Saved

Press the star next to a tool's name to save it.

All my tools

Square in a Circle Calculator

Use this square in a circle calculator to find the side and area of a square inscribed in a circle, and the circle inscribed in a square, from any one measure.

Restored your last values ·

A square can sit inside a circle, with its corners on the circle, and a circle can sit inside a square, touching all four sides. Enter any one measure and the calculator gives the square, the circle around it and the circle inside it.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you know, enter the value, then press Calculate.

See full result

A square in a circle calculator finds the side and area of the largest square that fits inside a circle, and the largest circle that fits inside a square. Enter any one measure, such as the radius of the circle, the side of the square or the area of the square, and you get all the others: the sides, the diagonal, the areas, and the share of the circle that the square fills. It runs in your browser.

How to use the square in a circle calculator

  1. Choose what you know, such as the radius of the circle or the side of the square.
  2. Enter the value.
  3. Press Calculate.
  4. Read the square, the outer circle and the inner circle.

The square and its diagonal

The Wikipedia article on the square says that a square whose four sides have length ℓ has perimeter 4ℓ, and that its diagonal is √2 times the side, so the diagonal is ℓ√2.[1] The area is ℓ², which is also half of the square of the diagonal, ½d².[1] So a square with a side of 10 has a perimeter of 40, a diagonal of 14.142 and an area of 100. If the diagonal is 10, the side is 10 ÷ √2, about 7.071, and the area is 50.

The circle around the square

When a square is drawn inside a circle with all four corners on the circle, its diagonal is a diameter of the circle. So the radius of the circle is half of the diagonal, R = ℓ√2 ÷ 2 = ℓ ÷ √2, and the side of the square is R√2. For a circle with a radius of 5, the square has a side of 5√2, about 7.071, a diagonal of 10 and an area of 50, which is 2R². This follows from the diagonal formula on the page. The area of the circle is πR², about 78.54, so the square fills 2 ÷ π, about 63.7 percent, of the circle, and the four circular segments between the square and the circle fill the rest, 28.54.

The circle inside the square

A circle that touches all four sides of a square has a diameter equal to the side, so its radius is r = ℓ ÷ 2. The article on tangential quadrilaterals says that the kites, which include the rhombi, which in turn include the squares, are examples of tangential quadrilaterals, which are quadrilaterals that have an inscribed circle.[2] The page also states that the semiperimeter s is at least 4r, with equality if and only if the quadrilateral is a square. With a semiperimeter of 2ℓ, that gives r = ℓ ÷ 2 for a square, a short derivation from the page. For a side of 10, the circle inside has a radius of 5 and an area of 25π, about 78.54, which is π ÷ 4, or 78.5 percent, of the square. The corners of the square outside the circle fill 21.46.

The area of a circle

The calculator uses the area of a circle, πr², where r is the radius.[3] For the circle around the square it uses the circumradius R, and for the circle inside it uses r = ℓ ÷ 2. The ratio of the two circles is always 2 : 1 in area, because R² = 2r², which you can see in the results: for a square with a side of 10, the outer circle is 157.08 and the inner circle is 78.54.

Worked example

You want to cut the largest square tile from a round table top with a diameter of 1.2 m. The diameter is the diagonal, so the side is 1.2 ÷ √2, about 0.849 m, and the tile has an area of 0.72 m², compared with 1.131 m² for the whole circle. Choose the diameter of the circle as the known value and enter 1.2. If you instead need the largest round plate that fits in a square box with a side of 30 cm, the plate has a radius of 15 cm and a diameter of 30 cm, and it uses 78.5 percent of the box.

Squares and circles in design

The relationships are used in woodworking, tiling, packaging and engineering. The square cut from a round log has a side of the diameter divided by √2. A round pipe in a square duct needs a duct side at least equal to the pipe diameter. When you are checking a cut or a fit, the shares of 63.7 percent and 78.5 percent are handy numbers to remember. They do not depend on the size, since the shapes are always similar.

Fitting shapes in practice

When you cut a square panel from a round blank, or a round hole in a square plate, the numbers show how much material is used and how much is wasted. The square from the round blank uses 63.7 percent, and the round hole in the square uses 78.5 percent. These shares are the same for every size, so they are a fast way to compare options in a design. The offcuts can be found from the rows for the area between the shapes.

Common mistakes

  • Using the side as the diameter of the outer circle. It is the diagonal that equals the diameter of the outer circle.
  • Forgetting the √2. The diagonal is the side times √2.
  • Mixing up the two circles. The outer circle goes through the corners, and the inner circle touches the sides.
  • Comparing lengths and areas. The areas of the two circles are in the ratio 2 : 1.

What next

Use this often? Add Square in a to your Home screen.

Frequently asked questions

What is a square in a circle calculator?

A tool that finds the measures of the square that has its corners on a circle, and of the circle that touches the sides of a square.

How do I find the side of a square inscribed in a circle?

Multiply the radius of the circle by √2. A radius of 5 gives a side of 7.071.

What is the area of a square inscribed in a circle?

2R², twice the square of the radius. For a radius of 5 it is 50.

What share of a circle does the inscribed square fill?

2 ÷ π, about 63.7 percent.

What share of a square does its inscribed circle fill?

π ÷ 4, about 78.5 percent.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools