Saved

Press the star next to a tool's name to save it.

All my tools

Bra Size Calculator

Use this bra size calculator to estimate your band and cup size from your underbust and bust measurements, in inches or centimeters, with the underbust +0 or +4 method and US and UK cup letters.

Restored your last values ·

Measure snugly around your ribcage just under your bust for the underbust, and loosely around the fullest part of your bust. The cup is the difference between your bust and your band size, one cup per inch.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Your estimated bra size (US)

–

Enter your two measurements, then press Calculate.

See full result

This bra size calculator estimates your bra size from two measurements: your underbust and your bust. Enter them in inches or centimeters and choose how to work out the band, and the bra size calculator gives your band size, your cup size in both US and UK letters, and the difference between your bust and band that the cup is based on.

How to use the bra size calculator

  1. Choose inches or centimeters.
  2. Measure your underbust: pull a tape snugly around your torso just under your bust, keeping it level.
  3. Measure your bust around the fullest part.
  4. Pick the band method, then press Calculate.

Working out the band size

The band size comes from your underbust measurement, and there are two common methods. In the underbust +0 method, the tape is pulled around the torso at the fold under the bust, kept level and parallel to the floor, and the measurement in inches is rounded to the nearest even number for the band size. The older underbust +4 method starts the same way, but then adds 4 inches if the measurement is even and 5 if it's odd. A campaign around 2011 argued that the +4 method fails to fit most women, and the +4 method generally only applies to US and UK sizes. The calculator uses +0 unless you choose otherwise.

Working out the cup size

Because measuring each breast isn't practical, cup size is based on the difference between the band size and the over-the-bust measurement. In US and UK sizing, each cup is one inch: a difference under 1 inch is an AA cup, 1 inch is A, 2 inches B, 3 inches C and 4 inches D. Above that the two systems use different letters, so the calculator shows both.

Bust minus bandUS cupUK cup
Under 1 inAAAA
1 inAA
2 inBB
3 inCC
4 inDD
5 inDD/EDD
6 inDDD/FE
7 inDDDD/GF
8 inHFF
9 inIG
10 inJGG

Worked example

Say your underbust measures 32 inches and your bust 36 inches. With the +0 method, 32 is already even, so your band size is 32. Your bust is 4 inches more than your band, which is a D cup, so your estimated size is 32D in both US and UK sizing. With an underbust of 33 inches and a bust of 38, the band rounds to 34 and the difference is 4 inches, so 34D. With the +4 method, a 31-inch underbust gives a 36 band, so the same bust measurement would give a much smaller cup letter.

US and UK sizes side by side

US and UK bras share the same band numbers and the same cups up to D. Above that, the US system adds letters as DD/E, DDD/F and DDDD/G before continuing with H, I and J, while the UK system uses DD, E, F, FF, G, GG, H, HH, J and so on. A difference of 7 inches is a G in the US but an F in the UK, so always check which system a shop uses. Australian sizes follow a third pattern, and continental European sizes use centimeters and 2 centimeter cup steps.

When the size looks unusual

If the calculator gives a cup letter that seems much larger or smaller than you expect, check the measurements first: a loose underbust tape gives a larger band and a smaller cup, and a tight bust tape gives a smaller cup. Then try the other band method, as the +4 method adds several inches to the band. Department stores' own sizing charts start from the underbust measurement too, but their band sizes vary between manufacturers.

Centimeters

If you measure in centimeters, choose Centimeters: the calculator converts to inches, at 2.54 centimeters to the inch, and uses the same steps, because US and UK sizes are built on inches. Countries that use metric cup sizing have their own system with 2 centimeter steps, so their cup letters differ from these; use the bra size converter to change between systems.

Checking the fit

Calculating the right band size is complicated by many factors, and sizes vary between manufacturers, so treat the result as a starting point and try bras on. A few signs help: if the band rides up the torso at the back, the band is too big. If you change the band size, the cup letter changes too, because the cup is worked out from the band: the same bust measurement over a smaller band gives a bigger cup letter.

Common mistakes

  • Measuring too loosely under the bust. The underbust tape should be snug and level.
  • Mixing methods. A +4 band gives a different size from a +0 band.
  • Comparing US and UK letters directly. They differ above a D cup.
  • Trusting one number for every brand. Try the size on.

Tips

  • Stand straight and keep the tape level all the way round.
  • Measure twice and use the average.
  • Use the bra size converter to find your size in other countries' systems.

What next

Use this often? Add Bra Size to your Home screen.

Frequently asked questions

How does the bra size calculator work out my band size?

With the underbust +0 method it rounds your underbust in inches to the nearest even number; with +4 it adds 4 to an even measurement or 5 to an odd one.

How is cup size calculated?

From the difference between your bust and your band size: under 1 inch is AA, 1 inch A, 2 inches B, 3 inches C, 4 inches D.

What size is a 32 inch underbust and 36 inch bust?

32D with the +0 method.

Why do US and UK cup sizes differ?

They use different letters above D: a 5-inch difference is DD/E in the US and DD in the UK.

Is the bra size calculator result exact?

No. Sizing varies between brands, so use it as a starting point and try bras on.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools