Saved

Press the star next to a tool's name to save it.

All my tools

Alcohol by Volume Calculator

Use this alcohol by volume calculator to estimate the ABV of homemade beer, wine or cider from your hydrometer's original and final gravity readings.

Restored your last values ·

Enter the specific gravity before fermentation (OG) and after (FG), as 1.050 or 1050. ABV is estimated from the drop in gravity.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Alcohol by volume

–

Enter the original and final gravity, then press Calculate.

See full result

This alcohol by volume calculator estimates the alcohol content of homemade beer, wine or cider from your hydrometer readings. Enter the specific gravity before fermentation and after, choose a formula, and the alcohol by volume calculator gives the ABV, the gravity drop, the result from each common formula and the apparent attenuation.

How to use the alcohol by volume calculator

  1. Enter the original gravity (OG), measured before fermentation starts.
  2. Enter the final gravity (FG), measured when fermentation has finished.
  3. Choose a formula: beer, wine or stronger brews.
  4. Press Calculate.

How ABV is measured at home

A hydrometer measures the change in specific gravity of the liquid before and after fermentation. Specific gravity is the density of a liquid relative to that of water. Sugar makes the unfermented liquid denser than water; as yeast turns the sugar into alcohol, which is less dense than water, the gravity falls. The size of that drop tells you roughly how much alcohol was made. Brewers often write gravity without the decimal point, so 1.050 becomes 1050; you can enter either.

The formulas

Several simple formulas convert the gravity drop into alcohol by volume. A common one for beer is ABV ≈ 131 × (OG − FG). For wine, a formula attributed to Cyril Berry uses 136 instead of 131. For stronger brews, a formula that also divides by the final gravity, about 132.9 × (OG − FG) ÷ FG, gives a closer estimate. The calculator shows all three, so you can compare them.

Worked example

Say your beer started at an original gravity of 1.050 and finished at 1.010. The gravity drop is 0.040, so the beer formula gives 131 × 0.040 = 5.24% ABV. The wine formula gives 5.44% and the stronger-brew formula about 5.26%. The apparent attenuation, the share of the original gravity above 1.000 that was used up, is 80%. A wine that went from 1.090 to 0.995 would be about 12.92% by the wine formula.

Taking good readings

Take the original gravity once all the sugar is mixed in, before you add the yeast, and the final gravity when readings stay the same for a few days. Read the hydrometer at eye level, at the bottom of the curve where the liquid meets the stem. Hydrometers are calibrated for a particular temperature, so if your sample is warmer or cooler, adjust the reading as the hydrometer's instructions describe. Small reading errors make a noticeable difference, because the result multiplies the gravity drop by about 130.

Choosing a formula

The beer formula is the most widely used for typical beers. The wine formula suits wines and ciders. For brews above about 6% to 8% alcohol, the stronger-brew formula is usually closer, because it accounts for the lower density of a liquid that contains a lot of alcohol. If the formulas disagree by more than a little, take that as a sign of how uncertain any single estimate is.

Reading the results

The big number is the ABV from the formula you chose. The table shows the gravity drop, the ABV from each formula and the apparent attenuation.

What apparent attenuation means

Apparent attenuation is the share of the original gravity above water that the yeast used up. If a beer started at 1.050 and finished at 1.010, it dropped 40 of its 50 points, an apparent attenuation of 80%. It's called apparent because alcohol is lighter than water, which makes the final reading look a little lower than the sugar left alone would suggest. Brewers use it to judge whether a fermentation finished as expected for the yeast they used.

When fermentation stops early

If your final gravity is much higher than the recipe expected, fermentation may have stalled. The ABV will be lower than planned, and there may be enough sugar left to cause problems if you bottle it. Check that readings have stayed the same for a few days before you treat a gravity as final, and compare it with the expected final gravity in your recipe.

Planning a recipe

You can also use the calculator before you brew. Enter the original gravity your recipe expects and the final gravity you think the yeast will reach, and you'll see the strength you're aiming for. If it's higher or lower than you want, adjust the amount of sugar or malt so the original gravity changes, then recalculate.

Gravity points

Brewers often talk about gravity in points, the digits after the decimal point multiplied by 1,000. A gravity of 1.050 is 50 points, and a drop from 1.050 to 1.010 is 40 points. Thinking in points makes it easy to estimate ABV in your head: with the beer formula, each point of drop is worth about 0.13% alcohol.

Common mistakes

  • Taking the final reading too early. Wait until it stops changing.
  • Ignoring temperature. Correct the reading for the sample's temperature.
  • Reading the top of the curve. Read where the liquid surface meets the stem.
  • Mixing units. Enter both readings in the same form.

Tips

  • Write down every reading with the date.
  • Use a clean, dry test jar.
  • Return samples only if your process allows it; otherwise discard them.

What next

Use this often? Add Alcohol by V to your Home screen.

Frequently asked questions

How does an alcohol by volume calculator work?

It multiplies the drop in specific gravity by a factor: for beer, ABV ≈ 131 × (OG − FG).

What is the ABV of a beer from 1.050 to 1.010?

About 5.24% using the beer formula.

What is original gravity?

The specific gravity of the liquid before fermentation, measured with a hydrometer.

Which ABV formula should I use?

131 for typical beers, 136 for wine, and the formula dividing by FG for stronger brews.

Can I enter gravity as 1050?

Yes. The calculator accepts 1.050 or 1050.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters