wearing gloves and goggles. [3] Always follow the instructions on the label of your own product, including calcium hypochlorite, since strengths and directions vary.
Reading the result
The calculator shows the combined chlorine and the adjustment level in parts per million, then the amount of shock to add. For liquid shock, the amount is in fluid ounces and in US gallons. For dry shock, it is in ounces and in pounds. The adjustment level is not the amount of chlorine to add in ppm; it is the figure we use to scale the dose, together with the volume of the pool.
What combined chlorine is
Chlorine in a pool is found in two forms. Free chlorine is the part that is available to clean the water, and combined chlorine is the part that has already reacted with other things in the water. The CDC works out the combined chlorine in the same way, as the difference between the total and the free chlorine. [1] A high combined chlorine can be a sign that the pool needs shocking, which is what the calculator helps with.
Measuring the chlorine
You need a test kit that reads both total and free chlorine, such as a drop-count kit or test strips that show both. Test the water before you shock it, and write down the two readings.
Metric entries
The doses above are per 10,000 US gallons. If you choose metric units, the calculator changes the volume in litres into gallons first, using 3.785 litres to the gallon, and then applies the same formulas. The amounts are shown in US fluid ounces, gallons, ounces and pounds, since those are the units of the formulas. Convert them with our weight and volume converters if you need other units.
Before and after
Check the pH before you shock, and bring it to 7.5 or lower first. After shocking, let the pump run, keep the pool closed to swimmers, and test the free chlorine again until it is 4 ppm or less.
Common mistakes
- Using the wrong product strength. The amounts are for 12.5 percent liquid and 65 to 75 percent dry.
- Mixing chemicals. Never mix different products together.
- Swimming too soon. Wait until the tested chlorine is 4 ppm or less.
- Skipping the pH check. Bring the pH to 7.5 or lower before shocking.
What next
Use this often? Add Pool Shock to your Home screen.
Frequently asked questions
What is a pool shock calculator?
A tool that works out how much shock to add to a pool to remove combined chlorine, by breakpoint chlorination.
How do you calculate the adjustment level?
Combined chlorine (total − free) times 10, minus the free chlorine, in ppm.
How much liquid shock for a 30,000 gallon pool and an adjustment of 19 ppm?
About 610 fluid ounces, which is 4.76 US gallons of 12.5 percent liquid.
How long should I wait before swimming?
Wait until the tested free chlorine has fallen to 4 ppm or less, and test it instead of guessing from the clock.
When should I shock the pool?
NSW Health says to treat the pool after it is closed to swimmers for the day, and to run the circulation overnight.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.