Saved

Press the star next to a tool's name to save it.

All my tools

Fret Calculator

Use this fret calculator to find the distance from the nut to each fret and the gap between frets for any scale length, with presets for guitars, basses and ukuleles.

Restored your last values ·

Pick an instrument, or enter the scale length, the distance from the nut to the bridge saddle. You get the distance from the nut to every fret, and the gap between each fret and the one before it. Mark each position from the nut to place the frets.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose an instrument or enter a scale length, then press Calculate.

See full result

A fret calculator works out where the frets of a guitar, bass, ukulele or any fretted instrument go. Enter the scale length, which is the length of the vibrating string from the nut to the bridge saddle, and you get the distance from the nut to every fret and the gap between neighbouring frets. You can pick a common instrument, or type your own length in inches or millimetres. It runs in your browser.

How to use the fret calculator

  1. Choose US (inches) or Metric (millimetres).
  2. Pick an instrument, or enter the scale length.
  3. Enter the number of frets you want, or leave it at 24.
  4. Press Calculate.

The rule behind fret spacing

The Wikipedia article on frets explains that the ratio of the distances of two consecutive frets to the bridge is 2^(1/12), which is approximately 1.059463. Each fret shortens the vibrating string by that factor, and a string shortened by it plays a note one semitone higher.[1] The page adds that, in theory, the twelfth fret should divide the string into two exact halves, since twelve semitones make an octave.[1] From the ratio, the distance from the bridge to fret n is the scale length divided by 2^(n/12), so the distance from the nut to fret n is L × (1 − 2^(−n/12)), where L is the scale length. This step is our own derivation from the page's ratio, and the calculator uses it.

A worked example

Take a scale length of 25.5 inches, which is common on electric guitars of the Fender type. The first fret is at 25.5 × (1 − 2^(−1/12)), which is 1.431 inches from the nut. The second is at 2.782 inches, and the gap between them is 1.351 inches. The frets get closer as you go up the neck, because each one takes the same share of what is left of the string. The twelfth fret is at 25.5 × (1 − 0.5) = 12.75 inches, exactly half of the scale length, which is the check that the page describes. The calculator lists all the frets in this way, and gives the gaps so that you can check them as you measure.

Scale lengths of common instruments

The article on scale length lists many typical values. A classical guitar is 25.6 inches (650 mm), and later 26 inches. A Gibson electric guitar is 24.75 inches (630 mm), and a Fender Telecaster, Stratocaster or Jazzmaster is 25.5 inches (650 mm). A Precision bass is 34 inches (860 mm). Ukuleles are 13.6 inches (350 mm) for a soprano, 14.75 inches (375 mm) for a concert, 17 inches (430 mm) for a tenor and 20.1 inches (510 mm) for a baritone.[2] The calculator offers these as presets, and for any other instrument you can enter the length yourself. A longer scale gives wider fret spacing and more string tension at the same pitch.

Measuring the scale length

The scale length of a finished instrument is twice the distance from the nut to the twelfth fret. If you do not know it, measure from the nut to the twelfth fret and double it, which is the simple way that the rule above gives. For a new build, choose the scale length first, mark the nut position, and measure every fret from the nut, not from the previous fret, so that small errors do not add up. The calculator gives the distance from the nut for this reason.

Compensation at the bridge

The fret page notes that the bridge position is adjusted slightly so that the twelfth fret plays exactly in tune. This is done to offset the increase in string tension when a string is pressed down to a fret.[1] The distances in the calculator do not include this, because the amount depends on the strings and the action. In practice, the saddle sits a little farther from the nut than the scale length, and you set it by ear or with a tuner. The page gives no amounts.

Metric and US units

Choose the unit that you work in. With millimetres, a scale length of 648 mm gives a first fret at 36.4 mm and a twelfth fret at 324 mm. The distances are shown to the nearest thousandth of an inch or the nearest hundredth of a millimetre, which is finer than a saw cut, so round to what your tools can do. Fret slots are often cut with a template or a jig, and the table of distances is what you set it up from.

Building a neck

Print or write down the list and mark the positions on the fretboard blank with a sharp pencil or a marking knife, working from the nut end with a steel rule. A fret slotting jig or a template saves time, and it keeps the slots square. Check the marks against the twelfth fret, which should be at half of the scale length, before you cut. If it is off, find the error before any wood is cut, because a mistake early on is carried to every fret after it.

Common mistakes

  • Measuring fret to fret. Measure each from the nut.
  • Using the string length, not the scale length. The scale length ends at the saddle.
  • Ignoring compensation. The saddle needs a small offset.
  • Mixing units. Choose inches or millimetres before you enter a length.

What next

Use this often? Add Fret to your Home screen.

Frequently asked questions

What is a fret calculator?

A tool that finds where the frets go on a fretted instrument from its scale length.

What is the fret spacing formula?

The distance from the nut to fret n is L × (1 − 2^(−n/12)), where L is the scale length.

Where is the twelfth fret?

At half of the scale length. For 25.5 inches, it is at 12.75 inches.

What scale length does a Strat use?

25.5 inches, as does a Telecaster. A Gibson-style guitar is 24.75 inches.

Why is the bridge placed a little farther away?

Pressing a string to a fret raises its tension, so the saddle is moved slightly to keep the twelfth fret in tune.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Education Tools