Saved

Press the star next to a tool's name to save it.

All my tools

BPM Calculator

Use this BPM calculator to find note lengths and delay times in milliseconds from a tempo, the Italian tempo name, and how long a piece of music lasts.

Restored your last values ·

Enter the tempo in beats per minute. The calculator gives the length of every note value in milliseconds, which you can use for delay and echo times, and the Italian name of the tempo. For a length, enter the number of bars and the beats in each bar.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want, enter the tempo, then press Calculate.

See full result

A BPM calculator turns a tempo in beats per minute into times that you can use. It gives the length of a beat and of every note value in milliseconds, which you can set as delay times and echo times on a mixer, a synthesizer or an effects pedal, and it names the tempo, such as andante or allegro. A second mode works out how long a piece lasts from the number of bars and the tempo. It runs in your browser.

How to use the BPM calculator

  1. Choose note lengths or length of a piece.
  2. Enter the tempo in beats per minute.
  3. For a length, enter the number of bars and the beats in each bar.
  4. Press Calculate.

What BPM means

The Wikipedia article on tempo says that tempo, when it is measured in beats per minute, is the speed or pace of a given composition, and that if a specific metrical pace is wanted, it is usually measured in beats per minute, written bpm or BPM. Its examples are that a tempo of 60 beats per minute signifies one beat per second, while a tempo of 120 beats per minute is twice as rapid.[1] The beat is usually the note value that the bottom number of the time signature indicates. In 4/4 time, the beat is a crotchet, which is a quarter note.[1] So one beat lasts 60 ÷ BPM seconds, or 60,000 ÷ BPM milliseconds. At 120 BPM, a beat is 500 ms. This is a short derivation from the page's examples.

Note values and their lengths

The article on note values says that unmodified note values are fractional powers of two. A whole note is 1, a half note is 1/2, a quarter note is 1/4, an eighth note is 1/8 and a sixteenth note is 1/16 of a whole note.[2] With the quarter note as the beat, a half note lasts two beats, a whole note four beats, an eighth note half a beat and a sixteenth a quarter of a beat. At 120 BPM, these are 1,000 ms for a half note, 2,000 ms for a whole note, 250 ms for an eighth note and 125 ms for a sixteenth. The calculator lists every value, down to the thirty-second note.

Dotted notes and triplets

A dot adds the next briefer note value, which makes the note one and a half times as long as it was.[2] A dotted quarter note at 120 BPM is 750 ms, and a dotted eighth is 375 ms, a length that is popular for delay effects. The page says that a note value can be divided into three equal parts, or some other number, with tuplets, though it does not give the triplet length.[2] In the usual triplet, three notes fit in the time of two, so each lasts two thirds of the straight note. A quarter-note triplet at 120 BPM is 333.3 ms, and an eighth-note triplet is 166.7 ms. The calculator gives dotted and triplet times for the half, quarter, eighth and sixteenth notes.

Delay and echo times

Setting a delay to a note value keeps the echoes in time with the music. At 120 BPM, a quarter-note delay repeats every 500 ms, so the echo falls on the next beat. An eighth-note delay at 250 ms gives a rhythm of two echoes per beat, and a dotted-eighth delay at 375 ms gives the classic rhythm that is heard in much rock and pop. Many delay units ask for a time in milliseconds, so you can read the value from the table and type it in. The same numbers can set the length of a tremolo, a gate or a sequencer step.

Italian tempo names

The tempo article lists the usual Italian words with rough ranges for 4/4 time: largo 40 to 66 BPM, adagio 44 to 66, andante 56 to 108, moderato 108 to 120, allegro 120 to 156, vivace 156 to 176, presto 168 to 200, and prestissimo 200 and over. It adds that a metronome marking cannot be deduced from one of the descriptive terms alone, and that meanings have shifted, so that a modern largo is slower than adagio, but in the Baroque period it was faster.[1] The calculator shows every name whose range contains your tempo, so that 120 BPM is the top of moderato and the start of allegro. The marks are guides, not rules.

The length of a piece

The second mode finds how long a piece lasts. The number of beats is the number of bars times the beats in each bar, and the time is the beats times 60 divided by the tempo. A piece of 32 bars in 4/4 at 120 BPM has 128 beats and lasts 64 seconds, which is 1:04. A piece of 16 bars of 3/4 at 90 BPM has 48 beats and lasts 32 seconds. Use it to plan a track, a loop or a dance routine. The metronome that Johann Nepomuk Maelzel invented made marking a tempo in beats per minute popular in the first half of the 19th century.[1]

Tips for choosing a tempo

A walking pace is about 100 to 120 beats per minute, and many dance tracks sit near 120 to 130. A resting heart rate is about 60 to 80. Slow ballads are often around 60 to 80 BPM, and fast punk or drum and bass passes 160. If you are matching two tracks, the calculator helps you to see the note lengths that line up, for example that a track at 90 BPM has a quarter note of 666.7 ms, while one at 120 BPM has 500 ms, so check the numbers before you set a delay.

Common mistakes

  • Taking the beat as the wrong note. In 6/8, the beat may be a dotted quarter note.
  • Mixing up beats per minute and bars per minute. The tempo counts beats.
  • Using straight times for triplet music. A triplet is two thirds as long.
  • Typing seconds into a box that wants milliseconds. 0.5 seconds is 500 ms.

What next

Use this often? Add BPM to your Home screen.

Frequently asked questions

What is a BPM calculator?

A tool that converts a tempo in beats per minute to the length of beats and notes, which are used for delay times, and finds the length of a piece.

How do I convert BPM to milliseconds?

Divide 60,000 by the BPM. At 120 BPM, a beat is 500 ms.

How long is a dotted quarter note?

One and a half beats. At 120 BPM, that is 750 ms.

What is the length of a triplet?

Two thirds of the straight note. An eighth-note triplet at 120 BPM lasts 166.7 ms.

How do I find the length of a song from bars and tempo?

Multiply the bars by the beats per bar, and multiply by 60 divided by the BPM. 32 bars in 4/4 at 120 BPM take 64 seconds.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters