A dunk calculator tells you how high you must jump to dunk a basketball, and how much energy and time that takes. Choose the hoop height, enter your weight and your standing reach, and the calculator gives the minimum vertical leap, the jumping energy, the take-off speed and the hang time. It uses standard motion and energy formulas, and it runs in your browser.
How to use the dunk calculator
- Choose US or metric units.
- Choose the hoop height. The standard height is 10 feet, or 3.05 meters, and lower hoops may be used in youth play. [2] You can also enter a custom height.
- Enter your body weight and your standing reach.
- If you want, enter the size of your palm, which is how much of your hand can be above the rim.
- Press Work out the jump.
The formulas
The minimum vertical leap is the hoop height minus your standing reach, plus the size of your palm. Three more formulas follow from it. The jumping energy is your mass times the acceleration of gravity times the leap, which is the gain in gravitational potential energy. [3] The take-off speed is the square root of twice the gravity times the leap, which comes from the constant-acceleration equation with the speed falling to zero at the top. [1] The hang time is the square root of eight times the leap divided by the gravity, which is the time to rise and fall back; this last step is our own working from the same equation. The calculator uses 9.80665 meters per second squared for gravity. [4]
Hoop heights
The standard rim is 10 feet, or 3.05 meters, above the floor, and basketball sources note that youth competition may differ. [2] Younger players often use lower hoops, such as 7, 8 or 9 feet, but the exact height depends on the league, so check yours. A lower hoop needs a smaller jump, so it is a good way to see how a player's skill progresses. If your hoop is a different height, choose the custom option and enter its height in the same units as your reach.
An example
A player with a standing reach of 100 inches, which is about 254 centimeters, and a weight of 180 pounds, which is about 82 kilograms, wants to dunk on a standard hoop at 120 inches. The minimum vertical leap is 20 inches, or 0.508 meters. The take-off speed is the square root of twice 9.81 times 0.508, which is about 3.16 meters per second. The jumping energy is about 82 times 9.81 times 0.508, which is about 407 joules. The hang time is about 0.64 seconds, which is the time that the player stays above the height needed. These figures are our own worked example of the formulas.
What the results mean
The vertical leap is the number to aim for, and you can compare it with your own best jump, which you can measure by standing next to a wall, marking your reach, and then marking the highest point you can touch with a jump. The energy shows how much work the jump takes, and the speed is how fast you must leave the ground. The hang time is a very short moment, which is why a dunk looks quick and why timing matters as much as height.
Why the palm matters
You do not need to get your whole hand above the rim, since the ball only has to be pushed down through the hoop, so the calculator lets you add the size of your palm. A bigger palm means that you can reach the rim with a slightly smaller jump. If you leave it out, the result is the jump needed for your fingertips to touch the rim, which is a safe, higher figure.
Measuring your standing reach
To measure your standing reach, stand with your back or your side against a wall, with your feet flat on the floor. Raise one arm as high as you can and mark the highest point that your fingertips touch. Measure from the floor to the mark. This number, and not your height, is what you enter. Do it a few times and take the highest figure, and ask a friend to help you read the mark.
Measuring your vertical jump
To compare the result with your own jump, mark your standing reach on the wall as before. Then jump as high as you can and touch the wall at the top of the jump, marking the point. The difference between the two marks is your vertical jump. If your best jump is close to the minimum vertical leap that the calculator gives, you may be able to dunk with a good run-up. If it is far below, you can see how much you would need to gain.
Training for a higher jump
A higher jump comes from stronger legs and hips, faster muscles, a good technique and enough rest. Many players add strength training, jumps with their own body weight, and mobility work to their routine, and they build up gradually over weeks and months. A coach or a trainer can plan this safely, and a medical check is wise if you have an injury or a health condition. The calculator gives you a target and cannot say how long it will take to reach.
Common mistakes
- Mixing up reach and height. Standing reach is how high you can touch, not how tall you are.
- Using the wrong units. Match the box to the units chosen.
- Ignoring the approach run. Real dunks use a run-up, which adds speed.
- Skipping warm-up. Jump training should be built up slowly.
What next
Use this often? Add Dunk to your Home screen.
Frequently asked questions
What is a dunk calculator?
A tool that works out how high you must jump to dunk a basketball, from the hoop height and your standing reach.
How is the vertical leap needed worked out?
Hoop height minus your standing reach, plus your palm size.
What is the standard hoop height?
10 feet, or about 3.05 meters, for players in seventh grade and above.
What is the hang time?
The time spent in the air above the height needed, worked out as the square root of eight times the leap divided by gravity.
What is standing reach?
How high you can touch with your arm raised while standing flat on your feet.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.