A Graham's law calculator compares how fast two gases effuse or diffuse. Enter the molar masses and it gives the ratio of the rates, which depends on the square root of the molar masses. You can also work backwards from a known gas and a measured ratio to the molar mass of an unknown gas.
How to use the Graham's law calculator
- Choose the job.
- Enter the molar masses, or the known molar mass and the rate ratio.
- Press Calculate.
The law
Graham's law says that the rate of effusion of a gas is inversely proportional to the square root of its molar mass. The page writes it as rate₁ ÷ rate₂ = √(M₂ ÷ M₁), with the rate measured as a volume or a number of moles per unit time [1]. The same relation rearranged gives the unknown molar mass as M₂ = (rate₁ ÷ rate₂)² × M₁ [1]. It also holds in terms of density at the same temperature and pressure [1].
Worked example, ratio
The page's example compares hydrogen and oxygen. The ratio of rates is √(32 ÷ 2) = 4, so hydrogen molecules effuse four times faster than oxygen molecules [1]. Enter 2 and 32 to see it. The calculator also gives the times: for equal amounts of gas the lighter gas needs one quarter of the time, since time is the inverse of rate. That time relation is our own deduction, as the page does not state it.
Worked example, unknown gas
The page also describes an unknown gas that diffuses 0.25 times as fast as helium, and finds a molar mass of 64 grams per mole, which it identifies as sulfur dioxide [1]. In the calculator choose the second mode, enter 4 for helium and 0.25 for the ratio. Since the rate ratio is unknown over known, the molar mass is the known value divided by the square of the ratio, 4 ÷ 0.0625 = 64.
Effusion and diffusion
Effusion is the escape of gas through a very small hole. The page says the law is most accurate for molecular effusion, which involves one gas at a time passing through a hole, and only approximate for the diffusion of one gas in another or in air [1]. In diffusion, collisions with the other gas slow the molecules, so measured ratios differ from the law.
Where it comes from
The law follows from kinetic theory: at the same temperature molecules have equal average kinetic energy, so lighter molecules move faster, in proportion to one over the square root of the mass [1]. That is why helium balloons deflate faster than ones filled with air, and why hydrogen leaks through small gaps more easily than heavier gases.
Enrichment of uranium
The page recalls that uranium hexafluoride was forced repeatedly through porous barriers, each pass leaving the gas a little more enriched in the lighter uranium-235 [1]. The difference in the rates per pass is tiny, which is why the process had to be repeated many times. It is a dramatic use of the law, though the page gives no figures for it.
Using the calculator
For two gases, enter their molar masses in grams per mole in any order. The result tells you which is faster. For an unknown gas, enter the known gas and the measured ratio of the unknown rate to the known rate. Compare the answer with a table of molar masses to identify the gas.
Why lighter gases are faster
At a given temperature the molecules of every gas have the same average kinetic energy. Since kinetic energy is half the mass times the speed squared, a lighter molecule must move faster to carry the same energy, and the speed is in proportion to one over the square root of the mass. Hydrogen, with a molar mass of 2, therefore moves four times as fast as oxygen with a molar mass of 32. The effusion rate follows the same ratio, because it depends on how often molecules reach the hole.
More comparisons to try
Compare helium with a molar mass of 4 and nitrogen with 28: the ratio is √7, about 2.65. Compare methane with 16 and carbon dioxide with 44: the ratio is about 1.66. These show why a helium balloon deflates in a day or two while an air-filled one lasts much longer. The values are our own calculations.
Checking your work
The faster gas is always the lighter one, so if your answer says otherwise, recheck the order of the two masses. The ratio of rates is also the inverse of the ratio of times for the same quantity of gas to escape, a useful cross-check in laboratory experiments.
Experimental tips
In a typical experiment, two gases are released at opposite ends of a tube and meet at a point that depends on their rates. The distances covered are in the ratio of the rates, so you can use the calculator to predict where the ring of product forms, and to check the result against what you measured.
Common mistakes
- Inverting the ratio. Rate ratio is gas 1 over gas 2.
- Comparing at different temperatures. Both gases must be at the same temperature and pressure.
- Forgetting the square root. The ratio is of the square roots of the masses.
- Using it for gases that react. The law does not cover chemical effects.
What next
Use this often? Add Graham's Law to your Home screen.
Frequently asked questions
What is a Graham's law calculator?
A tool that compares the effusion rates of two gases from their molar masses and finds an unknown molar mass.
What is Graham's law formula?
rate₁ ÷ rate₂ = √(M₂ ÷ M₁).
How much faster does hydrogen effuse than oxygen?
Four times, since √(32 ÷ 2) = 4.
How do I find an unknown molar mass?
M₂ = (rate₁ ÷ rate₂)² × M₁. A gas that is 0.25 times as fast as helium has a molar mass of 64 g/mol.
Does Graham's law work for diffusion?
Only approximately. It is most accurate for effusion of one gas through a small hole.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.