Saved

Press the star next to a tool's name to save it.

All my tools

Drone Motor Calculator

Use this drone motor calculator to find the thrust each motor must give, from the weight of the body, battery and equipment, the thrust-to-weight ratio and the number of motors.

Restored your last values ·

: 1

Choose US or metric units. Enter the weight of the body, the battery and any equipment, the thrust-to-weight ratio you want and the number of motors. You get the thrust that each motor must give, and you can check a motor's rating against it.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the weight of the drone, the ratio and the number of motors, then press Calculate.

See full result

A drone motor calculator tells you how much thrust each motor must give for the drone to fly the way you want. Add up the weight of the body, the battery and the equipment, choose a thrust-to-weight ratio and the number of motors, and it gives the thrust per motor.

How to use the drone motor calculator

  1. Choose US or metric units.
  2. Enter the weight of the body, the battery and any equipment.
  3. Enter the thrust-to-weight ratio and the number of motors.
  4. Add a motor rating to check it, then press Calculate.

The three steps

The calculator multiplies the weight of the drone by the thrust-to-weight ratio to get the total thrust, then divides by the number of motors. The weight is split into three components, the drone, the battery and the equipment such as a camera, and the tool adds them. These steps are our own working from the definition of the ratio.

Thrust-to-weight ratio

Thrust-to-weight ratio is the thrust of the motors divided by the weight [1]. A vehicle that takes off without the help of lift needs a ratio above 1 [1]. In hover the thrust equals the weight [2], so a ratio of 1 is just enough to hover, which is our own reading for drones. In practice, you need more than that, so that the drone can climb and recover.

Choosing the ratio

As rough rules of thumb of our own, use 2 to 1 for normal flying, at which the drone hovers at about half throttle, 4 to 1 or 5 to 1 for FPV and racing, and up to 7 to 1 for extreme aerobatics. They are not from a published standard. The tool says which of these ranges your ratio falls in. A heavy camera drone for smooth video is happy near 2 to 1, whereas a racing quad wants much more.

A worked example

A drone with a 500 gram body, a 150 gram battery and 50 grams of equipment weighs 700 grams. At a ratio of 3 to 1, the total thrust is 2,100 grams, and with 4 motors each must give 525 grams. A second case needs 536 grams per motor, which follows from a total weight of 715 grams: 715 times 3 divided by 4 is 536.25.

Grams and newtons

Motor makers quote thrust in grams, or sometimes kilograms, because that is how a test stand reads it. A force in grams-force is converted to newtons by multiplying by 0.00980665, so 525 grams of thrust is 5.15 newtons. The conversion is standard physics and our own working, and the tool gives the newtons beside the grams so that you can use either.

US units

In US mode, you enter the weights in ounces and get the answer in ounces, with the grams shown beside it. One ounce is 28.35 grams. Entering 17.6, 5.3 and 1.8 ounces gives the same drone as the 700 gram example, to the accuracy of the rounding. If your data sheet is in grams, switch to metric: the logic is the same in both.

Checking a motor

If you give the maximum thrust of one motor, the tool compares it with the thrust needed. A motor of 600 grams against a need of 536 grams meets the need with about 12 percent to spare, and the ratio that it would give for this weight is 3.36 to 1. A motor below the need falls short, and the tool tells you by how much and what ratio you would get instead.

Static thrust and real flight

The thrust on a data sheet is static thrust, measured on a stand with a given propeller and battery voltage. In flight, the thrust changes with forward speed, with the air density and with the battery sag. In forward flight the rotor power rises with speed [2], which this tool does not model, and it takes no motor KV, current, propeller size or efficiency either. Take the result as the minimum, and choose a motor with a margin.

What it does not cover

The tool does not calculate the flight time, the battery capacity, the current draw or the propeller size. Those depend on other things, such as the efficiency of the motor, the voltage and the pitch of the propeller. For the battery, a separate calculator is better. This one answers a single question: how much thrust should each motor be able to give?

Using the calculator

Weigh the frame, motors, propellers and landing gear for the body. Weigh the battery and the camera on their own, and enter them in their boxes. Choose the ratio from the list of uses, and enter the number of motors. Read the thrust per motor, and look for motors whose rated thrust at your voltage is higher. Then test the drone with a small margin before flying it.

Margin for real flying

Plan for a margin above the thrust that the sums give. Batteries lose voltage as they empty, propellers wear and get bent, and a gust of wind can ask for a burst of power. A drone that has just enough thrust for a smooth hover has none left for climbing out of a dive or for carrying an extra load. If the result puts a motor close to its limit, choose a stronger motor or reduce the weight, and make sure the drone is still easy to control at the lower throttle that the extra power allows.

Common mistakes

  • Forgetting the battery or camera. They are part of the weight.
  • Using a ratio of 1. The drone could barely leave the ground.
  • Mixing grams and ounces. Choose one unit.
  • Using peak thrust at the wrong voltage. Check the data sheet.

What next

Use this often? Add Drone Motor to your Home screen.

Frequently asked questions

What is a drone motor calculator?

A tool that works out the thrust each motor must give, from the total weight, the thrust-to-weight ratio and the number of motors.

How do you calculate thrust per motor?

Multiply the total weight by the thrust-to-weight ratio, then divide by the number of motors.

What thrust-to-weight ratio does a drone need?

As rough rules of thumb, 2 to 1 for normal flying, 4 to 1 or 5 to 1 for FPV and racing, and up to 7 to 1 for extreme aerobatics.

How many newtons is a gram of thrust?

A gram-force is 0.00980665 newtons, so 525 grams of thrust is about 5.15 newtons.

Does the calculator choose the motor, propeller or battery?

No. It gives the thrust needed per motor only; the motor data sheet and the propeller decide the rest.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools