A velocity addition calculator combines two speeds the way special relativity says that they combine. When both are a large fraction of the speed of light, the combined speed is less than the ordinary sum and never passes the speed of light. Enter two speeds and read the result.
How to use the velocity addition calculator
- Choose the unit: a fraction of c, kilometres per second or miles per hour.
- Enter the speed v of the first object and the speed w of the second, as seen from the first.
- Press Calculate.
Why speeds do not simply add
On a road, a car at 50 and a passenger who throws a ball forward at 10 give a ball at 60. At speeds near the speed of light this fails, because no object's speed can exceed the speed of light. The relativistic velocity-addition formula is built to respect that limit [1]. The calculator applies the correct formula and also shows the ordinary sum for comparison.
The formula
For motion along one line, the relativistic formula is u = (v + w) ÷ (1 + v w ÷ c²) [1], where v is the speed of the spaceship, w the speed of the projectile as seen from the ship, and u the speed of the projectile as seen from outside. The ordinary, Galilean sum is v + w, which the formula gives at low speeds [1]. The calculator computes both. The second object may move the opposite way, in which case you enter its speed as a negative number.
Using c as the unit
The easiest way to enter speeds is as a fraction of c, as in 0.35 for 35 percent of the speed of light. We use c = 299,792,458 metres per second, which is exact because the metre is defined from it [3]. With speeds in units of c the formula becomes u = (v + w) ÷ (1 + v w), which is simple to check by hand. The calculator also accepts kilometres per second and miles per hour, and converts them with that value.
A worked example
A worked example is an electron emitted at 0.5 c by a nucleus that moves at 0.35 c, which gives about 0.72 c. The calculation is (0.35 + 0.5) ÷ (1 + 0.35 × 0.5) = 0.85 ÷ 1.175 = 0.723404 c. The ordinary sum would be 0.85 c, so the relativistic result is 0.126596 c smaller. The calculator reproduces this result exactly.
Never faster than light
The formula is built so that no object's speed exceeds c [1], and if either speed equals c the result is c. Try 0.9 c and 0.9 c: the sum is 1.8 c but the formula gives 1.8 ÷ 1.81 = 0.994475 c. The calculator accepts speeds up to the speed of light, and returns an error for a larger one, because the formula does not apply to such a speed.
Low speeds
At everyday speeds the product v w ÷ c² is tiny, and the formula reduces to the ordinary sum, as the Wikipedia article notes [1]. For a jet at 600 miles per hour and a missile at 2,000 miles per hour, the difference is far too small to show. The calculator shows it only in the last digits, which is why the result matters only for speeds near the speed of light.
The Lorentz factor
The calculator also gives the Lorentz factor of the combined speed, γ = 1 ÷ √(1 − u²/c²) [2]. This is the definition in the Wikipedia article on time dilation. For the example, u = 0.723404 c gives γ = 1.44838, so a clock that moves with the electron runs about 45 percent slow.
Opposite directions
If the second object moves against the first, enter its speed as a negative number. A ship at 0.9 c that fires a projectile backwards at 0.5 c gives (0.9 − 0.5) ÷ (1 − 0.45) = 0.727273 c. This is much more than the ordinary result of 0.4 c, and it may seem odd, but it follows from the formula. If one speed is c and the other is minus c, the formula has no meaning, and the calculator says so.
Motion across the line
The formula holds for motion along one line. The formulas for the perpendicular components differ and involve the factor √(1 − v²/c²) [1]. This calculator is for motion along a single line only. For two speeds at an angle to each other, you need the full transformation of the velocity components, which this tool does not do.
Choosing the observers
To apply the formula, call the outside observer A, the first moving object B and the second C. Then v is the speed of B as seen by A, and w the speed of C as seen by B, and the result is the speed of C as seen by A. Keep the roles straight, and the order of the two speeds does not matter, as the formula is symmetric in v and w.
When to use which unit
Use the fraction of c for thought experiments and textbook problems, since the numbers stay small and the formula is easy to check by hand. Use kilometres per second when you work with astronomical data such as the speed of a jet or a galaxy, and miles per hour to see how little the correction matters for everyday vehicles. Whatever the unit, the calculator converts the speeds to fractions of c first, applies the formula once, and converts the answer back.
Common mistakes
- Adding the speeds as in everyday life. Near the speed of light this gives too large a result.
- Entering a speed above c. The formula does not apply.
- Mixing the units of v and w. Both use the unit that you chose.
- Forgetting the sign. A negative w means the opposite direction.
What next
Use this often? Add Velocity Add to your Home screen.
Frequently asked questions
What is a velocity addition calculator?
A tool that combines two speeds with the relativistic formula, which keeps the result below the speed of light.
What is the velocity addition formula?
u = (v + w) ÷ (1 + v w ÷ c²) for motion along one line.
What do 0.35 c and 0.5 c give?
About 0.7234 c, not the ordinary sum of 0.85 c.
Can two speeds add up to more than c?
No. The relativistic sum is always at most c.
When is the ordinary sum good enough?
At everyday speeds, where v w ÷ c² is tiny.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.