An involute function calculator finds inv(α) = tan α − α, the function used in the geometry of involute gear teeth, finds the angle α that belongs to a given inv value, and gives points on the involute of a circle. Choose the job, enter the numbers and press the button. The curve follows the Wikipedia page on the involute, and the involute function is derived from its equations. The work is done in your browser.
How to use the involute function calculator
- Choose what you want: inv(α), the angle from an inv value, or a point on the involute.
- Choose degrees or radians.
- Enter the angle α, the inv value, or the base radius and the unrolling angle t.
- Press Calculate.
The involute of a circle
An involute is the curve traced by the end of a taut string as it is unwound from a curve. The Wikipedia page gives the involute of a circle of radius r, starting at the point (r, 0), as X = r(cos t + t sin t) and Y = r(sin t − t cos t), where t is the angle by which the string has been unwound. The length of the free string is r times t, and the length of the curve from its start is r t²/2. For r = 1 and t = 1 radian, the point is at (1.38177, 0.30117), its distance from the center is the square root of 2, and the string is 1 long.
Deriving the involute function
The distance of the point from the center is R = r times the square root of 1 + t². The string is tangent to the circle, so the angle α between the string and the radius to the point satisfies tan α = t, and cos α = r/R. The polar angle of the point, measured from the start of the curve, is the angle from the x-axis to the point, which is t minus the arctangent of t. Writing t as tan α, this angle is tan α − α. This is the involute function, inv(α) = tan α − α, with α in radians. For t = 1, α is 45°, and inv(45°) is 1 − 0.785398, which is 0.214602 radians, or 12.2956 degrees. You can check that this matches the polar angle of the point (1.38177, 0.30117).
Values of the involute function
For α = 20°, which is 0.349066 radians, tan α is 0.36397 and inv(α) is 0.014904 radians, or 0.85 degrees. The function is zero at α = 0, increases quickly, and grows without bound as α approaches 90°. The calculator gives inv(α) in radians and degrees, together with tan α and cos α, the ratio of the base radius to the radius of the point.
Finding the angle from the involute value
The inverse problem, finding α from a given inv(α), has no simple formula. The calculator solves the equation tan α − α = v with Newton's method, which converges in a few steps. For v = 0.014904 it returns 20°. Enter the value in radians or in degrees. The result is the angle α in the unit you chose. This is the calculation that is needed when the radius at which a gear tooth has a given thickness is found from the angle.
Using the involute function
The involute curve of a circle is the shape used for gear teeth, and the involute function appears in the calculations of the thickness of a tooth at a given radius. This calculator gives the underlying geometry only. For the design of a specific gear, you should follow the standard that applies to it, since it will prescribe the angles, modules and tolerances.
A worked example of a point
Take a base circle of radius 10 and an unrolling angle of 0.5 radians. The point on the involute is at x = 10(cos 0.5 + 0.5 sin 0.5), which is 11.1730, and y = 10(sin 0.5 − 0.5 cos 0.5), which is 0.40634. Its distance from the center is 10 times the square root of 1.25, which is 11.1803. The angle α is the arctangent of 0.5, which is 26.565°, and the polar angle of the point is 2.0828°, which equals inv(26.565°), since tan α − α is 0.5 − 0.463648, or 0.036352 radians. The length of the unrolled string is r t, which is 5, and the length of the curve from its start is r t²/2, which is 1.25.
How the three modes fit together
The three modes of the calculator are different views of one fact. The point mode follows the string, the involute function mode gives the polar angle of the point from the angle α between the string and the radius, and the inverse mode finds that angle when the polar angle is known. Working through one example in all three modes is a good way to see that they agree.
Typing tips
Choose degrees or radians before you type an angle. The angle α for the first mode must be at least 0 and less than 90°. In the point mode, the unrolling angle t can be larger than 90°, since the string can be unwound through several turns, and the point moves farther from the circle each time.
Common mistakes
- Using degrees in the formula. inv(α) = tan α − α needs α in radians.
- Taking α as 90°. tan 90° is not defined.
- Confusing α and t. t is the unrolling angle, and α = arctan t.
- Reading inv as an inverse function. It is a separate function with that name.
- Forgetting the base radius. The curve scales with r.
What next
Use this often? Add Involute Fun to your Home screen.
Frequently asked questions
What is an involute function calculator?
A tool that evaluates inv(α) = tan α − α, finds α from an inv value, and gives points on the involute of a circle.
What is the involute function?
inv(α) = tan α − α, with α in radians. For α = 20°, inv(α) ≈ 0.014904 rad.
What are the equations of the involute of a circle?
x = r(cos t + t sin t) and y = r(sin t − t cos t), where t is the unrolling angle.
How do you find α from inv(α)?
Solve tan α − α = inv(α) numerically, for example with Newton's method. For 0.014904 the angle is 20°.
Why is the involute used for gears?
Involute teeth roll against each other with a constant speed ratio, even if the center distance changes slightly.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.