Saved

Press the star next to a tool's name to save it.

All my tools

API Gravity Calculator

Use this API gravity calculator to convert between API gravity and specific gravity at 60 °F, and see whether a petroleum liquid is light, medium, heavy or extra heavy.

Restored your last values ·

Choose whether you have the specific gravity or the API gravity, enter the value, and press Calculate. You get the other value, and the class of the oil.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value, then press Calculate.

See full result

An API gravity calculator converts between the API gravity of a petroleum liquid and its specific gravity, and tells you whether the oil is light, medium, heavy or extra heavy. Choose which value you have, enter it and read the other one.

How to use the API gravity calculator

  1. Choose what you want.
  2. Enter the specific gravity or the API gravity.
  3. Press Calculate.

What API gravity is

API gravity is a measure of how heavy or light a petroleum liquid is compared with water [1]. It is a scale that was set up by the American Petroleum Institute, and it is expressed in degrees. A higher API gravity means a lighter oil, and a lower one a heavier oil. Water has an API gravity of 10 degrees, so oils above 10 degrees float on water and oils below it sink [1].

The formula

The API gravity is found from the specific gravity at 60 degrees Fahrenheit by API = 141.5 ÷ SG − 131.5 [1]. Rearranged, SG = 141.5 ÷ (131.5 + API) [1]. For a specific gravity of 0.85, the API gravity is 34.97 degrees. For an API gravity of 30 degrees, the specific gravity is 0.8762. Water, with an SG of 1, gives exactly 10 degrees.

Classes of oil

Crude oil is often classed by its API gravity. The page gives light crude as above 31.1 degrees, medium as between 22.3 and 31.1 degrees, heavy as below 22.3 degrees and extra heavy as below 10 degrees [1]. The calculator shows the class of the result. Lighter crudes are usually easier to refine and worth more, so the API gravity is one of the main figures in the price of a crude.

An inverse scale

The scale looks odd, because the number rises as the oil gets lighter, which is the opposite of the specific gravity. That is a result of the way the scale was designed. Remember that a bigger API number means a lighter liquid. A gasoline of about 60 degrees is much lighter than a heavy fuel oil of about 15 degrees. These typical values are our own and only for orientation.

Specific gravity at 60 °F

The specific gravity in the formula is the density of the oil divided by that of water, both at 60 degrees Fahrenheit, which is about 15.6 degrees Celsius. If your reading was taken at another temperature, correct it to 60 degrees first with the tables or the method that your standard requires. The calculator does not correct for temperature, so use a corrected value.

Worked examples

A specific gravity of 0.80 gives an API gravity of 45.375, a light oil. A specific gravity of 0.90 gives 25.72, a medium oil. A specific gravity of 0.97 gives 14.38, a heavy oil, and a specific gravity of 1.05 gives 3.26, an extra heavy oil that sinks in water. These examples are our own calculations from the formula.

Using the result

The API gravity is used to price crude oil, to choose a refinery, and to check blends. You can also use the result to estimate a density, by multiplying the specific gravity by the density of water, about 1,000 kilograms per cubic metre. That estimate is our own and is only roughly accurate, since the water value changes a little with temperature.

Limits

The formula is for petroleum liquids, and the classes are conventions. They are not exact boundaries, and different organisations use slightly different limits. A very light condensate or a bitumen may fall outside what the classes were meant to describe. The calculator reports the class by the limits above, and you should check them against your own standard when it matters.

Using the calculator

Pick the mode, enter the value and press the button. The working line shows the formula, so you can check it by hand. If you enter an API gravity below −131.5, the specific gravity would be negative or undefined, and the calculator tells you that the value is not possible. Use the class line to see at a glance how the oil compares.

Common crudes and products

As a rough guide, which is our own and not from the page, gasoline has an API gravity of about 55 to 65, kerosene about 40 to 45, diesel about 30 to 40, and heavy fuel oil about 10 to 20. Crude oils range from under 10 for the heaviest bitumen-like grades to above 45 for the lightest condensates. Use the calculator on your own measured value, and do not rely on these ranges for any trade or safety decision.

Blending

When two oils are mixed, the specific gravities do not simply average, but for a rough estimate they come close, provided that you average by volume. API gravity itself should never be averaged, because the scale is not linear. Convert both oils to specific gravity first, take the volume-weighted mean, and convert back with the calculator.

Common mistakes

  • Treating a higher number as heavier. A higher API gravity is lighter.
  • Using a specific gravity at another temperature. Correct to 60 °F.
  • Thinking the classes are fixed. They are conventions.
  • Confusing API gravity with density. It is a scale based on SG.

What next

Use this often? Add API Gravity to your Home screen.

Frequently asked questions

What is an API gravity calculator?

A tool that converts between API gravity and specific gravity for petroleum liquids.

What is the API gravity formula?

API = 141.5 ÷ SG − 131.5.

What is the API gravity of water?

10 degrees.

What API gravity is light crude oil?

Above 31.1 degrees; medium is 22.3 to 31.1 and heavy is below 22.3.

Does a higher API gravity mean a heavier oil?

No. A higher API gravity means a lighter oil.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools