Saved

Press the star next to a tool's name to save it.

All my tools

EUI Calculator

Use this EUI calculator to find the energy use intensity of a building by dividing its total annual energy use by its floor area, in kBtu per ft² or kWh per m².

Restored your last values ·

Enter the building's total energy use for a year and its floor area. The calculator divides one by the other to give the energy use intensity, and shows it in the other unit as well.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the total energy used in a year and the floor area, then press Find EUI.

See full result

An EUI calculator finds the energy use intensity of a building: the energy it uses in a year for each unit of floor area. Enter the total annual energy use and the floor area, and the calculator divides one by the other. It works in kBtu per square foot, the unit ENERGY STAR uses,[1] or in kWh per square metre. It runs in your browser and nothing you enter is sent anywhere.

How to use the EUI calculator

  1. Choose US or Metric units.
  2. Enter the total annual energy use of the building.
  3. Enter the total floor area.
  4. Press Find EUI.

What EUI means

ENERGY STAR describes EUI as expressing a building's energy use as a function of its size, as energy per square foot per year.[1] It is a way of comparing buildings of different sizes, because a big building uses more energy than a small one, and the EUI removes the effect of the size. It lets you compare buildings and look for ways to save energy, though ENERGY STAR notes that certain property types will always use more energy than others.[1] A lower number means that the building uses less energy for each unit of floor area, and ENERGY STAR says that generally a low EUI signifies good energy performance.[1]

The formula

The formula is simple: the EUI is the total energy the building consumes in one year divided by its floor area.[1] In our worked example, a building in California uses 200,000 kBtu a year and has a floor area of 10,000 square feet, so its EUI is 20 kBtu per square foot per year. Take also a flat of 500 square feet that uses 100,000 kBtu a year. The formula gives 200 kBtu per square foot per year for that flat, and the calculator will show 200, which is the figure that follows from the formula.

Typical values

ENERGY STAR publishes a table of national median EUIs by property type, so look up the figure for your own type of building rather than relying on one typical number.[1] We do not quote a general range, because values differ widely with building type and climate. A fair comparison needs buildings of the same type, in the same climate and with similar use.

Unit conversion

If you choose US units, the calculator also shows the EUI in kilowatt-hours per square metre. One kBtu is 0.293071 kilowatt-hours and one square foot is 0.092903 square metres, so one kBtu per square foot is about 3.1546 kilowatt-hours per square metre. This conversion is our own unit arithmetic. For metric entries, the calculator shows the reverse.

Reading the result

The calculator shows the EUI in the unit that matches your choice, and the same value in the other unit. Compare it with the EUI of the same building in earlier years to see whether changes such as new lighting or better insulation have worked. Compare it with similar buildings in a similar climate to judge whether yours uses more or less energy than its peers.

Finding the data

The annual energy use comes from your utility bills or meter readings. Add the energy from electricity, gas, oil and any other fuel, and convert each to the same unit before you add them. The floor area usually comes from building plans or a property record. Decide whether to count only the heated area or the whole building, and use the same definition each time.

Using EUI to save energy

EUI helps to find opportunities for efficiency. A high figure suggests looking at heating, cooling, lighting and equipment. Our other calculators for LED savings, electricity bills and lumens can help to estimate the effect of a specific change, and you can then run this calculator again with the new yearly energy use.

Why use a per-area figure

Comparing total energy bills is unfair when buildings differ in size, because a large office will always use more than a small shop. Dividing by the floor area gives a number that can be compared across buildings. Landlords, owners and managers use the figure to set targets, to see which buildings need attention first and to track progress over the years. Some cities and programs publish EUI figures for large buildings, and you can enter your own numbers here to see where you stand.

What affects the EUI

The climate, the hours of use, the number of people and the equipment all change the result, as well as the insulation and the heating and cooling systems. A building with long hours or heavy equipment, such as a hospital or a data centre, has a much higher EUI than a warehouse. This is why comparisons only make sense between similar buildings, and why a single EUI value is not a verdict on a building's quality.

Common mistakes

  • Using only the electricity bill. Include gas, oil and any other fuel.
  • Counting a part-year. Use twelve months of data.
  • Mixing floor areas. Use the same definition of area for every building.
  • Mixing units. Keep energy and area in the same system.

What next

Use this often? Add EUI to your Home screen.

Frequently asked questions

What is an EUI calculator?

A tool that divides a building's yearly energy use by its floor area to give its energy use intensity.

How do you calculate EUI?

Total annual energy consumption divided by total floor area.

What is the EUI of a building using 200,000 kBtu a year over 10,000 square feet?

20 kBtu per square foot per year, from our worked example.

What are typical EUI values?

There is no single typical value. ENERGY STAR publishes national median EUIs by property type, so compare buildings of the same type.

Can I use kWh and square metres?

Yes. Choose Metric and enter kWh and m².

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools