A fishing reel line capacity calculator works out how much of a different fishing line will fit on a reel, from the capacity that the maker prints on the spool. Enter the diameter and the length of the line that the reel is rated for, then enter a new diameter to find how long a line of that thickness will fit, or a new length to find how thick the line can be. It uses a simple volume relation, and it runs in your browser.
How to use the fishing reel line capacity calculator
- Choose US or metric units.
- Enter the diameter and the length of the line that the reel is rated for, which are printed on the spool or the box, for example 0.23 millimeters and 200 meters.
- Choose whether to find the new length or the new diameter.
- Enter the new diameter, or the new length.
- Press Work out the fit.
The relation
Line on a spool can be treated as a thin cylinder, and the volume of a cylinder is pi times the radius squared times the height. [1] For a given line, the space it fills is therefore proportional to its diameter squared times its length, and this proportionality is our own working, not a figure published by a reel maker. The calculator therefore takes the diameter squared times the length as a measure of the capacity. To find the length of a new line, it divides the capacity by the square of the new diameter. To find the diameter of a new line, it divides the capacity by the new length and takes the square root. The result is in the same units as the figures that you enter.
An example
Suppose that a reel is rated for 200 meters of line that is 0.23 millimeters thick. The capacity is 0.23 squared times 200, which is 10.58. If you want to use a thicker line of 0.30 millimeters, the length that fits is 10.58 divided by 0.30 squared, which is about 117.6 meters. If instead you want 100 meters of line, the thickest line that fits has a diameter of the square root of 10.58 divided by 100, which is about 0.33 millimeters. These numbers are our own worked example.
Why the diameter counts twice
A thicker line takes up more room in two ways: it is wider, and each turn on the spool is bigger. The result is that doubling the diameter cuts the length that fits by a factor of four, not two. This is why a heavy line fills a reel so quickly, and why a switch from a thin braid to a thick nylon line can reduce the capacity a great deal.
Limits of the method
This is not an exact volume. It does not use the size of the spool, the way that the line is wound on, or the fact that the line is not perfectly round. Different lines of the same stated diameter can also differ in how they pack, for example a braid packs more densely than nylon of the same strength. Use the result to compare lines and to get a first estimate, and then check the reel's own table or fill the spool a little less than full.
Choosing a line
When you pick a line, think about the fish that you want to catch, the strength that you need and the type of reel. Thinner lines give more capacity and cast farther, while thicker lines are stronger and more resistant to wear. The calculator helps with the capacity part of the choice, and your own needs decide the rest.
A second example in US units
A reel is rated for 220 yards of line of 0.009 inch diameter. The capacity figure is 0.009 squared times 220, which is 0.01782. If you want to try a line of 0.012 inch, the length that fits is 0.01782 divided by 0.012 squared, which is about 123.8 yards. The thicker line is a third wider, but the length that you can fit falls by more than a third, because the diameter counts twice. These numbers are our own illustration of the formula.
Backing and filling the spool
Anglers often put a layer of cheap line, called backing, under the main line, so that the spool is filled to the right level with less of the costly line. If you use backing, work out how much of the main line you need to fill the rest of the spool. The calculator can help to compare the fit of the main line, and then you can fill the remaining space with the backing. As a general rule, do not overfill the spool, because loose coils can tangle when you cast.
Checking against the reel's table
Many reels have a table in the manual or on the box that lists the capacity for several line diameters. If your reel has one, use it as the final check, since it is based on the real spool. Use the calculator when the table does not list the line that you want, or to compare your options before you buy.
Common mistakes
- Mixing units. Use the same unit for both diameters.
- Forgetting to square. The diameter matters twice.
- Filling the spool to the brim. Leave a little room.
- Comparing different line types. Braid and nylon pack differently.
What next
Use this often? Add Fishing Reel to your Home screen.
Frequently asked questions
What is a fishing reel line capacity calculator?
A tool that works out how much of a different line fits on a reel from the capacity that the maker prints on the spool.
How is the capacity worked out?
The page takes capacity as proportional to the line diameter squared times the length.
What happens if I use a thicker line?
The length that fits falls with the square of the diameter, so doubling the thickness cuts the length to a quarter.
Is the result exact?
No. It compares lines only and ignores the spool's size, the winding and the type of line, so leave a margin.
Can I find the thickest line for a given length?
Yes. Choose New line diameter, enter the length you want, and the calculator gives the largest diameter that fits.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.