What this PDF booklet maker does
This PDF booklet maker arranges the pages of your PDF so that, printed double-sided and folded, they read as a booklet.
A folded booklet is made from sheets of paper printed on both sides, stacked and folded in half. For the pages to read in order after folding, they cannot be printed in order. Page 1 must sit beside the last page, page 2 beside the second to last, and so on. Putting pages in the right places on a printer’s sheet is called imposition. [1]
This PDF booklet maker does that arrangement for you. It builds a new PDF in which every sheet side holds two of your pages, so printing it double-sided and folding the stack gives a booklet. [2]
How to make a booklet from a PDF
- Choose your PDF.
- Pick the sheet size. “Two pages of the original size” keeps your page size and makes each sheet twice as wide. A4 or US Letter landscape fits the pages to those sheets.
- Tick “Right-bound book” only for languages read from right to left.
- Press Make booklet and download the PDF.
- Print double-sided, flipping on the short edge, then fold and staple.
How the page order works
The number of pages is rounded up to a multiple of four, because each sheet holds four pages: two on the front and two on the back. If your PDF has 5 pages, three blank pages are added at the end to make 8. The pairs for 8 pages are written below, with the pages numbered from 1.
| Sheet | Front (left | right) | Back (left | right) |
|---|---|---|
| 1 | 8 | 1 | 2 | 7 |
| 2 | 6 | 3 | 4 | 5 |
The general rule is our own working, checked against the Wikipedia description of imposition: on sheet k of n pages the front is the last unused page and the first unused page, and the back is the two pages between them. [1] The tool applies this to any page count.
Printing and folding
- Print double-sided, “flip on short edge”. This is the setting for landscape sheets.
- Use actual size, with no scaling.
- Fold the whole stack of sheets in half together, with page 1 on the outside.
- Staple along the fold with a long-arm stapler or sew it, which is what saddle stitching means.
- Up to about 16 sheets (64 pages) fold well in ordinary paper. Thicker books may need a creep allowance, which this tool does not add.
Sheet sizes
A4 paper is 210 × 297 mm. [3] Turned sideways, an A4 sheet holds two A5 pages side by side. If your original pages are A5, choose “Two pages of the original size”. If they are A4, the booklet pages are shrunk to fit half a sheet, which is about 70 percent of the original size.
Tips
- Make the page count a multiple of four yourself if you want control over which pages are blank.
- Check a test copy with a few pages first, to be sure your printer’s duplex setting is right.
- Leave margins in your original, since folding and stapling take a little space at the centre.
- If the booklet reads backwards, choose the other binding option and make it again.
A worked example
Suppose your PDF has 10 A5 pages and you want a stapled booklet. The tool pads it to 12 pages, adding two blank pages at the end. That makes three sheets and six printed sides. Sheet 1 front is pages 12 and 1, and its back is pages 2 and 11. Sheet 2 front is 10 and 3, back is 4 and 9. Sheet 3 front is 8 and 5, back is 6 and 7. Print the six sides double-sided, stack the sheets in order, fold them together and staple the fold. Page 1 is the cover and pages 11 and 12 are the blank back pages. [1]
If you do not want the blanks at the very end, add the blank or notes pages to your PDF yourself so that its count is a multiple of four, and each blank sits where you want it.
Common mistakes
- Printing single-sided. The booklet needs both sides of each sheet.
- Flipping on the long edge. For landscape sheets choose the short edge, or the back will be upside down.
- Scaling the print. Use actual size, or the pages will not fit the sheet.
- Not leaving room at the fold. Content too close to the inner edge can disappear into the staples.
- Folding the sheets one by one and stacking them. Fold the whole stack together so the pages stay in order.
Larger booklets and creep
When many sheets are folded together, the middle pages stick out a little beyond the outer ones. Printers call this creep, and trim it off after folding. For small booklets of up to about 16 sheets it is minor. This tool does not shift the pages to allow for creep, so keep important text well away from the outer edge. [1]
Other sizes
A US Letter sheet turned sideways is 11 × 8.5 inches and holds two half-letter pages. The A4 option holds two A5 pages. [3] If you choose the original size, each sheet is twice as wide as one page. That works for any paper your printer can take, but check that the sheet fits.
For a quick check, print one sheet front and back and fold it to see that the page order and direction are right.
Privacy
The file is read and rewritten in your browser. Nothing is uploaded.
What next
Use this often? Add PDF Booklet to your Home screen.
Frequently asked questions
How do I use a PDF booklet maker?
Choose the PDF, pick a sheet size and press Make booklet. Print the new PDF double-sided, flipping on the short edge, then fold the stack in half and staple.
Why does it add blank pages?
Each sheet holds four pages, so the page count must be a multiple of four. Blank pages are added at the end to fill the last sheet.
What is saddle stitch order?
It is the page order on a stack of folded sheets: page 1 sits beside the last page, page 2 beside the second to last, and so on, so the pages read in order after folding.
Which duplex setting should I use?
Choose double-sided printing with the flip on the short edge, because the sheets are landscape.
Is my PDF uploaded?
No. The booklet is built in your browser.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.