A hydrometer temperature correction calculator fixes the error that appears when you measure a sample that is warmer or cooler than the temperature your hydrometer was made for. Brewers pull a hot wort sample straight from the kettle all the time, and the reading is wrong until it is corrected. Enter the reading and the temperatures and you get the corrected specific gravity.
How to use the hydrometer temperature correction calculator
- Choose US (degrees Fahrenheit) or Metric (degrees Celsius).
- Enter the gravity you read, for example 1.050.
- Enter the temperature of the liquid in the cylinder.
- Enter the calibration temperature printed on your hydrometer. Many are 60 °F, some 68 °F, and metric ones are often 20 °C. Leave it blank for 60 °F or 20 °C.
- Press Calculate to see the corrected gravity and the size of the correction.
Why temperature changes a hydrometer reading
A hydrometer floats in proportion to the density of the liquid. Warm liquid is less dense than cool liquid, so the hydrometer sinks deeper and shows a lower number than it should. Cold liquid does the opposite and the reading comes out too high. This reasoning is our own explanation, and it matches the correction curve we use, which is positive above its reference temperature [1]. Hydrometers are made for one calibration temperature, so any other sample temperature needs a correction.
The correction formula
The calculator uses a third-order polynomial that a brewer fitted to water density data from the CRC Handbook of Chemistry and Physics [1]. For a temperature T in degrees Fahrenheit, the correction relative to 59 °F, in gravity points, is 1.313454 minus 0.132674 T plus 0.002057793 T squared minus 0.000002627634 T cubed [1]. The author states a fit of R squared 0.999969 and a data range of 0 to 212 °F [1]. The page says the correction may be worked out relative to any temperature, so we subtract the value at your calibration temperature from the value at your sample temperature. A gravity point is one thousandth of specific gravity, which is our reading of the published table and not something the page states. The corrected gravity is the reading plus that difference divided by 1,000. Celsius inputs are converted to Fahrenheit first, and the calculator accepts 32 to 212 °F.
Worked example
A hot wort sample reads 1.050 at 80 °F on a hydrometer calibrated at 60 °F. The correction at 80 °F minus the correction at 60 °F is about +2.33 points, so the corrected gravity is 1.0523. In metric the same reading at 30 °C with a 20 °C hydrometer gives +2.47 points and 1.0525. A cold sample works the other way: 1.050 at 40 °F on a 68 °F hydrometer corrects down to 1.0482.
| Sample temperature | Correction from 59 °F (points) |
|---|---|
| 50 °F (10 °C) | -0.6 |
| 59 °F (15 °C) | 0 |
| 68 °F (20 °C) | 0.9 |
| 77 °F (25 °C) | 2.06 |
| 86 °F (30 °C) | 3.46 |
| 104 °F (40 °C) | 6.89 |
The values in the table are from the published water density table [1], and the polynomial agrees with them to within about 0.2 points. Subtract the figure for your calibration temperature to adapt them to another hydrometer.
Tips for accurate gravity readings
- Read the number at the bottom of the curved surface of the liquid, with your eye level with it.
- Spin the hydrometer gently to dislodge bubbles, which lift it and give a false high reading.
- For fermenting beer, degas the sample first: carbon dioxide bubbles cling to the glass.
- Let the sample cool to the calibration temperature when you can. A correction is an estimate, and a cooled sample needs none.
- Check your hydrometer in plain water at its calibration temperature. It should read 1.000.
When to correct and when to cool
Correction is handy when the sample is close to the calibration temperature. A reading taken within a few degrees of it needs only a tiny adjustment. A sample from a hot kettle is another matter: the further you are from the calibration temperature, the more the answer depends on the curve and on the sugar in the liquid. For the most reliable numbers, cool a small sample in a freezer or an ice bath to the calibration temperature and then read it. Use the calculator as a quick check, not as a replacement for good technique.
Wine makers and cider makers use the same tool. The correction depends on how much the liquid expands with heat, so it works best for thin liquids and for wort at normal brewing gravities. For very strong or syrupy liquids the real expansion differs and a lab correction table may suit better.
Reading your hydrometer scale
Most brewing hydrometers show specific gravity from 1.000 to about 1.120. Some also show Brix or Plato scales, and some show potential alcohol. This calculator works with the specific gravity scale only, so enter the number from that scale. If you only have a Brix scale, convert it first before you use this tool.
Common mistakes
- Assuming every hydrometer is calibrated at 60 °F. Read the scale or the paper strip inside it.
- Adding the correction when the sample was colder than the calibration temperature. Cold samples read high and the correction is taken off.
- Mixing up Celsius and Fahrenheit. Pick the right unit before you type the temperature.
- Correcting a reading taken on a very sugary or alcoholic liquid and expecting laboratory accuracy.
What next
Use this often? Add Hydrometer T to your Home screen.
Frequently asked questions
How does a hydrometer temperature correction calculator work?
It uses a curve fitted to water density to work out how much the sample temperature shifts the reading compared with the calibration temperature, then adds that shift to your reading.
Do I add or subtract the temperature correction?
Add it when the sample is warmer than the calibration temperature, because the hydrometer reads low. Subtract it when the sample is colder, because the reading is too high.
What calibration temperature does my hydrometer use?
Check the scale or the paper strip inside the stem. Many brewing hydrometers use 60 degrees Fahrenheit and some use 68 degrees Fahrenheit or 20 degrees Celsius.
How accurate is this correction?
It is a fit to water density, so it is very close for thin liquids and a little less exact for sugary wort. Cooling the sample to the calibration temperature removes the need for it.
What temperature range does the calculator accept?
It accepts sample and calibration temperatures from 32 to 212 degrees Fahrenheit, which is 0 to 100 degrees Celsius.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.