A Christmas tree calculator estimates how many baubles you need for your tree. Enter the height of the foliage, the diameter at the bottom and a density, and it works out the surface of the cone and the number of decorations to buy.
How to use the Christmas tree calculator
- Choose US or metric units.
- Enter the height of the foliage and the diameter at the bottom.
- Pick how densely you want to hang the baubles.
- Press Calculate.
A tree is a cone
The tool treats the tree as a cone, with the point at the top and a circle at the bottom. Only the sloping surface carries decorations, so the base is not counted. For a right circular cone, the lateral surface area is the base radius times the slant height times pi [1]. The slant height is the distance from any point on the circle of the base to the apex [1]. Those two statements are on the cone page; the rest of the arithmetic here is our own working.
Finding the slant height
You enter the height of the foliage, which is straight up, and the diameter. Half of the diameter is the radius. The slant height follows from Pythagoras, as the square root of the height squared plus the radius squared. This is our own working, not a quotation. For a tree 6 feet tall and 3 feet wide, the radius is 1.5 feet and the slant height is 6.185 feet, a little longer than the height.
The surface of the cone
With the slant height known, the sloping surface is pi times the radius times the slant height [1]. For the 6 foot tree, that is 3.1416 times 1.5 times 6.185, or 29.14 square feet. In metric mode, the same sum is done in metres and the answer is in square metres, with the figure in the other unit shown beside it, so you can compare with a box that quotes either.
The density presets
The five density presets are our own choice, since no official source sets a bauble density: 10, 5, 3, 1 and 0.5 baubles per square foot, which are 108, 54, 32, 11 and 5 per square metre by our conversion. We name them Dense, Covered, Natural, Moderate and Sparse, so Dense is 10 per square foot and Sparse is 0.5. Treat them as styling choices, not rules.
How the count is made
The number of baubles is the surface area of the tree times the density, which is our own working. The tool rounds the result up, because you cannot hang part of a bauble. For the 6 foot tree at the natural density of 3 per square foot, 29.14 times 3 is 87.43, so you need 88 baubles.
Choosing a density
Natural, at 3 per square foot, is the default and gives a tree that looks decorated but not crowded. Dense and covered suit a tree that should look full of colour, but they need many more baubles: the same tree needs 292 at the dense setting. Moderate and sparse leave the green showing and suit a few large baubles. Try each setting to see how the number and the cost change.
Metric example
A tree 1.8 metres tall and 0.9 metres wide has a radius of 0.45 metres and a slant height of 1.855 metres. The sloping surface is 2.623 square metres. At the natural density of 32 per square metre, you need 83.94 baubles, so 84. Notice that this is close to the figure for the 6 foot tree, because 1.8 metres is just under 6 feet and the tree is a similar shape.
What is not included
The length of a strand of lights depends on how closely you wrap it round the cone, and no source we opened gives a rule for it. For that reason, this calculator does not estimate the length of lights. It gives the number of baubles only. For lights, a common approach is to measure the tree with a tape and add some extra.
Real trees
Real trees are not perfect cones. A fir narrows quickly at the top, a pine may be fuller in the middle, and an artificial tree may have a flat top and a wider base than you expect. The diameter at the bottom of the foliage, not the width of the stand, is the one to enter. The estimate is a guide for shopping, and a few spare baubles cost little.
Using the calculator
Measure the height of the green part of the tree, from the base of the foliage to the tip, and its widest diameter at the bottom. Enter them, choose the density, and read the number of baubles and the size of the cone. Change the density to compare, and keep the result with the Copy button so you can take it to the shop. Bauble packs vary, so round up to a full pack.
Common mistakes
- Measuring the height of the whole tree with its stand. Use the foliage only.
- Entering the radius as the diameter. The box wants the full width.
- Expecting a count of lights. Only baubles are estimated.
- Mixing feet and metres. Pick one unit.
What next
Use this often? Add Christmas Tr to your Home screen.
Frequently asked questions
What is a Christmas tree calculator?
A tool that estimates how many baubles a tree needs, from the surface of the tree treated as a cone and a density.
How do you find the surface of a Christmas tree?
Treat it as a cone: the sloping surface is pi times the radius times the slant height.
How many baubles per square foot?
The tool offers five presets of 10, 5, 3, 1 and 0.5, which are our own choices; the natural setting is 3.
Does the calculator work out the length of lights?
No. No source we opened gives a rule for the strand, so only baubles are estimated.
Why is the number rounded up?
You cannot hang part of a bauble, so the count goes up to the next whole number.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.