Saved

Press the star next to a tool's name to save it.

All my tools

FCR Calculator

Use this FCR calculator to find the feed conversion ratio and feed efficiency of livestock from feed given and weight gained, with carcass yield and dairy ECM options.

Restored your last values ·

Enter the weight of feed given and the weight gained to get the feed conversion ratio and its inverse, the feed efficiency. Add a carcass yield to see the ratio on a carcass basis. Other modes work out the feed for a gain, the gain for a feed, or the dairy ECM and efficiency.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to work out, fill in the boxes, then press Calculate.

See full result

An FCR calculator finds the feed conversion ratio of animals: how many kilograms of feed it takes to produce one kilogram of weight gain, meat or milk. A lower ratio means more efficient use of feed. Enter the feed given and the weight gained and you get the ratio, its inverse and, if you wish, the ratio on a carcass basis.

How to use the FCR calculator

  1. Choose feed conversion ratio from feed and gain, or another mode.
  2. Enter the weight of feed and the weight gained, in the same unit.
  3. Add a carcass yield if you want the carcass-basis ratio, then press Calculate.

The definition

The Wikipedia article on feed conversion ratio defines FCR as the mass of the input divided by the output, that is, the mass of feed per mass of milk or meat.[1] Feed efficiency is the output divided by the input, the inverse of FCR.[1] The ratio is dimensionless, so the unit does not matter as long as the feed and the output use the same one.[1] For 150 kilograms of feed and 30 kilograms of gain, the FCR is 5 and the efficiency is 0.2.

Live weight and carcass weight

The page says the output may be weight gained, the whole animal at sale or a dressed product, which is why quoted figures can differ so much.[1] Its example for US beef cattle is a live-weight-gain FCR typically above 6, which divided by a carcass yield of 62.2 percent gives a carcass-weight ratio above 10.[1] Enter a yield and the calculator divides the live ratio by it. With a ratio of 5 and a yield of 62.2 percent, the carcass ratio is 8.04, our own calculation using the same method.

Typical values on the page

The page lists values with dates and places, mostly from 2011 to 2015. US broilers had an FCR of about 1.6 on body weight gain at 39 days, and Brazilian broilers 1.8.[1] Farmed Atlantic salmon was around 1, and the page says fish FCR can go below 1.[1] Pigs in the UK and Europe were about 1 as piglets and about 3 at slaughter.[1] For sheep, measured as kilograms of feed dry matter intake per kilogram of live mass gain, lambs were about 4 to 5 on high-concentrate rations.[1] Treat these as examples of scale, not as targets.

Dry matter or as fed

The page says FCR is commonly calculated using feed dry mass and sometimes as fed, and that moisture gives higher ratios.[1] It also says that comparing the FCR of different species may be of little significance unless the feeds are of similar quality.[1] Use the same basis for every figure that you compare.

Dairy: ECM and efficiency

For milk, the page uses energy-corrected milk: 0.327 × milk mass + 12.95 × fat mass + 7.2 × protein mass.[1] Dairy feed efficiency is ECM divided by intake. The page says that a milk-weight efficiency between 1.30 and 1.70 is normal and that less than 1.3 is considered problematic.[1] With 30 kg of milk containing 1.2 kg of fat and 1 kg of protein, the ECM is 9.81 + 15.54 + 7.2 = 32.55 kg. With an intake of 22 kg the efficiency is 1.48.

Age and growth stage

As a rule of thumb, the page says the daily FCR is low for young animals, when relative growth is large, and increases for older animals.[1] Pigs, for example, are most efficient up to about 220 lb and then less so, and lambs have a higher ratio at 8 months than at 4 months.[1] So compare a ratio only with others from the same stage of growth.

What else affects the ratio

The page names genetics, age, feed quality, housing conditions and feed storage as factors, and says FCR is a poor basis for selection, where residual feed intake is recommended because it is independent of size.[1] The page gives no formula for an economic FCR, so this calculator covers weights only. Price and cost per kilogram of gain have to be worked out separately.

Worked examples

A pen of pigs eats 3,500 kilograms of feed while gaining 1,000 kilograms. The FCR is 3.5 and the efficiency is 0.286. A flock of broilers gains 2 kilograms per bird on 3.2 kilograms of feed, so the FCR is 1.6. To raise 5,000 kilograms of gain at an FCR of 3 you need 15,000 kilograms of feed. These are our own examples worked from the definition on the page.{1}

Using the result on the farm

Track the ratio batch by batch and compare each batch with the last, at the same age and on the same feed basis. A rising ratio can point to wasted feed, disease, poor housing or a change in the quality of the feed. A falling ratio means that more of the feed is being turned into gain. Use the feed needed mode to budget the feed for a planned gain, and the gain mode to see what a given amount of feed should produce at your usual ratio.

Common mistakes

  • Mixing weight units. Feed and gain must use the same unit.
  • Comparing different bases. Dry matter and as-fed ratios are not comparable.
  • Using total weight, not gain. The output is the weight gained, not the final weight.

What next

Use this often? Add FCR to your Home screen.

Frequently asked questions

What is an FCR calculator?

A tool that finds the feed conversion ratio, the mass of feed needed per mass of weight gain, meat or milk, and its inverse, feed efficiency.

What is the FCR formula?

FCR = feed input ÷ output, such as weight gain. Feed efficiency is the output divided by the input.

What is a good FCR?

It depends on the species and stage. The page cites about 1.6 for US broilers and around 1 for farmed Atlantic salmon, and a lower ratio is better.

How does carcass yield change the ratio?

Dividing the live-weight ratio by the carcass yield gives the ratio on a carcass basis, so a ratio of 6 at 62.2 percent yield becomes about 9.6.

How is dairy feed efficiency calculated?

As energy-corrected milk divided by intake, where ECM = 0.327 × milk + 12.95 × fat + 7.2 × protein.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools