This cubic feet to pounds converter works out how much a volume of material weighs. Pick the material, enter the cubic feet, and it gives the weight in pounds. It also runs the other way: enter a weight and it tells you how many cubic feet that material fills.
There is no single conversion, because cubic feet measure space and pounds measure weight. The link between them is density, the pounds in each cubic foot, so the converter has densities for water, gravels, stones and a custom option.
How to use the cubic feet to pounds converter
- Choose US units (cubic feet, pounds) or metric (cubic meters, kilograms).
- Choose volume to weight or weight to volume.
- Pick the material, or choose Custom and enter your own density.
- Enter the amount and press Calculate.
The formula
Pounds = cubic feet × density in pounds per cubic foot
Cubic feet = pounds ÷ density
The density is the part that changes. Water is about 1 gram per cubic centimeter, which Wikipedia gives as roughly 62 pounds per cubic foot, and the exact figure is 62.43. Stone and gravel are much heavier, so a cubic foot of them can weigh over 100 pounds.
Densities built in
- Water: 62.4 pounds per cubic foot.
- Lava rock: 37.0 pounds per cubic foot, from 0.5 tons per cubic yard.
- Eastern Sunrise stone: 66.7. Crimson stone: 81.5.
- Rock (#57 and #89): 88.9. Lime rock: 92.6.
- River rock and granite: 98.1. Marble: 100.0.
- Building stone and flagstone: 133, the stacked figure a landscaping supplier uses.
The gravel and stone figures come from a landscape supplier's tons-per-cubic-yard table. A cubic yard is 27 cubic feet, so each value is the tons per cubic yard times 2,000 pounds, divided by 27.
Worked examples
How much do 10 cubic feet of water weigh? Multiply 10 by 62.43 and you get 624.28 pounds, a little over 0.31 tons. Ten cubic feet of river rock at 98.1 pounds per cubic foot weighs 981.48 pounds.
Going the other way, a truck can carry 1,000 pounds of #57 rock. At 88.9 pounds per cubic foot that fills 11.25 cubic feet. Five cubic feet of the same rock weighs 444.44 pounds.
In metric, 2 cubic meters equals 70.63 cubic feet, and the converter switches the answer to kilograms and cubic meters when you choose metric.
Why building stone shows 133 pounds
Solid unbroken stone is heavier, around 145 to 160 pounds per cubic foot, according to the same supplier. Because stone piled in a yard has gaps, the supplier uses 133 pounds per cubic foot, or about 15 cubic feet per ton, so you do not under-order. That is the figure the converter uses for building stone and flagstone.
Using your own density
Choose Custom for any other material. In US units enter pounds per cubic foot, and in metric enter kilograms per cubic meter. The calculator accepts values from 1 to 1,500 pounds per cubic foot. Check the density on the supplier's data sheet, because moisture, compaction and size all change it. Wet sand, for example, weighs more than dry sand.
Work out the volume first
Before you can convert to pounds you need the volume in cubic feet. For a rectangular space, multiply length by width by depth, all in feet. Depth is usually given in inches, so divide it by 12 first: a bed 8 feet long, 4 feet wide and 6 inches deep holds 8 × 4 × 0.5 = 16 cubic feet. For a cylinder, such as a round planter, multiply the area of the circle by the depth. The supplier's table lists the same relationship: one cubic yard is 27 cubic feet, and a half cubic foot bag of gravel covers about 2.37 square feet at a depth of 2.5 inches.
Cubic feet, cubic yards and cubic meters
Landscape materials are often sold by the cubic yard, which is 27 cubic feet. To go from cubic yards to cubic feet, multiply by 27. A cubic meter is about 35.31 cubic feet, so two cubic meters is 70.63 cubic feet. The converter handles the metric switch for you: it takes cubic meters and kilograms, and the density box accepts kilograms per cubic meter.
Weight planning for trucks and trailers
Weight matters most when you haul material yourself. A pickup bed can hold more cubic feet of gravel than it can safely carry, because stone is heavy. Work out the pounds for your load, then compare it with the payload rating in your vehicle's manual. If the load is too heavy, make several trips or ask the supplier to deliver. Wet material weighs more than dry, so leave a safety margin when the pile has been rained on.
A raised bed example
You are filling a raised bed that holds 16 cubic feet with river rock as a base layer. Multiply 16 by 98.1 pounds per cubic foot and the layer weighs about 1,570 pounds, nearly 0.8 ton. That is far more than most people expect from a small bed, so it is worth knowing before the delivery arrives.
Common mistakes
- Using the density of dry material for a wet pile, which can understate the weight.
- Mixing up cubic feet and cubic yards, a 27-fold difference.
- Forgetting that loose, piled material fills more space than the solid rock it came from.
Related conversions
For stone sold by the yard, the cubic yards to tons converter goes straight to tons. To estimate how much gravel a project needs, use the gravel calculator, and for liquids by the gallon try the gallons to pounds converter. Results are estimates and real loads vary, so confirm weights with your supplier before you order.
What next
Use this often? Add Cubic Feet t to your Home screen.
Frequently asked questions
How many pounds are in a cubic foot?
It depends on the material. Water is about 62.4 pounds per cubic foot, river rock about 98.1 and stacked building stone 133.
How do I use a cubic feet to pounds converter?
Pick the material, enter the cubic feet and the converter multiplies by that material's density. Ten cubic feet of water is 624.28 pounds.
How much does a cubic foot of water weigh?
About 62.4 pounds. Water is roughly 1 gram per cubic centimeter, which is about 62 pounds per cubic foot.
How do I convert pounds back to cubic feet?
Divide the weight by the density. A 1,000-pound load of #57 rock at 88.9 pounds per cubic foot fills about 11.25 cubic feet.
Can I use my own material's density?
Yes. Choose Custom and enter pounds per cubic foot (or kilograms per cubic meter in metric) from the supplier's data sheet.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.