An electrolysis calculator uses Faraday's laws to work out how much of a substance is deposited or liberated at an electrode when a current passes through a cell. Enter the current and the time for the mass, or the mass and the current for the time. Choose silver, copper or aluminium, or type the molar mass and the number of electrons for another substance.
How to use the electrolysis calculator
- Choose what you want and the substance.
- Enter the current in amperes and the time in hours, or the mass in grams.
- For another substance, enter its molar mass and the electrons per ion.
- Press Calculate.
Faraday's law
The page on Faraday's laws writes the mass deposited at constant current as m = I t M divided by (F v), where I is the current, t the time, M the molar mass, F the Faraday constant and v the valency, the number of electrons per ion [2]. It also defines the equivalent weight as the molar mass divided by the valency, and the electrochemical equivalent as the mass deposited per unit charge [2]. The calculator uses z for the valency.
The Faraday constant
The Faraday constant is the charge of one mole of electrons, 96,485.33212 coulombs per mole [3]. It equals the elementary charge times the Avogadro constant, both exact since the 2019 redefinition of the SI units [3]. The page notes that a faraday will electrodeposit one mole of silver atoms [3]. The charge is the current times the time, Q = I t, so the moles of electrons are Q divided by F, which is our own rearrangement.
Worked examples
A current of 1 ampere for 1 hour is 3,600 coulombs, which is 0.0373 moles of electrons. That deposits 0.0373 moles of silver, which is 4.025 grams with a molar mass of 107.87 grams per mole [4], or half as many moles of copper, 1.186 grams with 63.55 grams per mole [4]. Aluminium needs three electrons per atom, so 10 amperes for 2 hours deposits 6.71 grams with 26.98 grams per mole [4]. These are our own calculations.
Time and current
Turn the formula round to plan a job. To plate 4.0248 grams of silver with 1 ampere, you need 1 hour. To plate the same mass in half an hour, you need 2 amperes. The relations are t = m F z divided by (I M) and I = m F z divided by (t M), our own rearrangements of the law. The time is given in hours and in seconds.
Choosing the valency
The valency is the number of electrons that each ion takes up at the electrode. Silver ions take one electron, copper(II) ions two and aluminium ions three. For a compound with more than one ion, such as an alloy, each component contributes in proportion to its mass fraction, and the page gives the formula for that case [2]. Enter the valency for the reaction that actually occurs at your electrode.
Current efficiency
Real cells lose some charge to side reactions, such as the release of hydrogen. The calculator assumes that all the charge goes into the reaction you chose. If the efficiency is 90 percent, multiply the mass by 0.9. In industry the efficiency is a key figure, which is why the actual mass is always a little below the calculated one.
Uses
Electrolysis is used to plate metals, refine copper, extract aluminium and make chlorine and sodium hydroxide. The same law lets you size the current and the time of a plating bath, or find how much metal a given charge would deposit.
What happens at the electrodes
In electrolysis, a current from an outside source drives a reaction that would not go by itself. Positive ions move to the cathode, where they take up electrons, and negative ions move to the anode, where they give them up [1]. The page explains that this separates substances, for example a metal from its salt, which is why the process is used to plate and refine metals [1]. The mass that forms is set by the charge that passes, which is why the calculator needs only the current and the time.
Checking a result
As a check, one mole of electrons is 96,485 coulombs, so a current of 1 ampere takes about 26.8 hours to supply it. Divide the molar mass by the valency to get the mass of one equivalent: for copper it is about 31.8 grams, and the calculator's answer for 26.8 ampere-hours of copper should be close to that. Use such a check to catch an error in units.
Sizing a plating job
To plate a part, first find the mass of metal you need from the area and the thickness you want, then use the calculator to find the current and time. A higher current finishes sooner, but too high a current gives a rough, poorly bonded layer, so most baths limit the current per unit of area. Allow for the current efficiency of your bath, which is usually below 100 percent, and add a margin of time.
Common mistakes
- Using minutes or seconds for the time. Enter hours.
- Forgetting the valency. Copper needs two electrons per atom.
- Assuming 100 percent efficiency. Side reactions waste some charge.
- Mixing up grams and moles. The answer is in grams.
What next
Use this often? Add Electrolysis to your Home screen.
Frequently asked questions
What is an electrolysis calculator?
A tool that uses Faraday's laws to find the mass deposited, the time or the current in an electrolysis.
What is Faraday's law formula?
m = I t M ÷ (F z), where F is 96,485 C/mol and z is the electrons per ion.
How much silver does 1 ampere deposit in an hour?
About 4.025 grams, since 3,600 coulombs is 0.0373 moles of electrons and silver takes one.
What is the Faraday constant?
96,485.33212 coulombs per mole of electrons, the charge of one mole of electrons.
What is current efficiency?
The share of the charge that goes into the reaction you want. Multiply the mass by it if it is below 100 percent.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.