This fire glass calculator works out how much fire glass you need for a gas fire pit or fireplace pan, and how much lava rock if you use it as a base layer. Choose a round or rectangular pan, enter its inside size and the depth you want, and the fire glass calculator gives the pounds of fire glass, the number of 10-pound jars and, for a layered fill, the lava rock too.
How to use the fire glass calculator
- Choose inches or centimeters. Inches are the default.
- Choose the pan shape and enter its inside diameter, or its inside length and width.
- Enter the depth of fire glass you want.
- Enter a lava rock depth if you'll put lava rock underneath, then press Calculate.
The fire glass formula
According to The Magic of Fire's guide, you multiply the pan's inside area in square inches by the depth in inches, then by 0.053, to get pounds of fire glass. Lava rock is lighter, about half the weight for the same space, so you multiply by 0.0265 instead. For a round pan, the area is 3.14 × radius × radius; for a rectangle, it's length × width.
fire glass (lb) = area (sq in) × depth (in) × 0.053
As a rule of thumb, the guide says that's about 7.6 pounds of fire glass per square foot of pan for every inch of depth. If you enter centimeters, the calculator converts them to inches first.
Worked example
A 30-inch round pan has an area of about 707 square inches. For 1 inch of fire glass, that's 707 × 1 × 0.053 = 37.5 pounds, or four 10-pound jars, matching the guide's example of about 37 pounds. For 2 inches, it's about 75 pounds. A 36 × 12-inch rectangular pan with 2 inches of glass needs 432 × 2 × 0.053 = about 45.8 pounds.
The guide's layered example uses the same 30-inch pan with 2 inches of lava rock and 1 inch of fire glass on top: about 37 pounds of lava rock and 37 pounds of fire glass.
How deep should fire glass be?
The right depth depends on your burner and gas type, so the guide stresses checking the burner manufacturer's manual. It says propane burners generally should be covered with no more than 1 to 1.5 inches of fire media above the burner, while natural gas burners can take 2 to 4 inches, using the minimum depth needed for good performance. Jet-style burners shouldn't be buried; keep the media level with or below their nozzles.
Lava rock and fire glass together
Lava rock costs less than fire glass and covers about twice the space per pound, so many people fill the bottom of the pan with lava rock and put fire glass only on top. The guide suggests filling lava rock from the bottom of the pan to about 1/4 inch above the burner, so the burner is just covered, then adding fire glass up to the maximum depth the burner manual allows. Check that your burner allows mixed media first.
Reading the results
The big number is the fire glass needed in pounds. The table shows the number of 10-pound jars to buy, the weight in kilograms, the lava rock and bags if you entered a lava rock depth, and the pan's area.
Round versus square pans
A square pan holds more than a round pan of the same width, because the circle leaves the corners empty. A 30-inch round pan has about 707 square inches of area, while a 30 × 30-inch square pan has 900 square inches, about 27% more, so it needs about 47.7 pounds of fire glass for 1 inch of depth instead of 37.5. Measure the inside of the pan rather than the outside of the fire pit, since the walls and rim can take several inches.
Metric measurements
If you measure in centimeters, choose Centimeters and enter the pan size and depths in centimeters. The calculator converts them to inches for the formula, then shows the result in pounds and kilograms. A 76 cm round pan filled 2.5 cm deep needs about 37 pounds, or 17 kilograms, close to the 30-inch example.
Buying fire glass
Fire glass is often sold in 10-pound jars or bags, so the calculator rounds up to whole jars. Larger bags are cheaper per pound for big pits. Reflective glass, which has a mirrored coating on one side, is used in the same amounts as plain fire glass.
Planning a layered fill
To plan a layered fill, measure the depth from the bottom of the pan to just above the burner and enter it as the lava rock depth, then enter the depth of fire glass you want on top. The calculator works out both materials for the same pan, so you can compare the cost with an all-glass fill before you buy.
Common mistakes
- Measuring the outside of the pit. Use the inside of the burner pan.
- Filling too deep. Too much media can affect the flame and the burner.
- Burying jet burners. Keep media at or below the nozzles.
- Buying the exact amount. Round up to whole jars.
Tips
- Rinse fire glass before use to remove dust.
- Use lava rock underneath to save money.
- Follow your burner manual for depth and media type.
What next
Use this often? Add Fire Glass to your Home screen.
Frequently asked questions
How does a fire glass calculator work?
It multiplies the pan's area in square inches by the depth in inches and by 0.053 to get pounds of fire glass.
How much fire glass for a 30-inch fire pit?
About 37 pounds for 1 inch of depth, or about 75 pounds for 2 inches.
How deep should fire glass be?
Follow your burner manual; propane burners generally take 1–1.5 inches over the burner and natural gas 2–4 inches.
Can I put lava rock under fire glass?
Many people do, filling to about 1/4 inch above the burner with lava rock and topping with glass, if the burner allows mixed media.
How much does lava rock weigh compared with fire glass?
About half as much for the same space.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.