Saved

Press the star next to a tool's name to save it.

All my tools

Carnot Efficiency Calculator

Use this Carnot efficiency calculator to find the maximum efficiency of a heat engine working between a hot and a cold temperature, with the ideal work and the heat rejected.

Restored your last values ·

Enter the temperatures of the hot and the cold reservoirs in kelvin, Celsius or Fahrenheit. You get the Carnot efficiency, the highest that any heat engine can have between them. Add the heat taken in to get the work and the heat rejected.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the hot and cold temperatures, then press Calculate.

See full result

A Carnot efficiency calculator finds the highest efficiency that a heat engine can have when it works between a hot and a cold temperature. Enter the two temperatures in kelvin, Celsius or Fahrenheit. Add the heat taken in to find the work that the ideal engine could do and the heat that it must reject.

How to use the Carnot efficiency calculator

  1. Choose the temperature unit.
  2. Enter the hot and cold temperatures.
  3. Add the heat input for the work.
  4. Press Calculate.

The formula

The efficiency of a Carnot cycle is η = W ÷ Q_H = (Q_H − Q_C) ÷ Q_H = 1 − T_C ÷ T_H, where T_C and T_H are the absolute temperatures of the cold and hot reservoirs [1]. Temperatures must be in kelvin, or converted to it, which the calculator does for Celsius and Fahrenheit. The efficiency depends only on the two temperatures.

The maximum

The page states that no engine working between two heat reservoirs can be more efficient than a Carnot engine between the same reservoirs, and that the formula gives the maximum efficiency possible for any engine using the corresponding temperatures [1]. All reversible engines between the same reservoirs have the same efficiency [1]. Real engines have friction and heat losses and fall short of it.

A worked example

For a hot reservoir at 600 kelvin and a cold one at 300 kelvin, the efficiency is 1 − 300 ÷ 600 = 0.5, or 50 percent. For water at its boiling point, 373 kelvin, and at its freezing point, 273 kelvin, it is 26.8 percent. These calculations are our own. In Celsius, a steam plant at 550 degrees and a condenser at 30 degrees has a limit of 63.2 percent.

Work and heat

The work done in one cycle is W = Q_H (T_H − T_C) ÷ T_H [1]. With 1,000 units of heat taken in at 600 kelvin and 300 kelvin, the ideal work is 500 units, and the heat rejected to the cold side is the other 500. The page also notes that for a reversible cycle, Q_H ÷ T_H = −Q_C ÷ T_C, which is how the rejected heat relates to the temperatures [1].

Raising the efficiency

To raise the Carnot efficiency, increase the hot temperature or lower the cold one. At a cold temperature of 300 kelvin, raising the hot side from 600 to 900 kelvin raises the limit from 50 to 66.7 percent. Cooling the cold side from 300 to 250 kelvin at 600 kelvin raises it to 58.3 percent. These are our own examples. Power plants use the highest temperatures that their materials allow.

Why it is a limit

The Carnot cycle is reversible and has no losses, so it is an idealization. A real engine that runs at a useful power makes heat flow across finite temperature differences, which causes entropy to rise and efficiency to fall. The limit is useful for judging how much room a design has for improvement, and for rejecting claims that go beyond it.

Units

Enter the temperatures in kelvin, Celsius or Fahrenheit, both in the same unit. The calculator converts to kelvin for the formula: kelvin is Celsius plus 273.15, and Fahrenheit is converted to Celsius first. A temperature at or below absolute zero is not allowed. The heat input can be in any unit of energy, and the work and rejected heat are given in that unit.

Refrigerators

The same temperatures give the limit for a refrigerator or a heat pump, which is a Carnot engine run backwards, but with a different quantity, the coefficient of performance. This calculator gives only the efficiency of the engine, as a share of the heat taken in. For a refrigerator, a limit of T_C ÷ (T_H − T_C) applies, a formula that is our own and is not in the page.

Using the calculator

Enter the two temperatures, hot first. Read the efficiency as a percentage and as a decimal. Add the heat input to see the work and the rejected heat. To see the effect of the temperatures, change one at a time. Compare the figure with the real efficiency of the engine that you are studying to judge how close it is to the ideal.

Real engines

Real engines are well below their Carnot limits. A petrol car engine, for example, works with gases at about 2,000 kelvin, which would suggest a limit of over 80 percent with a 300 kelvin sink, yet the actual efficiency is a fraction of that, because of friction, heat losses and the fact that the gas is not at the peak temperature throughout the cycle. Treat the Carnot value as the ceiling of what a physical law allows, and not as a prediction.

Entropy view

The Carnot limit follows from the second law of thermodynamics. A cycle that took heat from one reservoir and turned all of it into work would reduce the entropy of the universe, which is not allowed. The cold reservoir has to receive some heat, and the amount is fixed by the ratio of the temperatures. That is why the limit does not depend on the working fluid or the design.

Common mistakes

  • Using Celsius in the formula directly. Convert to kelvin.
  • Swapping the hot and cold temperatures. Hot is first.
  • Treating the limit as achievable. Real engines fall short.
  • Applying it to a heat pump. That has a different formula.

What next

Use this often? Add Carnot Effic to your Home screen.

Frequently asked questions

What is a Carnot efficiency calculator?

A tool that finds the maximum efficiency of a heat engine between two temperatures.

What is the Carnot efficiency formula?

η = 1 − T_C ÷ T_H, with absolute temperatures.

Can a real engine exceed the Carnot efficiency?

No. It is the maximum for any engine between the same reservoirs.

What is the Carnot efficiency between 600 K and 300 K?

50 percent.

How is the work related to the heat input?

W = Q_H (T_H − T_C) ÷ T_H.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools