Saved

Press the star next to a tool's name to save it.

All my tools

Air-Fuel Ratio Calculator

Use this air-fuel ratio calculator to convert between AFR, lambda and equivalence ratio for gasoline, octane or your own fuel, and see whether a mixture is rich or lean.

Restored your last values ·

Choose the fuel, enter either the air–fuel ratio or lambda, and the calculator gives the other, the equivalence ratio, the fuel–air ratio and whether the mixture is rich or lean. Add an air flow to get the matching fuel flow.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the air–fuel ratio or lambda and choose the fuel, then press Calculate.

See full result

An air-fuel ratio calculator converts between the mass ratio of air to fuel and lambda, the ratio compared with the chemically ideal mixture. Enter either one, choose gasoline, octane or your own stoichiometric ratio, and it tells you whether the mixture is rich, lean or stoichiometric, and the equivalence ratio.

How to use the air-fuel ratio calculator

  1. Choose the fuel, or enter its stoichiometric ratio.
  2. Enter the air–fuel ratio or lambda.
  3. Optionally enter an air flow to get the fuel flow.
  4. Press Calculate.

Definitions

The air–fuel ratio is the mass ratio of air to a solid, liquid or gaseous fuel present in a combustion process [1]. The air–fuel equivalence ratio, lambda, is the ratio of the actual air–fuel ratio to the stoichiometric one for the mixture, λ = AFR / AFR_stoich [1]. A value of λ = 1.0 is at stoichiometry, rich mixtures have λ below 1.0 and lean mixtures have λ above 1.0 [1]. The fuel–air ratio is the inverse of the air–fuel ratio [1].

Equivalence ratio

The equivalence ratio, Φ, is the ratio of the fuel-to-oxidizer ratio to the stoichiometric fuel-to-oxidizer ratio, and it is the reciprocal of lambda, Φ = 1/λ [1]. Engine tuners use lambda, since it takes the fuel into account, while combustion researchers often use Φ. The calculator shows both, so you can compare with either convention.

Stoichiometric values

For gasoline the stoichiometric ratio is about 14.7 : 1 by mass, which is 14.7 grams of air per gram of fuel [1]. For pure octane it is approximately 15.1 : 1, which is λ of exactly 1.00 [1]. The page notes that gasoline blends with oxygenates such as MTBE can have a ratio as low as 14.1 : 1, so check your fuel [1]. Other fuels are not listed on the page that we read, so choose the custom option and type the stoichiometric ratio of your fuel.

Worked examples

At an air–fuel ratio of 14.7 with gasoline, lambda is 1 and the mixture is stoichiometric. With pure octane at 12.5 : 1, lambda is 12.5 ÷ 15.1 = 0.828 and Φ is 1.21, so the mixture is rich. For a lambda of 1.1 with gasoline, the air–fuel ratio is 1.1 × 14.7 = 16.17 : 1, a lean mixture. These are our own calculations from the definitions.

Fuel flow

If you know the mass flow of air into an engine, the fuel flow follows from the ratio: fuel = air ÷ AFR. With 100 grams of air per second at 12.5 : 1, the engine burns 8 grams of fuel per second. The result is in the same mass unit as the air flow. This step is our own working, using the definition of the ratio.

Why lambda is preferred

The page points out that fuel composition varies, so the stoichiometric ratio changes between fuels and even between batches, and it recommends lambda for that reason [1]. A lambda of 1.0 always means the chemically correct mixture, whatever the fuel. That is why engine controllers and exhaust sensors report lambda.

Burning with excess air

For combustion in air, each mole of oxygen comes with about 3.71 moles of nitrogen, and the stoichiometric or theoretical air is the amount needed for complete combustion [2]. Lean mixtures carry more air than that and the excess shows up as oxygen in the exhaust. Rich mixtures lack air, so some fuel burns incompletely.

Reading lambda in practice

A petrol engine at idle and light load runs close to lambda 1 so that the catalytic converter can clean the exhaust. Under full load the mixture is often enriched to a lambda of about 0.85 to 0.9, which the page links with maximum power at air–fuel ratios of 12.5 to 13.3 for octane, though that figure is marked as needing a citation [1]. A lean mixture of about 16 to 1 is associated with economy, also as a figure that needs a citation [1]. Treat these as typical rather than guaranteed values, and follow the maker's data for your engine.

Gasoline blends and oxygenates

Because fuel contains different amounts of oxygen, the same measured ratio can mean different lambda values. The page notes that the stoichiometric ratio can be as low as 14.1 to 1 for fuel containing MTBE [1]. If your fuel is a blend, look up its stoichiometric ratio and use the custom option.

Checking a measurement

A wideband sensor reports lambda directly, while a scan tool may report the air–fuel ratio assuming 14.7. Convert the one to the other with this calculator to compare readings from two sources, and remember that the 14.7 assumption is wrong for other fuels.

Rich and lean in plain words

A rich mixture has more fuel than the air can burn completely, so some fuel leaves the engine partly burned. A lean mixture has air to spare, which cools the combustion a little and leaves oxygen in the exhaust. Neither is wrong in itself, since engines are tuned to run rich or lean in different conditions, but extreme values cause misfires, overheating or high emissions.

Common mistakes

  • Mixing mass and volume ratios. The ratios here are by mass.
  • Using the gasoline value for another fuel. Enter the stoichiometric ratio of the fuel you burn.
  • Confusing lambda with the equivalence ratio. They are reciprocals.
  • Treating a figure from a forum as exact. Fuel blends change the stoichiometric ratio.

What next

Use this often? Add Air-Fuel Rat to your Home screen.

Frequently asked questions

What is an air-fuel ratio calculator?

A tool that converts between the mass ratio of air to fuel and lambda, and shows whether the mixture is rich or lean.

What is the stoichiometric air-fuel ratio of gasoline?

About 14.7 : 1 by mass.

What is lambda?

The actual air–fuel ratio divided by the stoichiometric one. Lambda 1 is ideal, below 1 is rich and above 1 is lean.

How is lambda related to the equivalence ratio?

Φ = 1/λ.

What air-fuel ratio is lean?

Any ratio above the stoichiometric value for the fuel, which means a lambda above 1.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools