Saved

Press the star next to a tool's name to save it.

All my tools

Twitter / X Thread Maker

Paste your long post, and this X thread maker splits it into numbered posts at natural breaks, each within the character limit, so you can copy and post them one by one.

Restored your last values ·

The tool breaks text at paragraphs and sentences wherever it can. Links count as 23 characters.

Your text stays in your browser. Nothing is uploaded or posted.

Your thread

–

Paste your text and press Make thread.

Recent results

An X thread maker turns one long piece of writing into a series of posts that each fit the character limit. Paste your text and press Make thread, and this X thread maker splits it into numbered posts, breaking at the ends of paragraphs and sentences wherever it can. Each post shows its own character count and has a Copy button, so you can publish the thread one post at a time. It counts characters the way X does, and it doesn't connect to your account or post anything for you.

How to use the X thread maker

  1. Paste or type your text into the box.
  2. Check the character limit. It starts at 280.
  3. Choose whether to add numbers, such as 1/5, to the end of each post.
  4. Press Make thread.
  5. Copy the first post and publish it on X.
  6. Reply to it with the next post, and carry on until the thread is complete.

How X counts characters

According to X's developer documentation, posts can contain up to 280 characters, but not every character has the same weight. This tool follows those rules:

ContentCounts as
Latin letters, numbers and punctuation1 each
Emoji, including skin tones and combined emoji2 each
Chinese, Japanese and Korean characters2 each
Any link, however long23

That means that a post of nothing but emoji can only hold 140 of them, and a very long web address uses the same 23 characters as a short one. Some accounts can post more text, so you can raise the limit if yours allows it.

How the text is split

A thread is easiest to read when each post makes sense by itself. The tool therefore tries to keep whole sentences together. It fills a post one sentence at a time. If the next sentence won't fit and the post is already at least half full, it starts a new post. If a post would otherwise be left very short, it splits the sentence between words instead. A paragraph break often starts a new post too. Only a single word that's longer than the limit gets cut in the middle. When numbering is on, the tool leaves enough room for labels such as 12/15, so they never push a post over the limit.

A worked example

Suppose that you've written about 900 characters on how you plan your week, in three short paragraphs. Paste the text, keep the limit at 280, leave numbering on, and press Make thread. You'll get four posts or so, each ending in a label such as 1/4. The counter under each post shows how much of the limit it uses. If the first post ends awkwardly, add a paragraph break where you'd like the split to go, and press the button again.

Writing a thread that people finish

  • Lead with the point. The first post decides whether anyone reads the second.
  • Make each post stand alone. Many readers will only see one of them.
  • Keep sentences short. They're easier to split and easier to read.
  • Use line breaks. Blocks of text are hard to read on a phone.
  • End with a clear close: a summary, a link or a question.

Should you number your posts?

Numbers tell readers how long a thread is and where they are in it, which is useful for tutorials and step-by-step lists. On the other hand, they take up a few characters, and some writers feel that they make a post look more formal. For a short, conversational thread, you may prefer to turn them off. If you change your mind about length after posting, remember that fixed numbers such as 3/5 won't update on their own.

Before you publish

Read the whole thread from top to bottom, as your readers will. Check that any links work, and make sure that none of them have been separated from the sentence that explains them. Prepare any images in advance, and decide which post each one belongs to. If you'd rather not publish it all at once, you can copy your posts into a document or a planner and come back to them later. When you are happy, publish the first post, then add each following post as a reply to the one before.

Editing after the split

The tool gives you a starting point, and a few small edits will usually make the thread feel natural. If one post ends on a weak phrase, move a sentence up or down in your original text and make the thread again. If a post runs well below the limit, that's fine, since a short post can add emphasis. Aim for a rhythm that you would be happy to read on a phone.

Common mistakes

  • Splitting at the worst moment. Add paragraph breaks to guide the tool.
  • Forgetting link length. Every link counts as 23 characters.
  • Posting too many at once. A long thread needs a strong reason to exist.

Find tags with the hashtag generator, write hooks with the caption generator, and size your banner with the X header image resizer.

What next

Use this often? Add Twitter / X to your Home screen.

Frequently asked questions

How does the X thread maker work?

It splits your text into posts within the character limit, keeps sentences together where it can, and can number each post.

What is the character limit on X?

X's developer documentation says that posts can contain up to 280 characters.

How are links and emoji counted?

Every link counts as 23 characters, and each emoji counts as 2.

Does this tool post to my account?

No. It prepares the text, and you copy each post into X yourself.

Can I use a higher limit?

Yes. Change the characters per post if your account allows longer posts.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Text & Writing Tools