Saved

Press the star next to a tool's name to save it.

All my tools

Reaction Time Calculator

Use this reaction time calculator to find your reaction time from the ruler drop test: enter the catch distance in inches or centimetres and get the time in milliseconds.

Restored your last values ·

Choose inches or centimetres. Enter how far the ruler fell before you caught it, read at your fingers. Add up to four more catches to get an average.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the distance the ruler fell before you caught it, then press Calculate.

See full result

A reaction time calculator turns the distance a dropped ruler falls into the time it took you to catch it. Enter the reading where your fingers closed, in inches or centimetres, and add up to five catches to see your average in milliseconds.

How to use the reaction time calculator

  1. Choose inches or centimetres.
  2. Enter the distance of your first catch.
  3. Add up to four more catches for an average.
  4. Press Calculate.

The ruler drop test

This is the usual setup, described here in our own words. A friend holds a ruler vertically with its zero mark at the bottom, while you hold your thumb and index finger about 8 centimetres apart on either side of the zero mark and keep your arm steady. Your friend drops the ruler without warning, you close your fingers as fast as you can, and you read the mark at your fingers.

The formula

A dropped ruler falls freely from rest, so with air resistance ignored the distance is d = ½ g t² [2]. Solving for the time gives t = √(2d ÷ g). The tool uses g = 9.81 metres per second squared, a rounded value of standard gravity, which is defined as 9.80665 metres per second squared [3]. The calculator converts your reading to metres, applies the formula and shows the time in milliseconds and seconds.

A worked example

A worked example is a catch at 26 centimetres. Twice the distance is 0.52 metres, divided by 9.81 gives about 0.053, and the square root is about 0.230 seconds, or 230 milliseconds. Enter 26 in metric mode and the calculator gives 230.2 milliseconds, the same figure before rounding. In US mode, a catch at 10.2 inches gives about 230 milliseconds as well.

Averaging several catches

One catch is not very reliable. Repeating the drop and averaging the times gives a steadier figure, so this tool takes up to five attempts. It turns each catch into a time and averages the times, not the distances. With catches of 10 and 20 centimetres, the times are 142.8 and 201.9 milliseconds, and the average is 172.4.

How your time compares

Human response times on simple reaction time tasks are usually on the order of 200 milliseconds. For college-age people the mean is about 190 milliseconds for a visual stimulus and about 160 milliseconds for a sound [1]. The tool shows how far your time is above or below the 190 millisecond visual figure. A ruler catch also includes the time it takes to close your fingers, so a result a little above it is normal.

Cue words

A harder variation is also possible. Pick a cue word, such as a made-up one, and have your friend say a series of words as they drop the ruler. You should only try to catch it when the cue word is said, and attempts that were not on the cue are left out of the average. This tests attention as well as reflexes. Enter only the valid catches.

Other living things

Some animals react far faster than people. We give no figures for them here. A person using a ruler will not match them, because the signal has to travel from the eye to the brain and down the arm.

Getting reliable results

Rest your forearm on a table, keep your eyes on the ruler, and have your friend vary the time before the drop, so you cannot guess it. Do not catch with your whole hand, only with the thumb and finger. Read the mark at the top of your thumb. Discard a catch if you moved before the ruler fell. Repeat at least five times. These tips are our own.

Units

In US mode the distance is in inches, and in metric mode in centimetres. The tool converts inches to metres with 1 inch = 0.0254 metres, which is the exact definition and our own addition. Results are shown in milliseconds, with the time in seconds next to them. Enter the distance the ruler fell, not the position of your fingers on the scale if the zero mark is not at the bottom.

Limits of the test

The test measures a simple visual reaction with one hand. It is not the same as the reaction time of a driver or an athlete, which depends on the situation, on choice and on attention. The tool follows the stated formula and does not claim to measure anything else. It cannot judge fitness to drive or play sport, so use it just for fun or as a classroom activity.

Distance and time

Because the ruler falls from rest, the distance grows with the square of the time [2]. A catch at 10 centimetres means about 143 milliseconds, and one at 20 centimetres about 202 milliseconds, so doubling the distance raises the time by only about 41 percent. This is why small differences in reading the ruler matter less than you might expect, and why the scale of a ruler drop test is so compressed.

Using it in a class

The test suits a classroom or a family game. Each person takes five catches, enters them, and compares the averages. Our own suggestion is to compare each person with their own earlier average, rather than with others, since hand size and practice affect the result. Do not use the results to judge anyone's health or driving.

Common mistakes

  • Reading the ruler at the wrong spot. Read at the top of the thumb.
  • Averaging the distances instead of the times. Average the times.
  • Letting the friend give a signal. The drop must be a surprise.
  • Using centimetres in US mode. Check the unit switch.

What next

Use this often? Add Reaction Tim to your Home screen.

Frequently asked questions

What is a reaction time calculator?

A tool that turns the distance a dropped ruler fell into the time you took to catch it.

What is the ruler drop formula?

t = √(2d ÷ g), with g = 9.81 m/s² and d the distance the ruler fell in metres.

What is a good reaction time in the ruler drop test?

Simple reaction times are usually around 200 milliseconds, and about 190 milliseconds for a visual stimulus in young adults.

How far does the ruler fall for 200 milliseconds?

About 19.6 centimetres, from d = ½ g t².

How many catches should I average?

This tool takes up to five, and averaging several catches is more reliable.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Health & Fitness Tools