Saved

Press the star next to a tool's name to save it.

All my tools

Concrete Stairs Calculator

Use this concrete stairs calculator to find the number of steps, the exact riser, the total run and the cubic yards of concrete for solid steps, in US or metric units.

Restored your last values ·

Choose US or metric units. Enter the total rise, the riser height you want, the tread depth and the width. The calculator finds the number of steps, adjusts the riser to fit, and works out the concrete for solid steps.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the rise, the riser, the tread and the width, then press Calculate.

See full result

A concrete stairs calculator works out how many steps a flight needs and how much concrete the solid steps take. Enter the total rise, the riser height you want, the tread depth and the width, and it gives the number of steps, the exact riser, the total run and the volume of concrete in cubic yards or cubic metres.

How to use the concrete stairs calculator

  1. Choose US or metric units.
  2. Enter the total rise, the riser height, the tread depth and the width.
  3. Add a waste allowance if you wish.
  4. Press Calculate.

Rise, run and number of steps

The total rise of a flight is the height between the floors, or landings, that it spans. If there are N steps, the total rise equals N times the rise of each step [1]. The number of steps is always the number of risers, not the number of treads [1]. The calculator divides the total rise by your riser height, rounds to the nearest whole number of steps, and then recomputes the riser so that the steps fit the rise exactly.

Total run

The total run, or total going, of the stairs is N − 1 times the going, since the top step meets the upper floor and has no tread of its own [1]. With 6 steps of 11 inches the flight has 5 treads and a total run of 55 inches. The calculator reports the run so that you can check that you have room for the flight.

Concrete for solid steps

For solid steps poured on the ground, each tread sits on a block of concrete that is as high as the steps below it. The first tread is one riser high, the second two risers, and so on up to N − 1 risers. The volume is the width times the tread depth times the riser times the sum of 1 + 2 + … + (N − 1), which is N (N − 1) ÷ 2. The pages that we read do not give a volume formula, so this one is our own working from the geometry.

A worked example

A flight with a total rise of 42 inches and a riser of 7 inches has 6 steps. With treads of 11 inches and a width of 48 inches, the sum is 15, and the volume is 48 × 11 × 7 × 15 = 55,440 cubic inches, which is 32.08 cubic feet or 1.19 cubic yards. Add 10 percent for waste and the order is about 1.3 cubic yards. A cubic yard is 27 cubic feet, or 46,656 cubic inches. These figures are our own calculations.

Waste and extras

Concrete is lost in forms that are not perfectly square, in spillage and in the footing and landing, which this calculator does not include. A waste allowance of 5 to 10 percent is common. If the steps have a landing or a footing, work out their volumes separately with a slab or footing calculation and add them. Order from the supplier by the cubic yard or cubic metre.

Choosing the riser and tread

Comfortable stairs have a riser and a tread that work together, and building codes set limits on both. The pages that we read do not give the code limits, so the calculator does not check them. Look up the limits for your area before you build, and make all risers in a flight equal, since unequal steps cause trips.

Metric units

In metric mode, enter centimetres. A flight with a rise of 107 centimetres and a riser of 18 centimetres has 6 steps. The volume comes out in cubic metres. The same steps, treads and widths give the same concrete in either set of units, apart from rounding.

Before you pour

Check the forms are level and braced, since wet concrete is heavy. Plan the pour so that it is finished in one go. Cure the concrete by keeping it damp. Use this calculator for the quantity only, and have a plan from a qualified person if the stairs are part of a structure.

Adjusting the design

If the riser the calculator gives is not what you want, change the riser height you enter and watch the number of steps change. A smaller riser gives more steps and a longer run, and needs more concrete. A larger riser shortens the flight but makes it steeper. Because the calculator rounds the number of steps and then recomputes the riser, the riser you get can differ slightly from the one you typed, so read the result line.

Checking the quantity

As a rough check, a flight of five treads that are 4 feet wide holds about one and a quarter cubic yards of solid concrete. Hollow or slab-supported stairs use far less, so compare your design with the solid model before you order. Ask the supplier about minimum loads for small pours.

Common mistakes

  • Counting treads as steps. The number of steps is the number of risers.
  • Forgetting the total run. The run is one tread shorter than the steps.
  • Ignoring the footing. Add it separately.
  • Not allowing for waste. Order a little extra concrete.

What next

Use this often? Add Concrete Sta to your Home screen.

Frequently asked questions

What is a concrete stairs calculator?

A tool that works out the steps and the concrete volume for a flight of solid concrete stairs.

How do I find the number of steps?

Divide the total rise by the riser height and round to a whole number. The number of steps equals the number of risers.

What is the total run of stairs?

N − 1 times the tread depth, where N is the number of steps.

How many cubic feet are in a cubic yard?

27.

Does the calculator include a landing or footing?

No. Add their volumes separately.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools