Saved

Press the star next to a tool's name to save it.

All my tools

Regular Polygon Area Calculator

Pick a shape from triangle to dodecagon, enter its side, apothem or circumradius, and this regular polygon area calculator shows the area, perimeter and angles.

Restored your last values ·

All sides of a regular polygon are the same length. The apothem runs from the center to the middle of a side, and the circumradius runs from the center to a corner.

Area

–

Choose a shape and enter one length.

See full result

This regular polygon area calculator finds the area of a pentagon, a hexagon, an octagon or any other regular shape with 3 to 12 sides. Choose the shape, enter one length, and you'll see the area together with the perimeter, the apothem, the circumradius and the angles. You can start from the side length, which is the usual case, or from the apothem or the circumradius if that's what you measured. Pentagon is selected to begin with, so it works as a pentagon area calculator straight away.

What is a regular polygon?

In Euclidean geometry, a regular polygon is a polygon that is equiangular, which means all of its angles are equal in measure, and equilateral, which means all of its sides have the same length. A stop sign is a regular octagon, a honeycomb cell is close to a regular hexagon, and a regular pentagon has five equal sides and interior angles of 108°. If the sides or the angles of your shape aren't all equal, it isn't regular, and these formulas won't give the right answer.

Regular polygon area formula

For a regular polygon with n sides of length s, the area is:

Area = ¼ × n × s² × cot(π ÷ n)

The same area can be written as half the perimeter times the apothem:

Area = ½ × perimeter × apothem

The apothem is the distance from the center to any side, measured at a right angle. The perimeter is simply n × s. The calculator works out the side first when you give it the apothem or the circumradius, and then it uses the same formula for every shape.

How to use the regular polygon area calculator

  1. Choose the shape. Pick anything from a triangle to a dodecagon.
  2. Choose what you know: the side length, the apothem or the circumradius.
  3. Enter the length and pick its unit.
  4. Press Calculate. The area appears first, with the other measurements in the table below it.

Worked example: area of a pentagon

A regular pentagon has sides of 6 ft. Its perimeter is 5 × 6 = 30 ft. Its apothem is 4.1291 ft, so the area is ½ × 30 × 4.1291, which is 61.9372 sq ft. The calculator also shows a circumradius of 5.1039 ft, interior angles of 108° and 5 diagonals. For a quick check, the area of a regular pentagon is about 1.720 times the side squared, and 1.720 × 36 is close to 61.9.

Hexagon and octagon examples

Select Hexagon and enter a side of 4. The area is 41.5692 square units and the perimeter is 24. A regular hexagon is made of six equilateral triangles, which is why its circumradius is the same as its side. Select Octagon and enter a side of 2, and the area is 19.3137 square units with a perimeter of 16. These are the same steps you'd follow with a separate hexagon area calculator or octagon area calculator, so you only need one tool.

Area for a side of 1

Multiply the figure in this table by your side length squared to get the area of any size of the shape.

ShapeSidesArea when the side is 1Interior angle
Equilateral triangle30.433060°
Square41.000090°
Pentagon51.7205108°
Hexagon62.5981120°
Octagon84.8284135°
Decagon107.6942144°
Dodecagon1211.1962150°

Starting from the apothem or the circumradius

Sometimes the side is hard to measure, but the distance across is easy. The apothem is half the distance between two opposite flat sides of a shape with an even number of sides, so a hexagonal nut that measures 10 mm across the flats has an apothem of 5 mm. Choose Hexagon, select Apothem and enter 5, and the tool gives a side of 5.7735 and an area of 86.6025. The circumradius is the distance from the center to a corner. A regular pentagon drawn inside a circle of radius 10 has a side of 11.7557 and an area of 237.7641.

Angles and diagonals

Each interior angle of a regular polygon with n sides is (n − 2) × 180° ÷ n. Each exterior angle is 360° ÷ n, and the exterior angles always add up to 360°, or one full turn. The number of diagonals is ½ × n × (n − 3), which gives 2 for a square, 5 for a pentagon and 9 for a hexagon. The calculator lists all three so that you can check a drawing or set a saw to the right angle.

Where it's useful

  • Building and DIY. Work out the floor area of a gazebo, a hexagonal patio or an octagonal deck before you buy materials.
  • Tiling and paving. Find the area of one hexagonal tile, then divide the room's area by it.
  • School geometry. Check homework on perimeter, apothem and interior angles.
  • Crafts and design. Size a quilt block, a sign or a logo.

Why more sides means more area

As the number of sides grows, a regular polygon looks more and more like a circle. In the limit, a sequence of regular polygons with an increasing number of sides approximates a circle if the perimeter is fixed. It's also true that, of all polygons with a given perimeter and number of sides, the regular one has the largest area. That's why a regular shape is the efficient choice when you want the most space from a fixed length of fencing or edging.

Common mistakes

  • Using it for an irregular shape. Every side and angle must be equal.
  • Confusing the apothem with the circumradius. The apothem ends at the middle of a side, and the circumradius ends at a corner.
  • Mixing units. The area comes out in the square of the unit you choose.
  • Entering the distance across. Halve it first to get the apothem or the circumradius.

For rectangles, circles, triangles and sectors, use the area and perimeter calculator. Change the result into other units with the area converter, and work out floor space with the square footage calculator.

What next

Use this often? Add Regular Poly to your Home screen.

Frequently asked questions

How does the regular polygon area calculator work?

It finds the side length from the value you enter, then uses area = ¼ × n × s² × cot(π ÷ n), where n is the number of sides and s is the side length.

How do I find the area of a regular pentagon?

Multiply the side squared by about 1.720. A pentagon with 6 ft sides has an area of about 61.94 sq ft.

What is the apothem?

It's the distance from the center of a regular polygon to the middle of any side. It's also called the inradius.

How do I find the perimeter of a regular polygon?

Multiply the side length by the number of sides. A regular hexagon with 4 in sides has a perimeter of 24 in.

Can I use it for an irregular pentagon?

No. The formulas only work when every side and every angle is equal.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools