The hydrostatic pressure calculator finds the pressure at a given depth in a liquid at rest. It adds the pressure of the liquid column, ρ g h, to the pressure acting on the surface, which is usually the atmosphere [1]. It answers the question of water pressure at depth for a pool, a tank, a well or the sea, and shows both the total and the gauge value.
How to use the hydrostatic pressure calculator
- Choose US or metric units.
- Pick the liquid, or choose another liquid and enter its density.
- Enter the depth below the surface.
- Leave gravity and external pressure empty for the usual values, or enter your own, then press Calculate.
The formula
The hydrostatic pressure is p = ρ × g × h + p₀, where ρ is the density of the liquid, g is the acceleration of gravity, h is the depth and p₀ is the external pressure at the surface [1]. The Wikipedia page on Pascal's law gives the related form Δp = ρ g Δh for the pressure difference between two points at different heights [2]. The calculator adds the external pressure to give the total.
Gauge and total pressure
The part ρ g h is the pressure of the liquid alone, and gauge instruments show it because they read the pressure above the atmosphere. Adding the external pressure p₀ gives the absolute, or total, pressure [1]. The calculator reports both, so you can match the number to the gauge you use. Enter 0 for the external pressure if you want only the pressure caused by the liquid.
A swimming pool example
Take a pool 2 m deep filled with fresh water of density 1,000 kg/m³. The liquid adds 1,000 × 9.80665 × 2, or about 19.613 kPa, and the atmosphere adds about 101.3 kPa, for a total of about 120.94 kPa, or 1.19 atmospheres. Choose metric units, fresh water and a depth of 2 to see 120.94 kPa as the total in the calculator.
Sea water and deep water
The calculator uses 1,022 kg/m³ for sea water, within the range of about 1,020 to 1,029 kg/m³ for surface seawater [5]. The Challenger Deep in the Mariana Trench is about 10,935 m deep, and Wikipedia gives a pressure of about 111 MPa at the bottom [4]. At 11,000 m, the calculator's sea water adds about 110,246 kPa, more than 1,000 times the atmosphere; this figure is our own working from the inputs. In reality, the density of water rises a little with depth, so treat it as an estimate.
Why shape does not matter
Liquid pressure depends on the depth and the density, not on the shape of the container or the amount of liquid [1]. A narrow tube and a wide lake have the same pressure at the same depth. This is the hydrostatic paradox, and it explains why a tall, thin column of water can burst a barrel. Only the vertical distance below the surface counts, which is why the box asks for depth, not for volume.
Other liquids
Choose the other liquid and enter its density to use oil, brine, mercury or any fluid. In US mode, give the density in pounds per cubic foot; in metric mode, in kilograms per cubic metre. The calculator does not guess the density of another liquid, so it asks for the value. Look up the density of the liquid at its temperature from a reliable table.
Changing gravity
The default gravity is the standard value of 9.80665 m/s² [3]. Enter another value to model the Moon, another planet or a local figure. The pressure scales in direct proportion to gravity. For any liquid on Earth the standard value is accurate to a fraction of a percent, so most users can leave the box empty.
Units and conversions
The calculator works in pascals, metres and kilograms per cubic metre. In US mode, it converts feet and pounds per cubic foot first and shows the answer in psi and kPa. The factors, 0.3048 metres per foot, 16.01846 kilograms per cubic metre per pound per cubic foot and 6,894.757 pascals per psi, are standard conversion values of our own, not from the pages we cite.
Limits
The formula assumes a liquid at rest, with a constant density and a flat surface. It does not cover moving water, waves, a closed tank under pressure, or gas, whose density changes with height. A closed container under pressure needs the pressure at the surface entered as the external pressure. Dive tables, pressure vessels and dams must be designed to the rules of the field.
Water pressure at depth in everyday terms
Water pressure at depth rises steadily as you go down. In fresh water, every 10 metres adds about 98 kilopascals, close to one extra atmosphere, which is why a swimmer feels pressure on the ears within a few metres of the surface. The same rule explains the pressure at the base of a water tower or a tank, where the depth of the liquid above the outlet sets the pressure of the supply. Use the calculator to compare a few depths and see how the total grows in a straight line with depth.
Common mistakes
- Entering the depth along a slope. The depth is measured vertically, not along a pipe.
- Forgetting the atmosphere. The total includes one atmosphere unless you set the external pressure to 0.
- Using the wrong density unit. Pounds per cubic foot in US mode, kilograms per cubic metre in metric mode.
- Using it for gases. The density of a gas changes with height, so the formula does not apply directly.
What next
Use this often? Add Hydrostatic to your Home screen.
Frequently asked questions
What is a hydrostatic pressure calculator?
A tool that finds the pressure at a depth in a liquid at rest, using the density, gravity and depth.
What is the hydrostatic pressure formula?
p = ρ g h + p₀, where p₀ is the pressure at the surface.
What is the pressure at 10 metres of water?
About 98.07 kPa gauge, or about 199.4 kPa total with one atmosphere.
Does the shape of the container matter?
No. The pressure depends only on the depth below the surface.
How do I find water pressure at depth?
Choose fresh water, enter the depth and read the total and the gauge pressure.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.