Saved

Press the star next to a tool's name to save it.

All my tools

Combustion Reaction Calculator

Use this combustion reaction calculator to balance the complete burning of a hydrocarbon or alcohol, and find the oxygen needed and the CO₂ and water produced for a mass.

Restored your last values ·

Enter the number of carbon, hydrogen and (if any) oxygen atoms in the fuel. You get the balanced equation for complete combustion. Add a mass to get the oxygen needed and the carbon dioxide and water produced.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the atoms in the fuel formula, then press Calculate.

See full result

A combustion reaction calculator balances the equation for the complete burning of a hydrocarbon or an alcohol, and works out the oxygen needed and the carbon dioxide and water produced. Enter the carbon, hydrogen and oxygen atoms in the fuel, and optionally a mass, and it does the rest.

How to use the combustion reaction calculator

  1. Enter the carbon and hydrogen atoms of the fuel, and oxygen if it has any.
  2. Optionally enter a mass of fuel in grams.
  3. Press Calculate.

The general equation

In complete combustion a hydrocarbon burns in oxygen to give carbon dioxide and water. For a fuel CxHy the balanced equation is CxHy + (x + y/4) O₂ → x CO₂ + (y/2) H₂O [1]. The page prints the formula with the subscripts garbled, and this is the intended form. The same balance extends to a fuel with z oxygen atoms, which needs x + y/4 − z/2 moles of oxygen, our own extension of the equation.

Worked equations

For methane the page gives CH₄ + 2 O₂ → CO₂ + 2 H₂O [1], and for propane C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O [2]. The page also shows ethane as 2 C₂H₆ + 7 O₂ → 4 CO₂ + 6 H₂O and butane as 2 C₄H₁₀ + 13 O₂ → 8 CO₂ + 10 H₂O [2]. When the oxygen needed is a fraction, the calculator doubles or quadruples every coefficient to keep them whole, as in these examples. Octane, C₈H₁₈, gives 2 C₈H₁₈ + 25 O₂ → 16 CO₂ + 18 H₂O.

Mole ratios

The coefficients are mole ratios. The page puts it this way for methane: for every mole of methane burned, two moles of oxygen are used, and one mole of carbon dioxide and two moles of water are produced [2]. To go from a mass, convert to moles first with n = m ÷ M [2], then multiply by the ratio, then convert back to a mass.

A mass example

The page works through 120 grams of propane, whose molar mass is 44.09 g/mol, and finds 196 grams of water, using four moles of water per mole of propane and a molar mass of 18.02 for water [2]. Enter 3 carbons, 8 hydrogens and 120 grams to see this and the oxygen and carbon dioxide as well. The mass of oxygen and carbon dioxide are our own working with standard molar masses.

Air instead of oxygen

In air each mole of oxygen comes with about 3.71 moles of nitrogen, and the theoretical air is the amount needed for complete combustion [1]. So burning in air needs about 4.71 moles of air for each mole of oxygen. The calculator gives the oxygen, which you can scale to air with this ratio.

Fuels with oxygen

Alcohols such as methanol and ethanol already contain oxygen, so they need less from the air. Enter the oxygen atoms to include them: ethanol, C₂H₆O, gives C₂H₆O + 3 O₂ → 2 CO₂ + 3 H₂O. If a formula has so much oxygen that the balance needs a negative amount, the calculator tells you that it cannot burn in this way.

Limits

Real flames often burn incompletely, giving carbon monoxide, soot or unburned fuel, especially when air is short. The calculator is for the idealised complete case, which gives the largest amount of heat and of carbon dioxide. Use it to check oxygen demand, to compare fuels by their carbon dioxide output, and to practise balancing equations.

Balancing by hand

To check the calculator, balance a combustion equation in the order carbon, hydrogen, oxygen. Give the fuel a coefficient of one, put x on carbon dioxide so that carbon balances, put y/2 on water so that hydrogen balances, and finally count the oxygen atoms on the right to find the oxygen needed on the left. If the count is odd, double everything. Doing it once for butane shows why the coefficients 2, 13, 8 and 10 appear.

Comparing fuels

The equation also shows why some fuels produce more carbon dioxide per unit of energy than others. Methane gives two waters for each carbon dioxide, while a long chain gives only about one water per carbon dioxide. Because the hydrogen burns to water and carries a lot of heat, hydrogen-rich fuels release less carbon dioxide for the same heat. Use the mass mode to compare the carbon dioxide from equal masses of different fuels.

Checking your answer

The mass of the reactants must equal the mass of the products. Add the fuel and the oxygen reported for your sample and compare with the carbon dioxide and water. The two totals agree to the digits shown, which confirms the balance.

Practice problems

Try the fuels you meet every day: methane for the kitchen hob, propane for a barbecue, butane in a lighter and ethanol in a camping stove. For each one, enter the atoms, read the balanced equation and then enter a mass of 100 grams to compare how much oxygen is needed. You will see that the heavier the carbon content, the more oxygen each gram of fuel needs.

Common mistakes

  • Leaving the equation unbalanced. Check that each element has the same atoms on both sides.
  • Forgetting to double for halves. Fractions are cleared by multiplying all the coefficients.
  • Mixing atoms and grams. The formula needs atom counts, the mass is optional.
  • Assuming complete burning in a real engine. Real combustion is rarely complete.

What next

Use this often? Add Combustion R to your Home screen.

Frequently asked questions

What is a combustion reaction calculator?

A tool that balances the equation for the complete burning of a fuel and gives the oxygen needed and the products formed.

What is the equation for complete combustion of a hydrocarbon?

CxHy + (x + y/4) O₂ → x CO₂ + (y/2) H₂O.

What is the combustion of propane?

C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O. 120 g of propane gives about 196 g of water.

How much oxygen is needed?

(x + y/4) moles per mole of hydrocarbon, minus z/2 if the fuel contains z oxygen atoms.

Does it cover incomplete combustion?

No. It models complete combustion to carbon dioxide and water only.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools