Saved

Press the star next to a tool's name to save it.

All my tools

Nernst Equation Calculator

Use this Nernst equation calculator to find the potential of a cell from E°, n, Q and temperature, build E°cell from standard electrode potentials, and find ΔG° and the equilibrium constant.

Restored your last values ·

Choose a job. Enter the standard potential, the number of electrons, the reaction quotient and the temperature to get the cell potential. Or pick two half-cells to get the standard cell potential, or enter E° to get the Gibbs energy and the equilibrium constant.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want and fill in the boxes, then press Calculate.

See full result

The Nernst equation calculator gives the potential of an electrochemical cell under non-standard conditions from the standard potential, the number of electrons, the reaction quotient and the temperature. It also builds a standard cell potential from two half-cells chosen from a table of standard electrode potentials, and finds the Gibbs energy and the equilibrium constant from it. Choose a job and enter your numbers.

How to use the Nernst equation calculator

  1. Choose what you want.
  2. For a cell potential, enter E°, n, Q and the temperature. For a standard potential, pick the cathode and anode.
  3. Press Calculate.

The equation

The Nernst equation is E = E° − (RT/zF) ln Q, where z is the number of electrons transferred, R is the gas constant, T is the temperature in kelvins, F is the Faraday constant and Q is the reaction quotient [1]. The page gives R as 8.31446261815324 J/(K mol) and F as 96485.3321233100184 C/mol [1]. At 25 °C the combination RT/F is about 25.693 mV, and the version with base 10 logarithms has a coefficient of 0.05916 volts divided by z [1].

Standard cell potential

The standard potential of a cell is the standard potential of the cathode minus that of the anode, E°cell = E°cathode − E°anode [2]. The tables list reduction potentials against the hydrogen electrode at 25 °C: Li⁺/Li −3.0401 V, Na⁺/Na −2.71, Mg²⁺/Mg −2.372, Al³⁺/Al −1.662, Zn²⁺/Zn −0.7618, Fe²⁺/Fe −0.44, H⁺/H₂ 0 by convention, Cu²⁺/Cu 0.337 [4], and F₂/F⁻ +2.87 [2]. For zinc and copper, 0.337 − (−0.7618) is 1.0988 volts.

Worked example

Take the zinc and copper cell with E° = 1.10 V and n = 2. When the reaction quotient, the zinc ion concentration over the copper ion concentration, is 0.1 at 25 °C, E = 1.10 − (0.05916/2) × log₁₀ 0.1, which is 1.1296 V. The potential rises when Q is below 1 and falls when Q is above 1. When Q equals 1 the potential equals the standard value. The example is our own calculation.

Gibbs energy

The Gibbs energy change of the cell reaction is ΔG = −zFE [1], and the standard value is ΔG° = −nFE°cell [2]. For E° = 1.0988 V and n = 2, ΔG° is −212.0 kJ per mole of reaction. A positive cell potential means a negative Gibbs energy, so the reaction can proceed spontaneously. The calculator prints the value in kilojoules.

Equilibrium constant

At equilibrium the cell potential is zero and Q equals K, so the Nernst equation gives E° = (RT/nF) ln K, or K = e to the power nFE° divided by RT. This rearrangement is our own working. For the zinc-copper cell, K is about 10³⁷, which shows how far the reaction goes. The relation ΔG° = −RT ln K connects it to the Gibbs energy.

Choosing the reaction quotient

Q has the same form as the equilibrium constant but uses the present concentrations or activities, with the products on top. For the cell Zn + Cu²⁺ → Zn²⁺ + Cu, Q is [Zn²⁺] divided by [Cu²⁺], since solids are left out. For a half-reaction the page writes Q as the activity of the reduced form over that of the oxidized form [1], so take care to match the form to the reaction you wrote.

Limits

The potentials in the list are for standard conditions, and the page that we read gives them for a limited set of couples. For others, choose the custom option and type the potential. Concentrated solutions and complex ions need activities, not concentrations, for accurate answers.

Reading a cell potential

The electromotive force of a cell is the maximum potential difference between its two electrodes when no current flows [3]. A positive value means that the cell reaction goes forward as written, and the voltmeter reading of a real cell is a little below it once current flows, because of internal resistance. The Nernst equation tells you how this open-circuit value changes as the concentrations change, and it is why a battery's voltage falls as its reactants are used up.

Concentration cells and the pH electrode

When both half-cells use the same couple at different concentrations, E° is zero and the whole potential comes from the Nernst term, which is the basis of concentration cells. The glass pH electrode works on the same principle, with about 59 millivolts per pH unit at 25 °C, consistent with the 0.05916 volt coefficient. A tenfold change in Q shifts the potential by 0.05916 divided by n volts, a rule that gives a fast check of any answer.

Temperature

The calculator uses the temperature in kelvins, so 25 °C becomes 298.15 K. At 37 °C the coefficient grows to about 0.0615 volts, a small but real difference when you work with biological cells.

A quick worked check

For a cell with n = 1 and Q = 100, the potential falls by 0.05916 × 2 = 0.1183 volts below E° at 25 °C, since log₁₀ 100 is 2. For n = 2 the fall is half as large. Use this kind of mental check to confirm the calculator's output, and remember that the sign of the correction depends on whether Q is above or below 1.

Common mistakes

  • Swapping the cathode and the anode. The cathode is where reduction happens.
  • Using the wrong n. n is the number of electrons in the balanced equation.
  • Putting reactants over products in Q. Products go on top.
  • Using Celsius in the formula. The calculator converts to kelvins.

What next

Use this often? Add Nernst Equat to your Home screen.

Frequently asked questions

What is a Nernst equation calculator?

A tool that uses E = E° − (RT/nF) ln Q to find a cell potential under non-standard conditions, and standard cell potentials from half-cells.

What is the Nernst equation at 25 °C?

E = E° − (0.05916 ÷ n) × log₁₀ Q, with E and E° in volts.

How do I calculate the standard cell potential?

Subtract the standard potential of the anode from that of the cathode. Copper (0.337) and zinc (−0.7618) give 1.0988 V.

How is cell potential related to Gibbs energy?

ΔG = −nFE. A positive cell potential gives a negative ΔG.

What does Q mean?

The reaction quotient, with products over reactants at the present concentrations. At equilibrium Q equals K and E is zero.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools