Saved

Press the star next to a tool's name to save it.

All my tools

Particles Velocity Calculator

Use this particles velocity calculator for the mean, root-mean-square and most probable speeds of a gas particle, or the speed of a charged particle in a voltage.

Restored your last values ·

u
K
u
e
V

For a gas, enter the mass of one particle in atomic mass units and the temperature in kelvin to get the mean, root-mean-square and most probable speeds. For a charged particle, enter its mass, its charge and the voltage it falls through to get its speed.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the kind of particle, fill in the boxes, then press Calculate.

See full result

This particles velocity calculator finds how fast a particle moves. For a gas particle it gives the mean, root-mean-square and most probable speeds from the mass and the temperature. For a charged particle accelerated through a voltage it gives the speed, both with the classical formula and with relativity.

How to use the particles velocity calculator

  1. Choose a gas particle or a charged particle.
  2. For a gas, enter the mass in atomic mass units and the temperature in kelvin.
  3. For a charged particle, enter the mass, the charge in elementary charges and the voltage.
  4. Press Calculate.

Particles in a gas

The particles of a gas do not all move at the same speed. Their speeds follow the Maxwell–Boltzmann distribution, which depends on the mass of one particle and on the temperature of the gas [1]. This calculator takes just those two inputs, a mass and a temperature, and returns the mean speed. It adds two other speeds that physicists use, so you can compare them.

The mean speed

The mean speed is the square root of 8 k T divided by π m, where k is the Boltzmann constant, T the temperature and m the mass of one particle [1]. The Wikipedia article on the Maxwell–Boltzmann distribution writes the same mean speed in terms of the gas constant and the molar mass [1]. Heavier particles are slower and hotter gases are faster, with the speed rising with the square root of the temperature.

Root-mean-square and most probable speeds

Two other typical speeds are described in the Wikipedia article [1]. The most probable speed is the square root of 2 k T over m. The root-mean-square speed is the square root of 3 k T over m. They always come out in the same order: the most probable speed is the smallest, the mean is in the middle and the root-mean-square speed is the largest. The tool shows all three together.

Constants used

The tool uses the exact value of the Boltzmann constant, 1.380649 × 10⁻²³ joules per kelvin, which the SI revision of 2019 fixed [2]. The mass of one particle comes from the atomic mass unit, the dalton, which is 1.66053906892 × 10⁻²⁷ kilograms in the 2022 recommended values [3]. Using a rounded value of the constants instead would change the results in the fifth digit.

A worked example for nitrogen

Take a particle of 28 u, close to the nitrogen molecule, at 300 kelvin. This is our own example, not one from the pages. The mean speed is about 476.29 metres per second, the root-mean-square speed is about 516.96 metres per second and the most probable speed is about 422.1 metres per second. The mean speed is about 1,714 kilometres per hour.

Charged particles in a field

The second mode answers a different question: how fast does a charged particle go after it falls through a voltage? The work done by the field is the charge times the voltage, qV, and the classical formula sets it equal to half the mass times the speed squared. The speed is then the square root of 2 q V divided by m. This is our own working from the standard work-energy relation, and not from the pages above.

When relativity matters

At high energy the classical speed becomes too large, and can even pass the speed of light. The tool therefore also gives the relativistic speed. The energy gained, qV, adds to the rest energy, so the Lorentz factor is γ = 1 + qV divided by m c², and the speed is c times the square root of 1 minus 1 over γ squared. This is again our own working from the standard definitions. The speed of light is exactly 299,792,458 metres per second [2].

A relativistic example

Give the tool a mass of 0.000548579909 u and a charge of 1 e, which are the figures for an electron that you type in yourself, and a voltage of one million volts. The classical formula gives about 593,100,000 metres per second, which is impossible. The relativistic formula gives about 282,130,000 metres per second, or 94.1 percent of the speed of light, with γ equal to 2.956951.

How to read the results

For a gas, quote the mean speed when you want the typical speed, the root-mean-square speed when you need the kinetic energy, since the average kinetic energy is three halves of k T, and the most probable speed when you want the peak of the distribution. For a field, trust the classical value only when it is a small fraction of the speed of light. The tool tells you when the two differ by more than one percent.

Limits

The gas formulas are for an ideal gas in thermal equilibrium, so they are less accurate for dense gases or very low temperatures. The field formulas assume that the particle starts at rest, travels in a vacuum and radiates no energy. They also ignore any magnetic field. Real accelerators have all of these effects, so use this calculator for estimates and teaching, and check any design with proper software.

Common mistakes

  • Using atomic mass units as the mass. Enter the mass of one particle in u, not of a mole in grams.
  • Entering Celsius. The gas mode needs kelvin; add 273.15 to a Celsius figure.
  • Trusting the classical speed near the speed of light. Use the relativistic value.
  • Mixing the three gas speeds. The mean, the root-mean-square and the most probable speeds are different numbers.

What next

Use this often? Add Particles Ve to your Home screen.

Frequently asked questions

What is a particles velocity calculator?

A tool that gives the speed of a gas particle from its mass and temperature, or of a charged particle that has fallen through a voltage.

What is the mean speed of a gas particle?

The square root of 8 k T divided by π m, where k is the Boltzmann constant, T the temperature and m the mass of one particle.

Why are there three different gas speeds?

The speeds follow a distribution, so the most probable speed, the mean and the root-mean-square speed differ, in that order of size.

How is the speed of a charged particle found?

Classically from the square root of 2 q V over m, and with relativity from the Lorentz factor, which is needed at high energy.

Can the speed exceed the speed of light?

No. The classical formula can give such a value at high voltage, which is why the relativistic result is shown.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools