Saved

Press the star next to a tool's name to save it.

All my tools

Resultant Force Calculator

Use this resultant force calculator to add two or three forces or velocities that act at angles and find the size, direction and components of the resultant vector.

Restored your last values ·

°
°
°

Choose forces or velocities. Enter the size and the angle (from the +x axis, counterclockwise) of two vectors, and optionally a third. You get the size and direction of the resultant and its x and y components.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the size and angle of at least two vectors, then press Calculate.

See full result

A resultant force calculator adds two or three forces that act at different angles and gives the single force that has the same effect. The same method adds velocities, so it also works as a resultant velocity calculator. Enter the size and the angle of each vector and read off the size, the direction and the components of the resultant.

How to use the resultant force calculator

  1. Choose forces or velocities, and US or metric units.
  2. Enter the size and angle of vector 1 and vector 2.
  3. Add a third vector if you need one.
  4. Press Calculate.

What the resultant is

The resultant, or net force, is the sum of all the forces that act on an object [1]. A force is a vector, with a size and a direction, so the forces cannot simply be added as numbers; they are added as vectors [1]. The Wikipedia article shows this with the parallelogram rule, where the diagonal of the parallelogram built on two forces is their sum [1]. The calculator does it with components.

Components

Each vector is split into an x part and a y part: Fx = F cos θ and Fy = F sin θ, with the angle θ measured from the positive x axis. The x parts are added to give Σx, and the y parts are added to give Σy. Vectors are added by adding their components [2]. This turns a problem with directions into two sums of ordinary numbers. The calculator shows both sums, so that you can check them against your own working.

Size and direction

The size of the resultant is √(Σx² + Σy²), which is the Pythagorean length of a vector [2], and the direction is the angle whose tangent is Σy ÷ Σx. A plain arctangent only returns angles between −90° and 90° [3]. This tool uses atan2, which uses the signs of both sums to find the correct quadrant [3], and shows the angle from 0° to 360°. The result for the two opposite forces below is 180°.

Worked example: forces

Two forces act in opposite directions, 10 N at 0° and 15 N at 180°. The x parts are 10 and −15, the y parts are both 0, so the resultant is 5 N at 180°, pointing along the larger force. Forces along one line simply add or subtract. If the two forces are equal, the resultant is zero and the calculator says the vectors cancel.

Worked example: velocities

A boat moves at 15 km/h at 0°, and a current of 7 km/h flows at 90°. The resultant has x part 15 and y part 7, so its size is √(15² + 7²) = 16.55 km/h and its direction is 25.02°. A second example is 3 m/s at 30° and 6 m/s at 60°, for a resultant of 8.7 m/s at 50°. Both can be entered here to check the tool.

Up to three vectors

This page takes up to three vectors. That covers most textbook problems, such as a mass hanging on two ropes plus a wind load. If you have more, add the first three, then use the result as vector 1 in a second run with the others.

Equilibrium

When the resultant force is zero, an object that is at rest stays at rest, and an object that moves keeps its velocity, because there is no net force to change it [4]. To balance a set of forces, find the resultant and apply a force of the same size in the opposite direction, which is your angle plus 180°. The calculator prints the resultant so that you can read that angle.

Units

Choose US or metric. Forces are in pounds-force or newtons, velocities in miles per hour or kilometres per hour, and the angles are in degrees. The calculation itself does not change with the unit, so the answer is in the same unit as the inputs. Do not mix units within a run: convert all the vectors to one unit first.

Limits

The tool works in two dimensions only. In three dimensions, a third angle or a third component is needed. For forces, the resultant is the net force only when you include every force on the object, such as weight, friction and normal force. For velocities, the sum is a vector sum, which is not the same as an average velocity.

Using the calculator

Pick forces or velocities, enter the size and angle of each vector from the same axis, and press Calculate. Check that the angle is counterclockwise from the positive x axis. For a drawing with the y axis pointing down, flip the sign of the angles. Try swapping the order of the vectors: the sum is the same, as vector addition does not depend on order.

Checking a result by drawing

You can check any answer with a scale drawing. Draw the first vector from the origin, start the second at its tip, and join the origin to the end of the last one. That line is the resultant, and its length and angle should match the calculator. This is the tip-to-tail form of the parallelogram rule [1], and it gives the same sum because the order of the vectors does not matter.

Common mistakes

  • Measuring angles from different axes. Use the +x axis for all of them.
  • Adding the sizes as plain numbers. Vectors add by components.
  • Using a plain arctangent. It loses the quadrant.
  • Mixing newtons and pounds-force. Use one unit throughout.

What next

Use this often? Add Resultant Fo to your Home screen.

Frequently asked questions

What is a resultant force calculator?

A tool that adds forces acting at different angles and gives the single equal force, with its size and direction.

How do you find the resultant of two forces?

Split each into x and y parts, add the parts, then find the size with Pythagoras and the angle with atan2.

Can it find the resultant velocity?

Yes, choose velocities: the same vector addition gives the resultant velocity.

What does a zero resultant mean?

The forces balance and the object keeps its state of motion.

Why is the angle shown from 0 to 360 degrees?

So that the direction is correct in every quadrant, not only to the right.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters