Saved

Press the star next to a tool's name to save it.

All my tools

Hohmann Transfer Calculator

Use this Hohmann transfer calculator to find the two burns, the total delta-v and the transfer time between two circular orbits around Earth, the Sun or another body.

Restored your last values ·

km³/s²

Choose the central body, then enter the radius of the starting orbit and of the target orbit, measured from the centre of the body (not the surface). You get the two burns, the total delta-v and the transfer time.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the body and enter the two orbit radii, then press Calculate.

See full result

A Hohmann transfer calculator finds the velocity change, delta-v, needed to move a spacecraft between two circular orbits around the same body, using the classic two-burn ellipse. Enter the two orbit radii and it returns each burn, the total delta-v and the time of flight.

How to use the Hohmann transfer calculator

  1. Choose the central body: Earth, the Sun, or another body with its own μ.
  2. Enter the radius of the starting orbit and of the target orbit, from the body’s centre.
  3. Press Calculate to see the two burns, the total and the transfer time.

What a Hohmann transfer is

A Hohmann transfer is the two-impulse manoeuvre that takes a spacecraft from one circular orbit to another in the same plane along a single ellipse that touches both circles [1]. The first burn puts the craft on the ellipse, and the second, half an orbit later, circularises it at the new radius [1]. It often uses the lowest possible amount of impulse, although some bi-elliptic transfers need less when the larger radius is about 11.94 times the smaller or more [1]. That is why it is the standard first estimate for mission design.

The central body and its μ

All the speeds depend on the standard gravitational parameter μ, the product of the gravitational constant and the mass of the central body [1]. The Wikipedia page gives Earth’s value as about 3.986 × 10¹⁴ m³/s² [1], which is about 398,600 km³/s² in kilometres; the standard gravitational parameter article lists the same figure and defines μ as GM [2]. For the Sun, the tool multiplies the Sun’s mass of about 1.989 × 10³⁰ kg [4] by the gravitational constant 6.674 × 10⁻¹¹, a standard value that we added ourselves.

Circular orbit speed

A body in a circular orbit of radius r moves at v = √(μ ÷ r), which follows from the vis-viva equation with a = r [3]. A lower orbit is faster and a higher orbit is slower. At 6,678 km from Earth’s centre, an altitude of 300 km, the speed is 7.7258 km/s, and in a geostationary orbit at 42,164 km it is 3.0747 km/s. The calculator shows both so that you can see how much the craft speeds up or slows down at each burn.

The transfer ellipse

The transfer ellipse has its nearest point at the smaller radius and its farthest point at the larger one. Its semi-major axis is the mean of the two radii, a = (r₁ + r₂) ÷ 2, and its eccentricity is (r₂ − r₁) ÷ (r₂ + r₁); both are our own working from the geometry of an ellipse. The speed at any point follows from the vis-viva relation, v = √(μ (2 ÷ r − 1 ÷ a)) [3]. The tool uses these to give the speed at each end of the ellipse.

The two burns

The first burn changes the speed from the circular speed to the ellipse speed at the starting radius, Δv₁ = v(ellipse) − v(circle) [1]. The second burn at the target radius changes it from the ellipse speed to the new circular speed [1]. The total delta-v is the sum of the two sizes, Δv = Δv₁ + Δv₂ [1]. If you go to a lower orbit, both burns slow the craft down, and the tool says so for each one.

The geostationary example

The Wikipedia page works out a transfer from a 300 km circular orbit to geostationary orbit: Δv₁ is 2.42 km/s, Δv₂ is 1.46 km/s and the total is 3.88 km/s [1]. For the same radii of 6,678 km and 42,164 km, this calculator gives 2.4258 km/s, 1.4668 km/s and 3.8926 km/s. The differences are about 0.01 km/s, so treat the page’s rounded figures and the tool’s as agreeing closely rather than to the last digit.

The transfer time

The transfer takes half of the period of the ellipse, which the Wikipedia page describes as one half of the orbital period of the whole ellipse [1]. In symbols t = π √(a³ ÷ μ), the standard Kepler relation, which is our own working. For the geostationary transfer above it is 5.275 hours. For a transfer from Earth to Mars around the Sun it is a matter of months, since the semi-major axis is of the order of 176 million km.

The Earth to Mars example

Choose the Sun as the central body and enter the radii of Earth’s orbit and Mars’s orbit to model a transfer between the two planets. For the Earth and Mars radii that we tested, the total delta-v is 4.6928 km/s and the flight time is about 233 days. The semi-major axis is the mean of the two radii, as explained above, and the result ignores escape from Earth’s gravity and the launch window.

What the model leaves out

The two-burn model assumes the burns are instantaneous [1], both orbits are circular and share a plane, and the only force is the gravity of one body. It does not include gravity losses during a long burn, a change of inclination, the pull of the Moon or planets, or the time a real spacecraft needs to wait for the right alignment. For a planet-to-planet trip, it also ignores the escape from the first planet’s gravity. Read the result as a first estimate.

Using the numbers

The delta-v tells you how hard the engine has to work, and it ties into the rocket equation, which gives the propellant for a chosen engine and mass. This tool stops at the delta-v. Compare two target orbits to see how the cost grows with the radius, or swap the two radii to check that coming back down costs the same total. Always use the distance from the centre of the body, so add the body’s radius to any altitude.

Common mistakes

  • Using the altitude instead of the radius. Add the body’s radius to the height above the surface.
  • Mixing miles and kilometres. Pick one unit system with the switch and keep to it.
  • Expecting a real mission figure. Real transfers add losses, margins and plane changes.
  • Forgetting the second burn. The total delta-v is the sum of both burns, not just the first.

What next

Use this often? Add Hohmann Tran to your Home screen.

Frequently asked questions

What is a Hohmann transfer calculator?

It finds the delta-v of the two burns that move a craft between two circular orbits in the same plane along one transfer ellipse.

Does it work for transfers to Mars?

Yes, choose the Sun as the central body and enter the two orbit radii from the Sun’s centre, but it ignores escape from the planet and the launch window.

Why is the radius from the centre of the body?

The orbit equations use the distance from the centre, so add the body’s radius to an altitude above the surface.

Is the Hohmann transfer the cheapest?

Often, but not always: it usually uses the lowest amount of impulse, though some bi-elliptic transfers need less when the radius ratio is about 11.94 or more.

Why do the numbers differ a little from the Wikipedia example?

The page rounds its intermediate speeds, so the total differs by about 0.01 km/s from the tool’s 3.8926 km/s.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools