This video speed changer makes a clip faster or slower, from a quarter speed to four times speed, in your browser, with the sound kept in tune.
How this video speed changer works
To change the speed of the picture, FFmpeg rewrites the presentation timestamps of each frame with the setpts filter. Dividing the timestamps by 2 makes the video play twice as fast, and multiplying them by 2 makes it half speed. [1] The sound needs separate treatment. Simply resampling audio changes its pitch, which gives the chipmunk effect, whereas time stretching changes the duration without changing the pitch. [2] This tool uses the atempo filter for that, and for factors outside its single step range it chains several steps, such as 2 then 2 for 4x.
Worked example
A 60 second clip at 2x speed becomes 30 seconds, because duration is divided by the speed. At 0.5x the same clip lasts 120 seconds. At 4x it lasts 15 seconds, and at 0.25x it lasts 240 seconds. The frame rate stays the same, so slow motion repeats frames rather than creating new ones; very slow speeds therefore look steppy unless the original was filmed at a high frame rate.
Speed table
| Speed | 60 s clip becomes | Typical use |
|---|---|---|
| 0.25x | 240 s | Extreme slow motion of fast action |
| 0.5x | 120 s | Studying a movement |
| 0.75x | 80 s | Gentle slow down |
| 1.25x | 48 s | Light tightening of a lecture |
| 2x | 30 s | Time lapse, skipping dull parts |
| 4x | 15 s | Long recordings in a few seconds |
Video speed changer tips
- Speech at 1.25x to 1.5x is easy to follow. Above 2x it gets hard to understand.
- If a video has no sound track the tool retries without audio, so silent clips work too.
- Trim the video first when you only need part of it to change speed.
- The result is an MP4 with H.264 video. The -an option, which drops audio, is part of FFmpeg and is used for silent clips. [3]
Privacy, limits and the FFmpeg core
This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [4] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your video is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.
Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.
Step by step with the video speed changer
- Press the upload box and choose your video.
- Open the Speed list and pick, for example, 2x or 0.5x.
- Press Change speed and wait for the progress to reach 100%.
- Download the MP4 and watch it to check the pace.
- Try another speed if it is too quick or too slow.
Who uses the video speed changer
Fitness trainers slow a movement to show the technique, gamers speed up long runs, teachers speed up a lecture that is too slow, and editors create time lapses and slow motion effects from ordinary footage.
Common mistakes to avoid
- Expecting smooth slow motion from a normal 30 frames per second clip.
- Using 4x on speech and wondering why it cannot be understood.
- Forgetting that the new length is the old length divided by the speed.
- Changing the speed of a very long video when only a part needs it.
Quality, formats and browser notes
Every video this site writes is encoded with the x264 or equivalent encoder at a constant quality, so the picture looks close to the source while the size stays sensible. Most outputs use an MP4 container with H.264 video and AAC audio because that pairing plays on nearly every phone, TV, browser and editor. Chrome, Edge, Firefox and Safari on a computer all run the converter; phones can run it too, but a long clip may be slow or stop if the browser runs short of memory. If that happens, close other tabs, use a shorter clip or work from a computer.
Slow motion and frame rate
True slow motion needs many frames per second. A phone shooting 240 frames per second and played at 30 shows the action eight times slower and still looks smooth, because each frame is real. A normal 30 frames per second clip slowed to 0.25x shows every frame four times, which looks like a slideshow. This tool changes timing only and does not invent frames, so choose speeds that suit your source.
If something goes wrong
If the page says the converter could not be loaded, check your internet connection, because the 10 MB core is fetched the first time you use it, and reload the page. If the job fails on a particular file, it may be damaged or use a codec that this browser build of FFmpeg does not include; try opening it in a media player first. If the page stops with a memory error, the file is too large for the browser, so trim it, resize it or use a computer with more memory. Pressing Stop ends the job at once and frees the memory, and you can start again with other settings.
What next
Use this often? Add Video Speed to your Home screen.
Frequently asked questions
What speeds does the video speed changer offer?
You can pick 0.25x, 0.5x, 0.75x, 1.25x, 1.5x, 2x, 3x or 4x.
Does the audio change pitch?
No. The sound is time stretched with the atempo filter, so it speeds up or slows down without the chipmunk effect, though extreme speeds can sound rough.
How long will the new video be?
Divide the original length by the speed. A 60 second video at 2x lasts 30 seconds.
Can I make real slow motion?
You can slow a video down, but new frames are not invented, so slow motion looks smoothest when the original was shot at a high frame rate.
Is my video uploaded?
No. It is processed in your browser with ffmpeg.wasm.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.