A PHEV economy calculator works out the fuel economy of a plug-in hybrid from how you drive it. Enter the battery range, the electric consumption, the gasoline economy and your monthly trips, and it gives the MPGe, the miles on battery and on gasoline, and the monthly cost.
How to use the phev economy calculator
- Choose US or metric units.
- Enter the range, the electric consumption and the gasoline economy.
- Enter the short and long trips a month, and the prices.
- Press Calculate.
What MPGe means
MPGe is miles per gallon of gasoline equivalent. It measures how far a vehicle goes on the energy in a gallon of gasoline, which the Wikipedia article on MPGe puts at 33.7 kilowatt-hours [1]. The EPA's fuel economy site describes it as based on a quantity of fuel with the same energy content as a gallon of gasoline [3]. The MPGe of a plug-in hybrid depends on how its miles are split between battery and gasoline, so it needs your driving as an input.
The formula
The tool gives the MPGe as the total miles divided by the sum of two terms. This is our own derivation from the 33.7 figure, because 100 miles at X kilowatt-hours per 100 miles use X divided by 33.7 gallons of gasoline equivalent. One is the battery miles times the electric consumption in kilowatt-hours per 100 miles, divided by 3,370. The other is the gasoline miles divided by the gasoline mpg. The number 3,370 is 33.7 kilowatt-hours times 100, which turns kilowatt-hours per 100 miles into gallons per mile. The EPA explains that kilowatt-hours per 100 miles tells you how many kilowatt-hours the vehicle would use to travel 100 miles [3].
The trip split
The tool takes the miles on battery and on gasoline from two kinds of trip. The short trips are within the battery range and are driven entirely on battery. The long trips go beyond it and are driven entirely on gasoline. The battery miles are the short trip length times the short trips a month, and the gasoline miles the long trip length times the long trips. A plug-in hybrid really operates in charge-depleting and charge-sustaining modes [2], so this all-or-nothing split is our own simplification.
A worked example
Take a range of 25 miles, 25 kilowatt-hours per 100 miles and 54 mpg. Make 20 trips of 15 miles and 8 trips of 100 miles a month. The battery miles are 300 and the gasoline miles 800. The denominator is 300 times 25 over 3,370, which is 2.2255, plus 800 over 54, which is 14.8148. That is 17.0403. The total of 1,100 miles gives 64.55 MPGe. These are our own test values.
Costs
These cost formulas are our own working. The electricity is the battery miles times the consumption divided by 100, which is 75 kilowatt-hours, times your price. At 0.15 that is 11.25. The gasoline is 800 divided by 54, 14.81 gallons, times your price. At 3.50 it is 51.85. The total is 63.10 a month, or 0.0574 a mile.
Comparing with another car
If you enter the economy of a gasoline-only car, the calculator works out the gallons that it would burn for the same distance and what they cost. At 54 mpg, 1,100 miles use 20.37 gallons, which cost 71.30. The plug-in saves 8.19 a month at these prices. With a less efficient car, such as one at 30 mpg, the saving is larger.
Metric units
In metric mode, you enter the range in kilometres, the consumption in kilowatt-hours per 100 kilometres, the gasoline economy in litres per 100 kilometres and the price per litre. The calculator converts these to miles and gallons before it applies the formula, and it gives the answer as litres per 100 kilometres equivalent as well as MPGe. The costs are in your own currency.
What the method leaves out
The method has no blended driving, where a trip uses the battery first and then the engine, and it uses no utility factor, which represents the percentage of miles that will be driven using electricity by an average driver [2]. We did not model that standard method. So treat the MPGe as a measure for your own pattern of driving.
Real driving
Label ratings often assume that more of the miles are electric than people achieve, since it depends on the charging at home or at work, on trip lengths, on the weather and on the speed. Use your own real trips, from a trip log if you can. The range you enter should be the one that you get in practice, and not the brochure figure.
Using the calculator
Pick the units, enter the vehicle figures from its label or your own measurements, and enter your trips and prices. Try adding charging at work, which turns long trips into short ones, or reduce the number of long trips, and see how the MPGe and the cost change. You enter your own vehicle values.
Charging and trip length
The split of trips is the main driver of the result. If you can charge at work or at a shop, a longer trip can stay within the battery range, which moves its miles from gasoline to the battery. In the calculator you can model this by lowering the number of long trips and raising the number of short ones, then comparing the MPGe and the monthly cost.
Common mistakes
- Using a range that you never achieve. Enter your real battery range.
- Entering a long trip that is shorter than the range. It must be longer, or it counts as a short one.
- Mixing mpg with L/100 km. Match the units mode.
- Expecting a label figure. The result follows your own trips.
What next
Use this often? Add Phev Economy to your Home screen.
Frequently asked questions
What is a PHEV economy calculator?
A tool that works out the MPGe and cost of a plug-in hybrid from its battery range, consumption and your trips.
What is the MPGe formula for a plug-in hybrid?
Total miles divided by battery miles times kWh per 100 miles over 3,370, plus gasoline miles over mpg.
Why is 3,370 used?
It is 33.7 kWh per gallon, times 100.
Does the PHEV economy calculator use a utility factor?
No. Each trip counts as all battery or all gasoline.
Can I use kilometres and litres?
Yes. Choose metric, and the values are converted before the formula is used.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.