Saved

Press the star next to a tool's name to save it.

All my tools

Video Watermark

Use this video watermark tool to place a PNG, JPG or WebP logo on a video, choose its corner, size and opacity, and save an MP4, all in your browser.

%
%

Choose the logo file, a corner or the centre, its width as a percentage of the video width, and how opaque it should be.

Your file is processed in your browser. Nothing is uploaded.

FFmpeg runs in your browser as ffmpeg.wasm (GPL-2.0-or-later). The first use downloads about 10 MB.

Your file

Choose a video and a logo, then press Add watermark.

This video watermark tool places your logo on a clip, in a corner or the centre, with a size and opacity you choose, all in your browser.

How the video watermark is placed

The watermark is drawn with the FFmpeg overlay filter, which puts one picture on top of another at a position you set. [1] This tool first scales your logo to a percentage of the video width, keeping its own proportions, then applies the opacity as an alpha value, and finally overlays it 20 pixels from the chosen corner. A PNG with a transparent background works best, because the transparent area lets the video show through.

Worked example

Suppose your video is 1280 pixels wide and your logo is a square PNG. Set the size to 20 percent and the opacity to 70 percent in the bottom right. The logo is scaled to 256 pixels wide, drawn at 70 percent opacity and placed 20 pixels from the right and bottom edges. For a faint centred mark across the whole frame try 40 percent size and 30 percent opacity.

Settings explained

SettingRangeWhat it does
PositionFour corners or centreWhere the logo is anchored
Logo width5 to 90 percentLogo width as a share of the video width
Opacity5 to 100 percent100 is solid, lower is more see-through

The video is encoded as H.264 with AAC audio in an MP4 container, [2] so the result plays in any modern player. The watermark is part of the pictures after encoding and cannot be switched off by a viewer.

Video watermark tips

  • Keep corner logos small, around 10 to 20 percent of the width, so they do not distract.
  • Choose a light logo for dark footage and a dark logo for light footage, or use a logo with a thin outline.
  • Keep a copy of the unmarked original. A watermark cannot be removed later.
  • Check the platform you post to. Some crop the edges of vertical videos, which can cut off a corner logo.

Privacy, limits and the FFmpeg core

This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [3] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your video and logo is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.

Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.

Step by step with the video watermark

  1. Press the upload box and choose your video.
  2. Choose the logo file in the Extra file box.
  3. Pick the position, then the logo width and the opacity.
  4. Press Add watermark and wait for the progress to reach 100%.
  5. Download the MP4 and check the logo at full size.

Who uses the video watermark

Photographers, teachers and small businesses brand their videos before sharing them, to credit the maker and to discourage reuse without a mention. Event organisers also put a sponsor logo on recordings.

Common mistakes to avoid

  • Using a logo with a solid white box instead of a transparent PNG.
  • Making the logo too big so it hides the picture.
  • Placing it where an app overlays its own buttons, such as the bottom of vertical videos.
  • Forgetting to keep the original without a watermark.

Quality, formats and browser notes

Every video this site writes is encoded with the x264 or equivalent encoder at a constant quality, so the picture looks close to the source while the size stays sensible. Most outputs use an MP4 container with H.264 video and AAC audio because that pairing plays on nearly every phone, TV, browser and editor. Chrome, Edge, Firefox and Safari on a computer all run the converter; phones can run it too, but a long clip may be slow or stop if the browser runs short of memory. If that happens, close other tabs, use a shorter clip or work from a computer.

Transparent PNG logos

A PNG file can hold a fourth channel called alpha that says how see-through each pixel is. When you use a PNG with a transparent background, only the shape of the logo is drawn on the video. A JPG has no alpha, so it always shows as a solid rectangle. If your logo is a JPG with a white background, open it in an image editor, remove the background and save it as a PNG before using this tool.

If something goes wrong

If the page says the converter could not be loaded, check your internet connection, because the 10 MB core is fetched the first time you use it, and reload the page. If the job fails on a particular file, it may be damaged or use a codec that this browser build of FFmpeg does not include; try opening it in a media player first. If the page stops with a memory error, the file is too large for the browser, so trim it, resize it or use a computer with more memory. Pressing Stop ends the job at once and frees the memory, and you can start again with other settings.

What next

Use this often? Add Video Waterm to your Home screen.

Frequently asked questions

How do I add a logo with the video watermark tool?

Choose your video, choose the logo in the Extra file box, set the position, size and opacity and press Add watermark.

Which logo files work?

PNG, JPG and WebP. A PNG with a transparent background looks best.

Can I change the transparency?

Yes. Opacity runs from 5 to 100 percent, and a lower value makes the logo more see-through.

Can I add text as a watermark?

Not directly. Make an image of your text, for example a transparent PNG, and use that as the logo.

Is the video uploaded?

No. Both files are processed in your browser and stay on your device.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Video & Audio Tools