A lattice energy calculator estimates the energy released when gaseous ions come together to form an ionic crystal, using the Born-Landé equation. Enter the Madelung constant of the structure, the charges of the ions, the distance between the nearest ions and the Born exponent, and it gives the lattice energy in kilojoules per mole.
How to use the lattice energy calculator
- Enter the Madelung constant of the crystal structure.
- Enter the charge numbers of the cation and the anion as positive numbers.
- Enter the nearest-neighbour distance in ångström and the Born exponent.
- Press Calculate.
The equation
The Born-Landé equation gives the lattice energy as U = −(N_A × M × z⁺ × z⁻ × e²) divided by (4π ε₀ r₀), times (1 − 1/n) [2]. Here N_A is the Avogadro constant, M is the Madelung constant, which is related to the geometry of the crystal, z⁺ and z⁻ are the charge numbers of the ions, e is the elementary charge, ε₀ is the permittivity of free space, r₀ is the distance to the closest ion and n is the Born exponent [2]. The page uses N_A = 6.0221 × 10²³ per mole, e = 1.6022 × 10⁻¹⁹ coulombs and 4π ε₀ = 1.112 × 10⁻¹⁰ C²/(J m) [2], and the calculator uses the same values.
The Born exponent
The exponent n describes how strongly the ions repel each other at short range. The page says it is typically a number between 5 and 12 and is obtained from the compressibility or from theory [2]. It tabulates approximate experimental values for ions with the electron configuration of a noble gas: 5 for helium, 7 for neon, 9 for argon and for copper(I), 10 for krypton and silver(I), and 12 for xenon and gold(I) [2]. For a compound the usual practice is to average the values of its two ions, so sodium chloride, with sodium like neon (7) and chloride like argon (9), is taken as 8, which is the default here. That rule is our own working.
The Madelung constant
The Madelung constant depends only on the geometry of the crystal. The pages that we read give no table of values, and they say that barium oxide has the sodium chloride structure and therefore the same Madelung constant [2]. For the sodium chloride structure the value is about 1.7476, a standard figure that we use here without a source on those pages, so check it in a text. Other structures, such as caesium chloride and zinc blende, have other values.
Worked example
For sodium chloride, take M = 1.7476, z⁺ = z⁻ = 1, n = 8 and r₀ = 2.82 ångström. The result is a lattice energy of about −754 kJ/mol. The page lists a bond radius of 283 pm for sodium chloride, and a calculated lattice energy of −756 kJ/mol against an experimental −787 kJ/mol [2]. A value of n = 9 changes the result to −766 kJ/mol. Doubling both charges, as in magnesium oxide, multiplies the energy by four for the same distance. This example is our own calculation.
Sign convention
The page notes that the lattice energy is quoted as negative, for the energy released when the crystal forms from gaseous ions, or as positive, for the energy needed to break it up, depending on the convention [1]. The calculator gives a negative number for the energy released. The page lists experimental values of −786 for sodium chloride, −657 for caesium chloride, −1030 for lithium fluoride, −3054 for barium oxide and −3795 for magnesium oxide, in kJ/mol [1].
Other equations
The page also gives the Born-Mayer equation, which replaces the factor (1 − 1/n) by (1 − ρ/r₀) with ρ of about 30 to 34.5 pm for alkali halides, and the Kapustinskii equation, which estimates the energy from the number of ions in the formula unit and the ionic radii, with a constant of 1.202 × 10⁵ kJ Å/mol [1]. These are not included in this calculator.
What the number tells you
A larger lattice energy means a more tightly bound crystal, which usually means a higher melting point and a lower solubility. The energy rises with the charges of the ions and falls as they get larger, since r₀ is in the denominator. That is why magnesium oxide, with two doubly charged ions, has a far higher lattice energy than sodium chloride.
Comparing compounds
The equation makes trends easy to see. Because the charges are multiplied, a compound of 2+ and 2− ions has four times the charge product of a compound of 1+ and 1− ions, and the distance in the denominator means that larger ions, which sit farther apart, give a smaller energy. Try lithium fluoride and caesium iodide with the same charges and you will see the smaller pair give the larger number. Use the calculator to test such comparisons before you look up measured values.
Where the estimate stops being reliable
The model treats ions as hard charged spheres. It works best for simple halides and oxides of the alkali and alkaline earth metals, and it does less well where bonding has a strong covalent part. Compare the result with a value from a Born-Haber cycle when you need accuracy, and treat the equation as a guide to size and trend.
Common mistakes
- Using the radius of one ion. r₀ is the distance between the centres of a cation and an anion.
- Entering charges with signs. Use positive numbers for both.
- Mixing units of distance. Enter ångström, which is 0.1 nm.
- Comparing with a different sign convention. Check whether a source gives positive or negative values.
What next
Use this often? Add Lattice Ener to your Home screen.
Frequently asked questions
What is a lattice energy calculator?
A tool that estimates the energy released when ions form an ionic crystal, using the Born-Landé equation.
What is the Born-Landé equation?
U = −(N_A M z⁺ z⁻ e²) ÷ (4π ε₀ r₀) × (1 − 1/n), where M is the Madelung constant and n the Born exponent.
What is the lattice energy of sodium chloride?
The page lists about −786 kJ/mol experimentally. The equation with M = 1.7476, r₀ = 2.82 Å and n = 8 gives about −754.
What is the Born exponent?
A number between 5 and 12 that describes short-range repulsion between ions. For a compound it is usually averaged over its two ions.
Why is lattice energy negative?
It is the energy released when gaseous ions form the crystal. Some sources use the opposite sign.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.