A bacterial growth calculator finds the doubling time of a culture from two counts, the number of generations that have passed, the growth rate, the count after a given time, or the time needed to reach a count. It uses the equations for exponential growth and is useful for any cells that divide by doubling.
How to use the bacterial growth calculator
- Choose what to work out: the doubling time, the count after a time, or the time to reach a count.
- Enter the starting count, and the final count or the doubling time, and the elapsed time, all in the same unit.
- Press Calculate.
The doubling formula
The Wikipedia article on doubling time gives the simple doubling formula N(t) = N0 × 2 to the power t ÷ Td, where N0 is the initial number, t is time and Td is the doubling period.[1] Enter N0 = 100, a doubling time of 0.5 hours and 3 hours and the calculator gives 100 × 2 to the power 6 = 6,400. The number of generations is simply t ÷ Td, here 6. We state the generations as our own working from this formula, because the page does not write them out.
Finding the doubling time from two counts
The page gives Td = (t2 − t1) × ln(2) ÷ ln(q2 ÷ q1) for a quantity that grows from q1 at time t1 to q2 at time t2 at a constant rate.[1] With 1,000 cells growing to 8,000 in 3 hours, the ratio is 8, ln 8 = 3 × ln 2, so Td = 3 × ln 2 ÷ (3 × ln 2) = 1 hour. The calculator shows 1 hour, 3 generations and a growth rate of 0.69315 per hour.
The growth rate
For cell cultures the page writes growth as N(t) = N0 × e to the power rt, so that r = ln(N(t) ÷ N0) ÷ t, usually with t in hours.[1] It gives the doubling time as ln(2) divided by the growth rate.[1] For 100 cells growing to 1,000 in 2 hours, r = ln 10 ÷ 2 = 1.1513 per hour and the doubling time is 0.693147 ÷ 1.1513 = 0.60206 hours, about 36 minutes. The number of generations is log base 2 of 10, about 3.32. These are our own numbers worked from the page's formulas.
The phases of growth
The article on bacterial growth describes batch culture as having four phases: a lag phase, a log or exponential phase, a stationary phase and a death phase.[2] In the lag phase the bacteria adapt to growth conditions and are not yet able to divide, and it can last from an hour to several days.[2] In the log phase the cells double, and a plot of the natural logarithm of cell number against time is a straight line whose slope is the specific growth rate.[2] In the stationary phase growth and death rates are equal, often because a nutrient has run out or an inhibitory product has built up.[2] The calculator applies only to the straight-line part of the curve.
Why growth cannot go on forever
The page on bacterial growth says that exponential growth cannot continue indefinitely, because the medium is soon depleted of nutrients and enriched with wastes.[2] It also says that the growth rate during the exponential phase is often not constant but slowly decaying, and that the four phases are not always well defined.[2] Use counts taken from the log phase, and treat any prediction far beyond your measurements with care.
Doubling times in cell culture
The doubling-time page gives cell-line examples: a mouse mesenchymal stem cell has a doubling time of 21 to 23 hours, and a human cardiac stem cell about 29 hours, plus or minus 10.[1] Bacteria usually double far faster, but the page does not give a figure for a typical bacterium, so enter the doubling time that you measure or take from your own protocol. The page also notes that the real growth rate depends on the growth conditions.[2]
Worked examples
A culture starts at 5,000 cells per millilitre and reaches 640,000 after 7 hours. The ratio is 128, which is 2 to the power 7, so there are 7 generations and the doubling time is 1 hour. A culture with a doubling time of 40 minutes starting at 10 cells needs 40 × log2(1,000,000 ÷ 10) = 40 × 16.61 = 664 minutes to reach one million, about 11 hours. These are our own examples from the formulas above.
Plotting your own data
If you have several counts over time, plot the natural logarithm of the count against time. The page says that in the log phase this graph is a straight line whose slope is the specific growth rate.{2} Read the slope from two points on the straight part and enter those two counts and the time between them. The doubling time is then ln 2 divided by the slope. Points from the lag phase make the line curve at the start, and points from the stationary phase make it flatten at the end, so leave them out of the calculation.
Checking a result
You can check any result by working in the other direction. Enter your starting count and the doubling time that you found, and the calculator should give your final count after the same time. If the two do not agree, check that the time units match and that the counts are not rounded.
Common mistakes
- Mixing time units. Use the same unit for the elapsed time and the doubling time.
- Using counts from different phases. Lag and stationary phases give misleading doubling times.
- Counting dead cells. Use viable counts if the doubling time of living cells matters.
What next
Use this often? Add Bacterial Gr to your Home screen.
Frequently asked questions
What is a bacterial growth calculator?
A tool that works out the doubling time, number of generations, growth rate, final count or time for a culture that grows exponentially.
What is the formula for doubling time?
Td = t × ln(2) ÷ ln(N ÷ N0), where N0 is the starting count, N the final count and t the elapsed time.
How do I calculate the number of bacteria after a time?
N = N0 × 2 to the power t ÷ Td. With 100 cells and a doubling time of 30 minutes, 3 hours gives 100 × 64 = 6,400.
What are the phases of bacterial growth?
Lag, log or exponential, stationary and death. Exponential growth applies only to the log phase.
What is the cell doubling time calculator for?
It is the same calculation applied to cell cultures, where the doubling time is usually given in hours.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.