This arch calculator works out the radius, arc length, angle and area of a circular arch from its span and rise. Enter the width across the bottom of the arch and its height at the center, and the arch calculator gives the radius you need to draw or cut the curve, the length along the curve, and the area under it.
How to use the arch calculator
- Choose a unit: inches, feet, centimeters or meters.
- Enter the span, the straight distance across the base of the arch.
- Enter the rise, the height from the base to the top of the curve at the center.
- Press Calculate.
The geometry of a circular arch
A circular, or segmental, arch is a slice of a circle. In geometry it's called a circular segment: the span is the chord, a straight line across the circle, and the rise is the sagitta, the height of the arc above the chord. The Wikipedia article on circular segments gives the formulas that link them.
The arch formulas
With span c and rise h, the radius R of the circle is:
R = h ÷ 2 + c² ÷ (8 × h)
From the radius, the central angle θ of the arc (in radians) is 2 × arcsin(c ÷ 2R), and the arc length is s = R × θ. The area of the segment, the space between the arch and the base line, is R² ÷ 2 × (θ − sin θ). The calculator shows the angle in degrees.
Worked example
Say you're building an arched opening 36 inches wide with a 6-inch rise. The radius is 6 ÷ 2 + 36² ÷ (8 × 6) = 3 + 27 = 30 inches. The arc spans about 73.7°, its length along the curve is about 38.6 inches, and the area between the arch and the base line is about 147.2 square inches. To draw the curve, set a trammel or string compass to 30 inches and place its pivot 24 inches below the center of the span (the radius minus the rise).
When the rise is exactly half the span, the arch is a semicircle: for a 2-foot span and a 1-foot rise, the radius is 1 foot and the angle is 180°.
Reading the results
The big number is the radius of the arch. The table shows the arc length, the angle of the arc, the area under the arch and the diameter of the full circle the arch comes from. All lengths are in the unit you chose, and the area is in square units.
Using the radius to lay out an arch
Once you know the radius, you can lay out the curve full size. Mark the span on a sheet of plywood or the floor, find its center, and measure down from there by the radius minus the rise to find the center of the circle. A strip of wood or a string fixed at that point and cut to the radius will trace the arch through both ends of the span and the top of the rise. The arc length tells you how much flexible trim, molding or edging you'll need to follow the curve.
Flat and tall arches
A small rise compared with the span gives a large radius and a gentle curve, while a rise close to half the span gives a near semicircle. If the rise is more than half the span, the arch is more than half a circle; the calculator handles that too, giving an angle over 180°.
Finding the rise from the radius
Sometimes you know the radius you want and the span, and need the rise. The same geometry works in reverse: the rise is the radius minus the square root of the radius squared minus a quarter of the span squared. For a 36-inch span and a 30-inch radius, that's 30 − 24 = 6 inches. If you have a template of a set radius, you can try a few spans in the calculator to see what rise each gives.
Arches in different units
The formulas work in any unit, as long as the span and rise use the same one. Choose inches or centimeters for doorways, windows and furniture, and feet or meters for garden arches, bridges and larger openings. The area is shown in square units of the same kind.
Area for materials
The area under the arch tells you how much material fills the curved part of an opening, for example the glass in an arched window above a rectangular frame, or the plywood for an arched panel. Add the rectangle below the arch to get the area of the whole opening.
Common mistakes
- Measuring the rise from the floor. Measure from the base line of the arch, where it springs.
- Mixing units. Enter the span and rise in the same unit.
- Using it for elliptical arches. The formulas only fit circular arches.
- Forgetting the trim width. Inner and outer edges of a wide arch have different radii.
Tips
- Check your layout with a template before cutting.
- Add the trim width to the radius for the outer edge.
- Use the arc length to order flexible molding.
What next
Use this often? Add Arch to your Home screen.
Frequently asked questions
How does an arch calculator work?
It treats the arch as a circular segment and uses R = h/2 + c²/(8h) to find the radius from the span c and rise h.
How do you find the radius of an arch?
Radius = rise ÷ 2 + span² ÷ (8 × rise). A 36-inch span with a 6-inch rise has a 30-inch radius.
How do I find the length of an arch?
Arc length = radius × angle in radians, where the angle is 2 × arcsin(span ÷ 2 × radius).
What rise makes a semicircle?
A rise of exactly half the span.
Can I use it for an elliptical arch?
No. The formulas are for circular arches only.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.