Saved

Press the star next to a tool's name to save it.

All my tools

E Bike Range Calculator

Use this e-bike range calculator to estimate how far an electric bike goes on a charge from the battery size, your energy use per mile or kilometre and a reserve.

Restored your last values ·

%

Enter the battery size in watt-hours, or the voltage and the amp-hours. Enter how much energy your e-bike uses for each mile or kilometre, from your past rides. You can keep a percentage of the battery in reserve. The range is the usable energy divided by the energy used per mile or kilometre.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the battery and your energy use, then press Estimate range.

See full result

An e-bike range calculator estimates how far an electric bike can go on one battery charge. Enter the battery energy, or its voltage and amp-hours, and how much energy your bike uses for each mile or kilometre, and the calculator gives the range, with an optional reserve left in the battery. It runs in your browser and nothing you enter is sent anywhere.

How far an e-bike goes

Wikipedia's article on e-bikes says the battery usually lasts for about 40 to 120 kilometres, or 25 to 75 miles, per charge, depending on the power level. It notes that manufacturers' claims range from roughly 20 kilometres with continuous strong assist on steep hills to about 140 kilometres with intermittent gentle assist on slight hills. The range depends on your battery and on how hard the motor works, so the same bike can go much further on a flat road with low assist than on a hilly route in the top assist mode.

How to use the e-bike range calculator

  1. Choose US (miles) or Metric (kilometres).
  2. Enter the battery energy in watt-hours, or the voltage and amp-hours if you do not know the watt-hours.
  3. Enter the energy used per mile or kilometre.
  4. Optionally enter a reserve to keep in the battery.
  5. Press Estimate range.

Watt-hours

A watt-hour is a unit of energy: one watt of power for one hour. Wikipedia's article on the kilowatt-hour gives 1 kilowatt-hour as 1,000 watt-hours, which is 3.6 megajoules. For a battery, the energy in watt-hours is its voltage times its amp-hours. The article makes the related point that you must use the battery's own voltage, such as 3.7 volts for a lithium-ion cell, when converting between milliamp-hours and watt-hours. A 48 volt battery of 10 amp-hours holds 480 watt-hours.

The formula

The usable energy is the battery energy less the reserve you want to keep. The range is the usable energy divided by the energy used per mile or kilometre. The calculator shows the range in your chosen unit and also in the other one, converting with 1 mile as 1.609344 kilometres.

Worked example

A 48 volt, 10 amp-hour battery holds 480 watt-hours. You want to keep 10 percent in reserve, so the usable energy is 432 watt-hours. Your bike uses about 20 watt-hours per mile in the assist mode you plan to use. The range is 432 divided by 20, which is 21.6 miles, or 34.8 kilometres. In metric, a 500 watt-hour battery with a use of 12 watt-hours per kilometre and no reserve gives 500 divided by 12, which is 41.7 kilometres, or 25.9 miles.

Finding your energy use

The energy use is the figure that matters most, and it is yours alone. Many e-bike displays and apps show the battery level or the watt-hours used. Take a ride that is like your plan, note the distance and the battery used, and divide the energy used by the distance. For example, if a 10 mile ride uses 200 watt-hours, the use is 20 watt-hours per mile. Do this for the assist levels you use.

Why the reserve matters

Batteries lose some of their capacity as they age, and cold weather makes them give less energy. A reserve gives you a margin for headwinds, extra hills and a detour. Keeping 10 to 20 percent in reserve also means you never ride the battery to empty, and you can plan to get home by pedalling even if the battery fails.

Assist limits

The article also describes the limits on assist in different places. In the EU, a pedelec's assist only works while you pedal, cuts out at 25 kilometres per hour and is limited to 250 watts of continuous rated power. In the United States, the classes of e-bike have a maximum continuous motor power of 750 watts. A bike with a more powerful motor can drain the battery faster at the same speed.

Where the energy goes

An e-bike uses energy to overcome air drag, rolling resistance and gravity, just as a bicycle does, and the motor and your legs share the work. A higher assist level makes the motor supply more of it, so the battery is used faster. In the same way, riding faster, carrying more weight or climbing hills raises the energy used for each mile. That is why the best way to get a good energy-use figure is to ride a route like the one you plan.

Charging and battery care

The Wikipedia article says that most e-bikes use lithium-ion polymer batteries, with lead-acid, nickel-cadmium and nickel-metal hydride used in some. It notes that a typical Chinese e-bike from 2007 took about eight hours to charge for a range of about 40 to 48 kilometres at around 20 kilometres per hour. Modern batteries differ, so follow the maker's advice on charging, storage and temperature, since looking after the battery is the best way to keep its range.

Planning a trip

For a longer trip, use the range as an upper limit and plan charging stops, or carry a second battery. Allow for the slowest part of the route, such as a long climb, and for a headwind on the way home. If the range is only just enough, use a lower assist level at the start, and save the higher levels for the hills. Check the weather, because cold slows the chemistry in a battery.

Common mistakes

  • Using the maker's range claim. It depends on conditions that may not match yours.
  • Mixing up amp-hours and watt-hours. Multiply amp-hours by the voltage to get watt-hours.
  • Using all of the battery. Keep a reserve.
  • Using one energy use for all rides. Hills and assist levels change it.

What next

Use this often? Add E Bike Range to your Home screen.

Frequently asked questions

What is an e-bike range calculator?

A tool that estimates how far an electric bike can go on one charge from the battery energy and the energy it uses per mile or kilometre.

How do you calculate e-bike range?

Divide the usable battery energy in watt-hours by the energy used per mile or kilometre.

How many watt-hours is my e-bike battery?

Multiply the battery voltage by its amp-hours. A 48 volt, 10 amp-hour battery is 480 watt-hours.

How far does an e-bike usually go?

Wikipedia says about 40 to 120 kilometres (25 to 75 miles) per charge, depending on the power level.

Why keep a reserve in the battery?

Headwinds, hills, cold and an ageing battery all reduce the range, so a reserve gives a margin.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters