An impulse and momentum calculator finds the momentum of a moving object and the impulse needed to change it. Enter a mass and the velocities before and after to get the impulse, or enter a constant force and the time it acts. With a time you also get the average force.
How to use the impulse and momentum calculator
- Choose what you know: the mass and velocities, or the force and time.
- Fill in the boxes, in kilograms, metres per second, newtons and seconds.
- Press Calculate.
Momentum
The momentum of an object is its mass times its velocity, p = m · v [1]. A 0.16 kilogram ball moving at 2.5 metres per second has a momentum of 0.4 kilogram metres per second. Momentum is a vector, so it has a direction as well as a size. The calculator treats one direction as positive, and a velocity in the opposite direction is entered as a negative number, which gives a negative momentum.
Impulse
Impulse is the change in momentum. It is written J = Δp = p₂ − p₁ = m · v₂ − m · v₁ = m · Δv [1]. Its unit is the newton second, which is the same as a kilogram metre per second in SI units [1]. The result is positive when the momentum grows in the positive direction and negative when it falls or points the other way.
Impulse from a force
When a constant force F acts for a time Δt, the impulse it delivers is J = F · Δt [2]. Integrating a force that changes over time gives the same impulse, and the equality of this impulse and the change in momentum is called the impulse–momentum theorem [2]. The calculator uses the constant force form, so for a force that changes, enter the average force.
A worked example
As an example, take a ball of mass 160 grams that moves at 2.5 metres per second and is brought to a stop. In kilograms the mass is 0.16, and the final velocity is zero, so J = 0.16 × (0 − 2.5) = −0.4 newton seconds. The minus sign shows that the impulse acts against the original motion. Enter 0.16, 2.5 and 0 in the first mode to reproduce this.
Convert the mass first
The formula needs the mass in kilograms, and the ball above is 160 grams. If you put 160 into a formula that expects kilograms, the answer is a thousand times too large. The calculator therefore asks for kilograms. To use grams, divide by 1,000 before you enter the number.
Average force
Because J = F · Δt, the average force during a collision is J ÷ Δt. This rearrangement is our own working, not a separate formula. If the ball above is stopped in 0.02 seconds, the average force is −0.4 ÷ 0.02 = −20 newtons. Stopping the same ball in 0.2 seconds needs only 2 newtons, which is why a catcher's glove moves back with the ball.
Force and time mode
In the second mode you give a force and a time. A force of 50 newtons for 0.02 seconds gives an impulse of 1 newton second. If you add a mass of 2 kilograms, the velocity changes by J ÷ m = 0.5 metres per second, and with an initial velocity of 1 metre per second the final velocity is 1.5. This is the impulse–momentum theorem used in the other direction.
Direction and signs
Choose which direction is positive before you enter any numbers, and keep to it. A ball that hits a wall at 3 metres per second and bounces back at 2 has v₁ = 3 and v₂ = −2, so the change in velocity is −5, not −1. Forgetting the sign change is the most common error in bounce problems. The calculator uses your signs as typed.
What the formula leaves out
Using J = F · Δt requires the force to be constant, or to be replaced by its average over the time. The calculator does not cover collisions between two bodies, in which the momentum of the system is conserved [1]. For that, add up the momenta of all the bodies before and after.
Using the results
Impulse tells you how much push, over how much time, is needed to change the motion of an object. Use it to compare stopping distances and times for safety padding, to size the force that a bat gives a ball, or just to check a homework answer. The momentum values shown with each result let you check that the totals before and after make sense.
Why impulse matters in everyday life
Impulse explains why padding, crumple zones and bending your knees on landing reduce harm. The change in momentum is fixed by the mass and the velocities, so the only way to lower the force is to spread it over a longer time. This is our own reading of J = F · Δt [2]. Try the same ball with stopping times of 0.01, 0.1 and 1 second and compare the average forces that the calculator shows.
Momentum of several objects
The calculator treats one object. When two objects collide, work out the momentum of each before and after, with signs, and add them up. If nothing else pushes on the pair, the total stays the same, so the impulse on one object is equal and opposite to the impulse on the other. This conservation rule is a useful check on your own results [1].
Common mistakes
- Entering grams or pounds as kilograms. Convert the mass first.
- Dropping the minus sign of a reversed velocity. A bounce changes the sign.
- Treating a changing force as constant. Use its average.
- Confusing impulse with momentum. Impulse is the change in momentum.
What next
Use this often? Add Impulse and to your Home screen.
Frequently asked questions
What is an impulse and momentum calculator?
A tool that finds momentum, the impulse that changes it and the average force over a time.
What is the formula for impulse?
J = F · Δt for a constant force, and J = Δp = m · Δv, the change in momentum.
What is the unit of impulse?
The newton second, which equals a kilogram metre per second.
Why is impulse negative?
The impulse points opposite to the direction you chose as positive, as when a moving ball is stopped.
How do I find the average force from the impulse?
Divide the impulse by the time over which it acts.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.