Saved

Press the star next to a tool's name to save it.

All my tools

Spherical Cap Calculator (Volume and Surface Area)

Use this spherical cap calculator to find the volume, curved surface area, base area and total surface of a cap cut from a sphere. Enter the sphere radius and cap height, or the base radius and cap height.

Restored your last values ·

A cap is the piece you cut from a sphere with one flat slice. Choose which radius you know, enter it with the cap height h, in one unit.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Fill in the radius and the cap height.

See full result

A spherical cap calculator finds the volume and surface area of the piece of a sphere that lies on one side of a flat cut. A dome, a bowl, a lens, a water drop on a surface and a tank end are all spherical caps. You need only two measurements: the sphere radius and the height of the cap, or the radius of the flat base and the height.

What is a spherical cap?

Slice a sphere with a plane. The smaller or larger piece with one curved face and one flat circular face is a cap. Three lengths describe it: the sphere radius r, the cap height h, measured from the flat face to the top of the curve, and the base radius a, the radius of the flat circle.

These lengths are linked by the relations a² = h(2r − h) and r = (a² + h²) ÷ (2h). [1] Give any two and the third follows.

Spherical cap formulas

The volume and curved area depend on which pair you use. [1]

QuantityUsing r and hUsing a and h
Volumeπ h² (3r − h) ÷ 3π h (3a² + h²) ÷ 6
Curved area2π r hπ (a² + h²)

The cited page lists only the curved area. The flat base is a circle of area π a², and the total surface area is the curved area plus the base area. That last step is our own working.

How to use the spherical cap calculator

  1. Choose whether you know the sphere radius r or the base radius a.
  2. Enter that radius and the cap height h in the same unit.
  3. Press Calculate.
  4. Read the volume, curved area, base area, total surface area and the radii you did not enter.

If you give the sphere radius, h can be anything up to 2r, the full diameter. A height equal to r is a hemisphere. A height of 2r is the whole sphere. If you give the base radius, the calculator finds r from the second relation above.

Worked example

A sphere of radius 5 cm is cut so that the cap is 2 cm high.

QuantityWorkingResult
Base radius asquare root of 2 × (10 − 2)4 cm
Volumeπ × 4 × 13 ÷ 354.4543 cm³
Curved area2π × 5 × 262.8319 cm²
Base areaπ × 1650.2655 cm²
Total surface62.8319 + 50.2655113.097 cm²

Check using a and h: volume = π × 2 × (48 + 4) ÷ 6 = 54.4543, and curved area = π × (16 + 4) = 62.8319. Both agree.

Where spherical caps appear

  • Domes and roofs. Roof area and the air volume under a dome come from cap formulas.
  • Tanks. The rounded ends of pressure vessels and the liquid left in a partly filled spherical tank.
  • Optics. Lenses have caps for their curved surfaces.
  • Geography. The area of a polar region is a similar problem.
  • Cooking and packaging. A bowl or a half-filled round flask.

Limits and tips

  • The cap height h can never exceed the sphere diameter 2r.
  • When h equals r the cap is a hemisphere, with volume 2πr³ ÷ 3. Compare with the hemisphere volume calculator.
  • When only the base radius a is known, h must be given too. Many caps share the same a with different h.
  • A larger cap with h above r has a base radius smaller than r again.
  • Keep one length unit. Volumes come out in cubic units.

Common mistakes

  • Using the diameter instead of the radius.
  • Measuring h along the slanted surface instead of straight up from the base.
  • Treating the base radius as the sphere radius.
  • Forgetting to add the flat base when you want the total surface.

For the whole sphere use the sphere calculator. For a pipe-like solid see the cylinder calculator and the capsule volume calculator.

Choosing between the two input modes

Use the sphere radius mode when you know the full sphere the cap came from, such as a tank of known radius filled to a known depth. Use the base radius mode when you can measure the flat circle and the rise of the dome, such as a roof or a bowl lying on a table. Both modes give the same answers for the same cap, as the worked example shows.

Partly filled spherical tanks

The liquid in a partly filled spherical tank forms a cap of height h. The cap volume formula therefore gives the amount of liquid, and subtracting it from the whole sphere volume gives the empty space. Measure h from the lowest point inside the tank up to the liquid surface. A height of one radius means the tank is half full. These numbers are estimates, so allow for the tank wall and for fittings inside.

Domes and shells

For a dome built over a circular floor, the base radius is half the span and the height is the rise. The curved area is the surface you would cover with roofing or paint, and the volume is the space under it. The calculator also returns the matching sphere radius, which is the radius of the template or the formwork you would need to cut the curve.

The spherical cap calculator turns two measurements into the volume and areas of a dome, bowl or lens in one step.

What next

Use this often? Add Spherical Ca to your Home screen.

Frequently asked questions

What is the spherical cap volume formula?

With sphere radius r and height h, the volume is pi times h squared times (3r minus h), divided by 3. With base radius a it is pi times h times (3a squared plus h squared), divided by 6.

How do I find the curved area in a spherical cap calculator?

The curved area is 2 times pi times r times h, which also equals pi times (a squared plus h squared).

How is the base radius related to the sphere radius?

a squared equals h times (2r minus h). Equivalently r equals (a squared plus h squared) divided by 2h.

Is a hemisphere a spherical cap?

Yes. It is the cap whose height equals the sphere radius.

Does the total surface area include the flat base?

In this calculator, yes. The total is the curved area plus the circular base area, and each is also shown separately.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools