A ton to kW converter changes tons of refrigeration, the unit used to rate air conditioners and chillers, into kilowatts, and back. One ton of refrigeration is about 3.517 kilowatts. Enter a value, pick the direction, and you also get watts, BTU per hour and kilocalories per hour.
How to use the ton to kw converter
- Choose the direction.
- Enter the value to convert.
- Press Calculate.
What the ton is
The ton here is the ton of refrigeration, a rate of cooling, not a weight. It is defined as the rate of heat transfer that results in the freezing or melting of one short ton of ice in 24 hours [1]. It is used to rate air conditioners, heat pumps and chillers, and it is a unit of power, so it converts to kilowatts.
The conversion factor
One ton of refrigeration is about 3.5168525 kilowatts, often rounded to 3.517. The modern definition is exactly 12,000 BTU per hour (IT), or 3.516853 kW [1]. The tool uses 3.516853. To convert tons to kilowatts, multiply by this factor, and to go the other way, divide the kilowatts by it.
A tons example
For example, 6 tons is about 21.1 kW (6 × 3.517 = 21.102), and 7.2 tons is about 25.32 kW. With the unrounded factor the tool gives 21.101 kW and 25.321 kW. The difference of one in the last digit comes only from the rounding of the factor.
A kilowatt example
For example, 89 kW is 25.306 tons if you divide by 3.517. The tool, which divides by 3.516853, gives 25.307 tons. Choose the second direction, type 89, and compare. A small chiller of 89 kilowatts of cooling is therefore rated at about 25 tons, which helps when you read a manufacturer's data sheet written in the other unit.
BTU per hour
The definition in terms of BTU is exact: 12,000 BTU per hour is one ton [1]. The tool multiplies your number of tons by 12,000 to give BTU per hour, so 6 tons are 72,000 BTU per hour. This is the unit that most air conditioner labels use in the United States. Dividing a BTU per hour rating by 12,000 gives the tons, which is our own arithmetic from the definition.
Kilocalories per hour
Wikipedia lists the ton of refrigeration as 3,025.97 kilocalories per hour in the infobox [1]. The tool shows this, scaled by the number of tons, for readers who work in metric heat units. Six tons are about 18,156 kilocalories per hour. A watt is a joule per second, so the kilowatt figure times 1,000 is the same power in watts.
Not a weight
A metric ton is a mass of 1,000 kilograms and has no kilowatt equivalent. A short ton or a long ton is also a mass. The conversion here does not apply to them. If you need to convert the weight of a load, use a weight converter. If you need to size cooling for a room, use the tonnage of the unit. The tool states the difference in its note.
Cooling and power input
A ton of refrigeration is the heat moved, not the electricity used. A unit rated at 3 tons removes about 10.5 kW of heat, but its compressor draws less, since it moves heat rather than making it. The ratio of heat moved to power drawn is the coefficient of performance, which the tool does not compute. This is general background, not a statement from the pages we read.
Other definitions
Wikipedia lists one modern definition. Older or regional definitions of a ton of refrigeration exist, but we did not open a page that gives them, so the tool uses only the 12,000 BTU per hour definition. If your equipment data uses a different basis, check which ton the maker means before you rely on the converted figure.
Using the results
Pick the direction, enter the number and press Calculate. The first line gives the main conversion. The second line gives the formula, and the last line shows the same power in watts, BTU per hour and kilocalories per hour. For a quick estimate, multiply tons by 3.5 to get kilowatts, or divide kilowatts by 3.5 to get tons.
Reading an air conditioner label
Many labels give the cooling capacity in BTU per hour. Divide by 12,000 to get the tons: 24,000 BTU per hour is 2 tons, 36,000 is 3 tons and 60,000 is 5 tons. Multiplying by 3.516853 then gives the kilowatts, which are 7.034 kW, 10.551 kW and 17.584 kW. This arithmetic follows from the definition of the ton given on Wikipedia [1]. Use the tool to avoid slips with the zeros.
Rounding
Most data sheets round the factor to 3.5 or 3.517, so two sources may differ in the last digit. For a purchase or a design, use the rated capacity from the maker, in the unit it gives, and use this converter only to check it against another unit. The figures here come from the factor above, not from any test of a real machine.
Common mistakes
- Treating the ton as a weight. It is a cooling rate.
- Using 3.5 for precise work. Use 3.516853.
- Mixing heat moved and power drawn. They are different things.
- Reading BTU as BTU per hour. The unit is a rate.
What next
Use this often? Add Ton to Kw to your Home screen.
Frequently asked questions
What is a ton to kW converter?
A tool that converts tons of refrigeration to kilowatts and kilowatts to tons.
How many kW is one ton of refrigeration?
3.516853 kW, which is 12,000 BTU per hour, or about 3.517 kW.
What is a ton of refrigeration?
A unit of cooling power, based on the heat needed to melt one ton of ice in 24 hours.
How do you convert kW to tons?
Divide the kilowatts by 3.516853.
Can this convert a metric ton to kW?
No. A metric ton is a mass, so it has no kilowatt equivalent.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.