A horse weight calculator estimates how much a horse weighs from a tape and a stick instead of a scale. Enter the height, neck, girth and body length for the four-measurement formula, which also gives an ideal weight, or use the older weight tape rule that needs only the girth and the length.
How to use the horse weight calculator
- Choose US or metric units.
- Pick the four-measurement method, or the weight tape method.
- Choose Arabian, pony or stock horse for the first method.
- Enter the measurements and press Calculate.
The four-measurement formula
The main method follows a 2014 study by Martinson and colleagues in the Journal of Animal Science [1]. With every measurement in centimeters, the weight in kilograms is the girth to the power 1.486, times the length to the power 0.554, times the height to the power 0.599, times the neck to the power 0.173, all divided by a number that depends on the type of horse [1]. The calculator converts inches for you, so you can use a tape measure in either unit.
Arabian, pony and stock horse
The divisor is 3,596 for an Arabian, 3,606 for a pony and 3,441 for a stock horse [1]. The study does not tell you which type to pick for a given horse, so the tool starts with the Arabian figure as a default of our own. A heavier-boned stock horse gets a smaller divisor, which gives a larger weight for the same measurements. Pick the type closest to your horse, and treat a cross between types as a rough guess.
The ideal weight
The same abstract gives an ideal weight that uses only the length and the height: 2.8 times the length plus 4.2 times the height, minus 611 for an Arabian, 606 for a pony or 577 for a stock horse [1]. The calculator shows the estimated weight beside this ideal figure, and says how far apart they are. It does not decide whether a horse is too heavy or too light, because a number cannot replace a body condition score or a vet's opinion.
A worked example
Take a height of 58 inches, a neck of 36 inches, a girth of 70 inches and a length of 58 inches, for an Arabian. Working the published formula through gives 933.67 pounds, or 423.51 kilograms, and an ideal weight of 926.47 pounds, or 420.24 kilograms. For a pony the same numbers give 931.08 pounds, and for a stock horse 975.73 pounds. These are our own results from the formula.
Where to measure
The study abstract does not describe how each body part was measured, so measure the height and neck the same way each time. An extension article on weight tapes says to measure the girth just behind the elbow after the horse breathes out, and the length from the point of the shoulder to the point of the buttock [2]. Keep the horse standing square on level ground, and take each measurement twice. A sagging tape or a slouching horse can move the answer by several pounds.
The weight tape rule
The second method needs only two numbers. An extension service article gives the weight in kilograms as the girth squared times the length, divided by 11,880, with both measurements in centimeters [2]. Changing that rule to inches and pounds gives a divisor of about 330, which is our own conversion, and the tool uses it for the inch version. For a girth of 78 inches and a length of 65 inches, the inch rule gives 1,198.4 pounds, and the tool also shows the result of the metric constant for comparison.
Why web pages disagree
Some web pages add a fixed amount to the inch formula, and others do not, so two tapes can disagree by tens of pounds. The extension article works in centimeters and quotes a chart reading of about 475 kilograms for a girth of 180 centimeters and a length of 175 centimeters [2]. Our formula gives 477.27 kilograms, which is within the error of reading a chart. We use no added constant.
How accurate is it
The study behind the main formula measured 629 adult horses and ponies at two horse shows in Minnesota. It reports an R squared of 0.92 and a mean squared error of 22 kilograms for the weight equation [1]. The extension article warns that tape estimates can be out by up to 100 pounds, and that they are unreliable for pregnant mares, foals, miniature horses and very fit racehorses [2]. If the height is under 112 centimeters, our result adds a caution, a limit of our own.
Units and rounding
In US mode you enter inches and the tool shows pounds first, with kilograms in brackets. In metric mode you enter centimeters and see kilograms first. Both are rounded to five significant figures, which is more precision than the measurements deserve, so round to the nearest 5 or 10 pounds in practice. The choice of units never changes the logic: the calculator converts everything to centimeters and kilograms and uses the published constants.
Using the result
A weight estimate helps you track changes over weeks, plan feed amounts with your vet, or decide whether a trailer or a rug size is suitable. It should not be used to calculate a dose of a drug, a wormer or a sedative, where a small error can matter. For that, use a livestock scale or ask your vet to weigh the horse. Measure on the same day each month and compare the estimates, rather than relying on one reading.
Common mistakes
- Measuring the girth over the saddle area. Measure just behind the elbow, after the horse breathes out.
- Mixing inches and centimeters. Choose the matching unit before you enter the numbers.
- Using a pony in the Arabian setting. The divisor changes the result by a few pounds.
- Treating the estimate as a dose weight. Use a scale or ask a vet instead.
What next
Use this often? Add Horse Weight to your Home screen.
Frequently asked questions
What is a horse weight calculator?
It estimates a horse's weight from body measurements, without a scale.
Which formula does it use?
The Martinson four-measurement formula, with a weight tape rule as a second method.
How accurate is a weight tape?
Tape estimates can be out by up to 100 pounds, so they suit tracking, not drug doses.
Where do I measure the girth?
Just behind the elbow, after the horse breathes out.
Can I use it for a foal or a pregnant mare?
No. The formulas are unreliable for foals, pregnant mares and miniature horses.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.