Saved

Press the star next to a tool's name to save it.

All my tools

IBU Calculator

Use this IBU calculator to estimate the bitterness of a beer in International Bitterness Units. Enter your batch size, boil gravity and up to three hop additions, and the Tinseth formula returns the IBU from each addition and in total.

Restored your last values ·

%
min
%
min
%
min

Enter the finished batch volume and the gravity of the wort while it boils. For each hop addition enter the weight, its alpha acid percentage from the bag and the minutes it boils. Leave the second and third addition blank if you do not use them.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the batch size, the boil gravity and at least one hop addition, then press Calculate.

See full result

An IBU calculator turns the hops in your recipe into a single bitterness number. IBU stands for International Bitterness Units, a scale that approximately quantifies the bitterness of beer [2]. This page estimates it with the Tinseth formula, a model many brewing programs use. You enter the batch volume, the gravity of the boiling wort and up to three hop additions, and it shows the IBU each addition adds and the total.

How to use this IBU calculator

  1. Choose US (gallons and ounces) or Metric (litres and grams).
  2. Enter the batch volume. Use the volume of wort at the end of the boil, which is the amount that goes into the fermenter.
  3. Enter the boil gravity, for example 1.050. A bigger, stronger wort extracts less bitterness from the same hops.
  4. For hop 1, enter the weight, the alpha acid percentage printed on the package and how many minutes the hops boil. A flameout addition is 0 minutes.
  5. Add hops 2 and 3 if you use them, then press Calculate.

The Tinseth formula behind the IBU calculator

The estimate multiplies the alpha acids in the wort by a utilization figure. Utilization is the share of the alpha acids that ends up as bitter iso-alpha acids. In Tinseth's model it is the product of two factors [1].

  • Gravity factor: 1.65 times 0.000125 raised to the power of the gravity minus 1.
  • Boil time factor: 1 minus e raised to the power of minus 0.04 times the boil minutes, all divided by 4.15.

Multiplied together, the two factors reproduce the utilization table Tinseth published, which How to Brew prints: 0.176 for a 60-minute boil at a boil gravity of 1.080 [1]. The alpha acids in the wort, in milligrams per litre, are the hop weight in grams times the alpha acid fraction times 1,000, divided by the litres of wort. That step is our own working: one ounce is 28.35 grams and one US gallon is 3.785 litres. One IBU roughly represents one milligram per litre of isomerized alpha acids [1], so the IBU from an addition is its utilization times its alpha acids in milligrams per litre. The total is the sum of the additions.

Worked example: a 5 gallon pale ale

Take 5 gallons at a boil gravity of 1.050 with 1 ounce of 10% alpha acid hops boiled for 60 minutes. The gravity factor is 1.053 and the boil time factor is 0.219, so utilization is 0.231, or 23.1%. The alpha acids are 0.10 times 28.35 grams times 1,000 divided by 18.93 litres, which is 149.8 mg/L. Multiply them and you get 34.5 IBU. Now add half an ounce of 5% hops for the last 10 minutes. Utilization is only 8.4% and the extra bitterness is 3.1 IBU, so the total is 37.7 IBU.

Boil timeUtilization at 1.050IBU from 1 oz of 10% alpha acid in 5 gal
0 min0%0
10 min8.4%12.5
30 min17.7%26.6
60 min23.1%34.5

The table shows why late hops add aroma but little bitterness, and why the first 30 minutes of the boil do most of the work.

What the number means

Below about 20 IBU a beer tastes light and malty, like many lagers and wheat beers. Between 20 and 40 you find pale ales and ambers. Above 40 the beer is clearly bitter, and strong IPAs go higher still. These bands are our own rough guide, not a style standard. The scale measures iso-alpha acids, not how bitter a drinker finds the beer [2], so sweetness, malt and carbonation change what you taste.

Tips for a better estimate

  • Use the real alpha acid percentage of the hops you bought. It changes with the crop year and fades as the hops age.
  • Enter the gravity of the wort in the pot. If you boil a smaller volume and top up later, use the boil gravity and the final volume together, as most programs do.
  • Pellets usually give a little more bitterness than whole cones. This calculator does not adjust for hop form.
  • Hop stands and whirlpool additions below boiling temperature isomerize slowly. Treat them as short boil times and expect a rough figure.
  • Use the result to compare your own recipes, then adjust by taste.

Why gravity and boil time matter

Two things limit how much bitterness a hop gives you. The first is time. Alpha acids from hops are not bitter until heat converts them, and a longer boil converts more of them. The curve flattens, so doubling the boil time never doubles the bitterness. The second is the strength of the wort. A thick, sugary wort holds on to fewer bitter compounds, so the same hop addition gives a lower IBU in a barley wine than in a light lager. That is why the calculator asks for the gravity of your boil and not only the hop weight.

When you plan a recipe, work from the bitterness you want. Decide on a target IBU for the style, enter the first addition at 60 minutes, and add later additions until the total reaches the target. Late additions do little for bitterness but a lot for aroma, so many brewers keep them small in the calculator and large in the kettle.

Metric and US units

Switch the units at the top and the same maths runs with grams and litres. Hop weights in the US setting are in ounces and the batch is in gallons. You can type decimals such as 0.5 ounces or 14 grams. The result is the same either way, because the calculator converts everything to grams and litres before it works out the milligrams per litre of alpha acids.

Common mistakes

  • Entering the original gravity of the finished beer when the boil gravity is different.
  • Typing the alpha acid as a decimal such as 0.10 instead of 10.
  • Using the volume at the start of the boil instead of the volume in the fermenter.
  • Treating the result as a laboratory value. Finished beer usually measures lower than the estimate [1].

What next

Use this often? Add IBU to your Home screen.

Frequently asked questions

How does an IBU calculator work?

It multiplies the alpha acids from your hops, in milligrams per litre of wort, by a utilization factor that depends on the boil time and the gravity of the wort. The Tinseth model is one common way to get that factor.

What is a good IBU for a pale ale?

Many pale ales fall between about 25 and 45 IBU. That is a general guide rather than a rule, and the balance with malt sweetness matters as much as the number.

Why does the IBU calculator ask for boil gravity?

A denser wort lowers hop utilization, so the same hops give less bitterness in a stronger wort. The gravity factor in the Tinseth formula captures that effect.

Is the IBU result what a lab would measure?

No. It is a model estimate. Labs measure iso-alpha acids by spectrophotometry, and finished beer often reads lower than a calculated figure.

What boil time should I enter for a flameout hop addition?

Enter 0 for hops added at the end of the boil. The Tinseth formula then gives no bitterness from that addition, though the hops still add aroma and flavour.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters