Saved

Press the star next to a tool's name to save it.

All my tools

Cubic Cell Calculator

Use this cubic cell calculator to find the edge length or atomic radius, atoms per cell, coordination number, packing factor and density of a simple, BCC or FCC crystal.

Restored your last values ·

Choose simple, body-centred or face-centred cubic, and enter either the atomic radius or the cell edge in picometres. You get the other, the atoms per cell, the coordination number, the packing factor and, with a molar mass, the density.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the structure and enter the radius or the edge, then press Calculate.

See full result

A cubic cell calculator works out the geometry of a cubic crystal. Choose simple, body-centred or face-centred cubic, enter the atomic radius or the edge length, and it gives the other, the number of atoms per cell, the coordination number, the packing factor and, with the molar mass, the density of the metal.

How to use the cubic cell calculator

  1. Choose the structure and what you know.
  2. Enter the atomic radius or the edge length in picometres, and optionally the molar mass.
  3. Press Calculate.

Atoms per cell

The three cubic lattices hold different numbers of atoms in each unit cell. A simple cubic cell contains one atom, since each of the eight corners is shared by eight cells, one-eighth times eight [1]. A body-centred cell has the equivalent of two atoms [2], and a face-centred cell has four [1]. The calculator reports this number as Z.

Coordination number

The coordination number is the number of nearest neighbours of an atom. In the simple cubic lattice it is 6, in the body-centred lattice 8 and in the face-centred lattice 12 [1]. The page on close packing also gives 12 for the face-centred and hexagonal close-packed arrangements [3].

Packing factor

The atomic packing factor is the fraction of the cell volume filled by the atoms, N × (4/3)πr³ divided by the cell volume [2]. It is about 0.524 for simple cubic, 0.680 for body-centred and 0.740 for face-centred [1]. The page gives the exact forms π/6, π√3/8 and π/(3√2) [2]. The face-centred value is the highest possible for equal spheres, and it equals that of hexagonal close packing [3].

Radius and edge

Where the atoms touch decides the relation. In simple cubic the atoms touch along an edge, so a = 2r [2]. In the body-centred cell the atoms touch along the body diagonal, whose length is a√3, so a√3 = 4r and a = 4r ÷ √3 [2]. In the face-centred cell the atoms touch along a face diagonal, so a = 2√2 r, which agrees with the volume (2r√2)³ used by the page for the packing factor [2]. The calculator uses these relations in either direction.

Density

The density of the crystal is the mass of the atoms in a cell divided by its volume, ρ = Z × M ÷ (a³ × N_A), where M is the molar mass and N_A is the Avogadro constant. The pages that we read do not state this formula, so it is our own working from the definition of density. Enter the molar mass to get it.

A worked example

Copper is face-centred cubic with an edge of about 361.5 pm and a molar mass of 63.55 g/mol. The cell holds 4 atoms, so the density is 4 × 63.55 ÷ (6.022 × 10²³ × (3.615 × 10⁻⁸ cm)³), about 8.93 g/cm³. The radius is 361.5 ÷ (2√2), about 127.8 pm. For a body-centred metal with r = 100 pm, the edge is 230.9 pm. These figures are our own calculations.

Using the calculator

If you are given the radius of an atom, choose the structure and enter it to get the edge. If you have the edge from X-ray diffraction, enter it to get the radius. Add the molar mass to get the density and compare it with the measured value, which is a classic check that the structure has been identified correctly.

Reading a unit cell picture

Look at where the atoms touch. In a simple cubic cell they touch along the edges, so the edge is two radii. In a body-centred cell the corner atoms do not touch each other but all touch the atom at the centre, so the body diagonal holds four radii. In a face-centred cell the atoms touch across each face, so the face diagonal holds four radii. Drawing the line through the touching atoms and applying Pythagoras reproduces each relation in the calculator.

Why packing matters

The packing factor tells you how much of the crystal is empty space. Simple cubic is very open, which is why few metals use it. Body-centred cubic is more compact, and face-centred cubic is the densest packing of equal spheres. Metals such as copper, aluminium and gold are face-centred, while iron at room temperature and the alkali metals are body-centred. The density from the cell can be compared with a table to check that an assignment is right.

Units

Enter lengths in picometres, which is 10⁻¹² metres. A distance of 361.5 pm is 3.615 ångström or 0.3615 nanometres. The density is shown in grams per cubic centimetre.

Practice problems

Try iron, which is body-centred cubic with an edge of about 286.6 pm and a molar mass of 55.85 g/mol. The cell holds two atoms, so the density comes to about 7.87 g/cm³, close to the measured value. Then try sodium and aluminium, and compare the packing factors of their structures with the densities you find.

Common mistakes

  • Mixing up the relation between a and r. Each structure has its own.
  • Using the wrong units. Enter picometres.
  • Forgetting the atoms per cell in the density. It is 1, 2 or 4.
  • Assuming all metals are close packed. Body-centred metals are less dense.

What next

Use this often? Add Cubic Cell to your Home screen.

Frequently asked questions

What is a cubic cell calculator?

A tool that gives the geometry and density of a simple, body-centred or face-centred cubic unit cell.

How many atoms are in an FCC cell?

Four. A BCC cell holds two and a simple cubic cell holds one.

What is the relation between edge and radius in FCC?

a = 2√2 r.

What is the packing factor of FCC?

π/(3√2), about 0.74, the highest for equal spheres.

How do I find the density of a metal from its unit cell?

ρ = Z × M ÷ (a³ × N_A), where Z is the atoms per cell and M the molar mass.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools