This reverse video tool plays a short clip backwards, picture and sound, and saves the result as an MP4, in your browser.
How reverse video works
FFmpeg reverses a clip with the reverse filter for the picture and the areverse filter for the sound. [1] A normal player reads frames from the start and throws them away once shown. To play backwards the last frame has to be known before the first one is written, so the whole clip must be held in memory as decoded pictures. That is why the filter is only practical for short clips and why this tool refuses videos over 60 seconds.
Worked example
A 10 second clip of a ball falling to the floor becomes a clip of the ball rising from the floor back to the hand, and speech turns into the familiar reversed gibberish. The output is also 10 seconds long, because only the order changes. A silent clip has no audio to reverse, so the tool retries without sound and still gives you a reversed MP4.
Memory and length
| Video | Rough memory use | Works here |
|---|---|---|
| 10 s at 720p | Low | Yes |
| 30 s at 1080p | Moderate | Yes |
| 60 s at 1080p | High | Yes, but may be slow |
| 2 min at 1080p | Very high | No, trim it first |
The output is H.264 video with AAC audio in an MP4 container. [2] Reduce a 4K clip with the video resizer if reversing stalls.
Reverse video tips
- Cut out the part you want with the video trimmer first, then reverse it.
- Action that looks funny backwards works best: pouring, splashes, jumps, diving.
- Combine the reversed clip with the original in an editor to build a forward and backward boomerang effect.
- If the browser runs out of memory, close other tabs or lower the resolution.
Privacy, limits and the FFmpeg core
This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [3] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your video is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.
Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.
Step by step with the reverse video
- Press the upload box and choose a clip of up to 60 seconds.
- Press Reverse video.
- Wait while the whole clip is loaded and reversed.
- Download the MP4.
- Play it to check the effect.
Who uses the reverse video
Creators make rewind effects and impossible looking shots, teachers show a process backwards, and people make jokes by reversing speech or a splash that becomes a splash going back up.
Common mistakes to avoid
- Trying a clip longer than 60 seconds.
- Reversing a high resolution clip on a phone with little memory.
- Expecting the sound to stay readable; reversed speech is not.
- Reversing a video you did not trim first.
Quality, formats and browser notes
Every video this site writes is encoded with the x264 or equivalent encoder at a constant quality, so the picture looks close to the source while the size stays sensible. Most outputs use an MP4 container with H.264 video and AAC audio because that pairing plays on nearly every phone, TV, browser and editor. Chrome, Edge, Firefox and Safari on a computer all run the converter; phones can run it too, but a long clip may be slow or stop if the browser runs short of memory. If that happens, close other tabs, use a shorter clip or work from a computer.
Why reversing is demanding
Normal playback decodes frames one by one and forgets them. Reverse playback has no such luxury, since the last frame must come out first. The reverse filter therefore stores all frames of the clip uncompressed in memory. One second of 1080p video at 30 frames per second is about 187 MB uncompressed, so even a short clip can use a lot of memory, which is why the page asks you to keep clips short.
If something goes wrong
If the page says the converter could not be loaded, check your internet connection, because the 10 MB core is fetched the first time you use it, and reload the page. If the job fails on a particular file, it may be damaged or use a codec that this browser build of FFmpeg does not include; try opening it in a media player first. If the page stops with a memory error, the file is too large for the browser, so trim it, resize it or use a computer with more memory. Pressing Stop ends the job at once and frees the memory, and you can start again with other settings.
What next
Use this often? Add Reverse Vide to your Home screen.
Frequently asked questions
How do I use reverse video?
Choose a clip up to 60 seconds and press Reverse video. The picture and sound both play backwards in the new MP4.
Why is there a 60 second limit?
The reverse filter must keep every frame in memory. Longer clips can exhaust a browser tab.
Is the audio reversed too?
Yes. Both the picture and the sound are reversed. A silent video gives a reversed picture only.
Can I reverse only part of a video?
Trim the part first with the video trimmer, then reverse the trimmed clip.
Is the video uploaded?
No. It is processed locally in your browser.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.