Saved

Press the star next to a tool's name to save it.

All my tools

Inches to Fraction Converter

Use this inches to fraction converter to turn decimal inches or millimetres into the nearest fraction of an inch, from 1/2 to 1/128, or a fraction into a decimal.

Restored your last values ·

Choose what you want to convert. Enter a decimal in inches or a length in millimetres and pick the finest fraction your tape measure shows, or enter a whole number, a numerator and a denominator to get the decimal.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want and enter the measurement, then press Convert.

See full result

An inches to fraction converter turns a decimal measurement in inches, or a length in millimetres, into the nearest fraction of an inch that your tape measure shows. Choose the finest division, from one half to one 128th, enter the number and it gives the reduced fraction and the error.

How to use the inches to fraction converter

  1. Choose what you want.
  2. Pick the finest fraction your tape shows.
  3. Enter the measurement.
  4. Press Convert.

The exact inch

The inch is defined as exactly 2.54 centimetres, which is 25.4 millimetres [1]. The US notice that fixed the yard at exactly 0.9144 metre took effect on 1 July 1959, replacing the 1893 value of 3600/3937 metre [4]. Before the international agreement the American and British inches differed slightly, at 25.4000508 and 25.399977 millimetres, and the 25.4 millimetre inch was adopted by the British Standards Institution in 1930 and the American Standards Association in 1933 [5]. The calculator uses 25.4 for the conversion to and from millimetres.

How inches are divided

Inch measurements are written with dyadic fractions, in which the denominator is a power of two, such as 1/8 = 1/2³ [2]. The inch subdivisions are typically written using dyadic fractions with odd numerators, so 2 3/8 is the correct form and not 2 6/16 or 2.375 [5]. The calculator reduces every fraction to its lowest terms in this way.

How the rounding works

For a decimal x, the calculator multiplies the fractional part by the denominator you chose, rounds to the nearest whole number and divides back, then reduces the result. For 0.4 inch at the nearest 1/16, the fraction is 6/16, which reduces to 3/8, or 0.375 inch, a difference of 0.025 inch. For 0.3 inch at 1/64 it is 19/64. These are our own calculations.

Worked examples

A decimal of 2.375 inches is exactly 2 3/8 inches. A decimal of 0.5 is 1/2. Ten millimetres is 0.3937 inch, which at the nearest 1/64 is 25/64 inch, a difference of about 0.1 millimetre. A length of 25.4 millimetres is one inch. In the other direction, 2 3/8 inches is 2.375 inches, which is 60.325 millimetres.

Choosing the denominator

Pick the finest mark your tape measure or ruler shows. A common tape has marks every 1/16 inch, and rulers for woodwork may show 1/32. Machinists and drafters may work to 1/64 or 1/128. The finer the denominator, the smaller the error, but a very fine fraction is hard to read on a tape. If the result seems fussy, try a coarser division.

Why fractions are used

Many US tapes also carry special marks, every 16 inches for stud spacing and every 19.2 inches for joist spacing [3]. In building and woodwork, fractions of an inch are the working language, because tape measures are marked that way and because halving is an easy operation on a board. Decimal inches are used in machining and engineering drawings.

Using the converter

Use it to turn a measurement from a plan or a calculator into something you can mark on a board, and to turn a tape reading into a decimal for a spreadsheet. The conversion mode from a fraction lets you check a reading, for example to compare 5/16 with a drill bit given in decimals.

Reading a tape measure

On a standard tape the longest line between the inch marks is the half, the next longest the quarters, then eighths, sixteenths and in some tapes thirty-seconds. Each smaller mark halves the one before. To read a fraction, count the marks past the last whole inch and name them by the smallest division. The converter does the same thing in reverse: it tells you how many of the smallest marks to count.

The common fractions

It is useful to remember a few decimals. One eighth is 0.125, one quarter 0.25, three eighths 0.375, one half 0.5, five eighths 0.625, three quarters 0.75 and seven eighths 0.875. The sixteenths are the odd multiples of 0.0625, so 5/16 is 0.3125 and 7/16 is 0.4375. All of them are exact decimals, because the denominators are powers of two.

Rounding and tolerance

A decimal that is not exactly on a mark has to be rounded, and the working line shows by how much. For woodwork, an error of a thirty-second of an inch is often acceptable, while for machined parts it is not. Choose the denominator to match the tolerance that you need, and if the error is bigger than your tolerance, use a finer division or switch to decimals.

Working with millimetres

If your plan is in millimetres, the second mode gives the nearest inch fraction to each length. Because 25.4 millimetres is exactly one inch, converting back and forth does not lose any precision other than the rounding you chose. A common check is that 25 millimetres is just under an inch, at 63/64 inch to the nearest sixty-fourth.

Practice conversions

Try 0.1875, which is exactly 3/16, and 0.3333, which at the nearest sixty-fourth is 21/64 with a small error. Try 12.7 millimetres, which is exactly half an inch, and 6.35 millimetres, which is a quarter of an inch.

Common mistakes

  • Leaving fractions unreduced. The tape shows 3/8, not 6/16.
  • Choosing a denominator that your tape lacks. Match it to the marks you can read.
  • Mixing mm and inches. Pick the right mode.
  • Rounding twice. Convert once, from the original number.

What next

Use this often? Add Inches to Fr to your Home screen.

Frequently asked questions

What is an inches to fraction converter?

A tool that turns a decimal measurement in inches into the nearest fraction of an inch on a tape measure.

How many millimetres are in an inch?

Exactly 25.4.

How do I convert 0.375 inch to a fraction?

3/8 inch. Multiply by the denominator, 0.375 × 8 = 3, and write 3/8.

Which denominator should I use?

The finest mark your tape shows, usually 1/16 or 1/32.

Why are fractions reduced?

Inch fractions are written in lowest terms with odd numerators, such as 3/8 and not 6/16.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Finance Tools